Directional Boring Contractors in Kleberg County, TX

Trinity Boring Solutions is a directional boring contractor serving Kleberg County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Kingsville. The Trinity main office in Yukon, Oklahoma is about 620 road miles from Kingsville, the county seat. Bores here most often pass under US 77 and State Highway 141, Santa Gertrudis Creek and Union Pacific track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Kleberg County, Texas

Type the address of your job in Kleberg County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Kleberg County?

Kleberg County covers 881 square miles, has about 30,442 residents and sits in the TxDOT Corpus Christi District.

County seatKingsville
Population30,442 (2024 Census estimate), down 1.9% since 2020
Land area881 square miles
Largest cities and townsKingsville (24,884)
TxDOT districtTxDOT Corpus Christi District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas Central and Nueces Electric Cooperative
Interstate and US highwaysUS 77
State Highways141 and 285
State loops and spursSpur 169
Creeks and other streamsSanta Gertrudis Creek, Jaboncillos Creek, San Fernando Creek, Santa Gertruidis Creek, Ebanito Creek, Tranquitas Creek, Los Olmos Creek and Salado Creek
LakesComitas Lake
RailroadsUnion Pacific, about 21 main line miles
Average precipitation27.3 inches a year (1991 to 2020)
New housing units permitted18 in 2025
Road distance from Trinity main officeAbout 620 miles from Yukon, Oklahoma to Kingsville
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Kleberg County?

A bore in Kleberg County most often has to cross a highway such as US 77, State Highway 141 or State Highway 285, a stream such as Santa Gertrudis Creek or Jaboncillos Creek and Union Pacific track. State Highways 141 and 285 also run through the county, along with Spur 169. The Census map names 19 larger streams in Kleberg County, led by Santa Gertrudis Creek, Jaboncillos Creek, San Fernando Creek, Santa Gertruidis Creek, Ebanito Creek and Tranquitas Creek. The rest are Los Olmos Creek, Salado Creek, Escondido Creek, Arana Creek, Radicha Creek, Chiltipin Creek, Paisano Creek, Tunas Creek, Vattman Creek, Fernando Creek, Derramadero de Machos Creek, Carretta Creek and Carreta Creek. Comitas Lake is the main mapped lake. The federal rail map shows about 21 miles of main line track in Kleberg County, owned by Union Pacific.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Kleberg County?

The ground in Kleberg County is mixed: according to the federal soil survey, fine sandy loam is the most common surface soil, a clay rich layer shows up in the top five feet on about 32 percent of the county and sandy layers on about 30 percent. Tooling and drilling fluid for a bore in Kleberg County are matched to what potholing finds on the path. September is the wettest month in Kleberg County at 4.9 inches on average and February the driest at 1.3. Kleberg County averages 27.3 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Victoria (12%), Palobia (12%) and Colmena (8%).
  • Surface texture: most often fine sandy loam (23%) or clay (18%).
  • Bedrock within 5 feet: rare, on less than 1% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 32% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 30% of the county.
  • Seasonal water table within 5 feet: about 19% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Kenedy and Kleberg Counties, Texas (survey area TX613, version 27, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Kleberg County?

The TxDOT Corpus Christi District permits bores under state highways in Kleberg County, the Kleberg County Commissioners Court handles county roads, and Kingsville handles its own streets.

  • State highways. US 77, the other numbered state routes and the farm to market roads in Kleberg County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under Union Pacific track in Kleberg County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under Santa Gertrudis Creek or Comitas Lake is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Kleberg County?

AEP Texas Central and Nueces Electric Cooperative serve Kleberg County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas Central is an investor owned utility; Nueces Electric Cooperative is a member owned cooperative. Knowing which one holds the territory at the address is the first step on a conduit bore in Kleberg County. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Kleberg County?

Kleberg County permitted 18 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Kleberg County went from 31,040 in 2020 to 30,442 in 2024, a loss of 1.9 percent. Most bore work in Kleberg County is replacement and upgrade of lines already in the ground.

Which Cities and Towns in Kleberg County Does Trinity Serve?

Trinity takes directional boring work in Kingsville, the only incorporated place in Kleberg County with about 24,884 residents, and at sites outside the city limits.

City or town2024 population
Kingsville24,884

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Kleberg County.

Kleberg County borders Brooks County, Jim Wells County, Kenedy County and Nueces County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Falfurrias (Brooks), Alice (Jim Wells), Sarita (Kenedy) and Corpus Christi (Nueces).

Which Directional Boring Services Are Available in Kleberg County?

Every Trinity service is available in Kleberg County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Kleberg County job before you call.

Kleberg County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Kingsville, Texas?

Yes. Trinity Boring Solutions takes work in Kingsville and the rural parts of Kleberg County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 77 in Kleberg County?

The TxDOT Corpus Christi District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Kleberg County Commissioners Court and city streets through the city.

Is there rock in Kleberg County?

Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Kleberg County. Potholing confirms it on the actual bore path.

Can a line be bored under Santa Gertrudis Creek in Kleberg County?

Yes. A drill is steered below the bed of Santa Gertrudis Creek from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Kleberg County?

Union Pacific, with about 21 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Kleberg County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Kleberg County?

Footage and pipe size set a general range. Depth, the crossings and the ground set the number.

How Do You Get a Bore Quote in Kleberg County?

Call (405) 409-7423 any time or send the address in Kleberg County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.