Directional Boring Contractors in Newton County, TX
Trinity Boring Solutions is a directional boring contractor serving Newton County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Newton. From the Trinity main office in Yukon, Oklahoma it is about 466 road miles southeast to Newton, the county seat. The usual crossings in Newton County are US 190 and State Highway 87, the Sabine River and Canadian Pacific Kansas City track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Newton County, Texas
Type the address of your job in Newton County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Newton County?
Newton County covers 934 square miles, has about 11,908 residents and sits in the TxDOT Beaumont District.
| County seat | Newton |
|---|---|
| Population | 11,908 (2024 Census estimate), down 2.5% since 2020 |
| Land area | 934 square miles |
| Largest cities and towns | Newton (1,571) |
| TxDOT district | TxDOT Beaumont District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Entergy Texas, Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative |
| Interstate and US highways | US 190 |
| State Highways | 12, 63 and 87 |
| State loops and spurs | Loop 505 |
| Rivers | Sabine River |
| Creeks and other streams | Big Cow Creek, Little Cow Creek, Caney Creek, Quicksand Creek, Slaydons Creek, Nichols Creek, Mill Creek and Little Quicksand Creek |
| Lakes | Toledo Bend Reservoir |
| Railroads | Canadian Pacific Kansas City and short line railroads, about 23 main line miles |
| Average precipitation | 58.6 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 466 miles from Yukon, Oklahoma to Newton |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Newton County?
A bore in Newton County most often has to cross a highway such as US 190, State Highway 87 or State Highway 63, a stream such as the Sabine River, Big Cow Creek or Little Cow Creek and Canadian Pacific Kansas City track. State Highways 12, 63 and 87 also run through the county, along with Loop 505. The Census map names 25 larger streams in Newton County, led by Big Cow Creek, the Sabine River, Little Cow Creek, Caney Creek, Quicksand Creek and Slaydons Creek. The rest are Nichols Creek, Mill Creek, Little Quicksand Creek, Davis Creek, Little Cypress Creek, Yellow Bayou, Big Cypress Creek, McGraw Creek, Cat Creek, Threemile Branch, Hunter Creek, Dry Creek, Trout Creek, East Branch White Oak Creek, Thickety Creek, Clear Creek, East Prong McKim Creek, Hassle Branch and Mellons Creek. Toledo Bend Reservoir is the main mapped lake. The federal rail map shows about 23 miles of main line track in Newton County: Canadian Pacific Kansas City about 6 miles and short line and other operators about 17.

What Is the Ground Like for Directional Boring in Newton County?
Shallow groundwater is the main thing to plan for in Newton County: the federal soil survey records a seasonal water table within five feet of the surface on about 43 percent of the county. On wet Newton County ground the entry and exit pits are kept small and the bore is sealed with drilling fluid. December is the wettest month in Newton County at 5.5 inches on average and February the driest at 4.4. Newton County averages 58.6 inches of precipitation a year, so wet weather and water in the pits are planned for.
- Most common soils: Tehran (8%), Otanya (6%) and Letney (6%).
- Surface texture: most often fine sandy loam (21%) or loamy sand (15%).
- Bedrock within 5 feet: about 3% of the county. Most of it is soft, weathered rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 25% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 33% of the county.
- Seasonal water table within 5 feet: about 43% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Jasper and Newton Counties, Texas (survey area TX611, version 24, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Newton County?
The TxDOT Beaumont District permits bores under state highways in Newton County, the Newton County Commissioners Court handles county roads, and Newton handles its own streets.
- State highways. US 190, the other numbered state routes and the farm to market roads in Newton County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Canadian Pacific Kansas City or short line track in Newton County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Sabine River, Big Cow Creek or Toledo Bend Reservoir is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Newton County?
Entergy Texas, Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative serve Newton County, according to 2025 filings with the U.S. Energy Information Administration. Entergy Texas is an investor owned utility; Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Newton County is planned. More on electric line boring for electric cooperatives.
Is Newton County Growing?
The population of Newton County went from 12,218 in 2020 to 11,908 in 2024, a loss of 2.5 percent. In Newton County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Newton County Does Trinity Serve?
Trinity takes directional boring work in Newton, the only incorporated place in Newton County with about 1,571 residents, and at sites outside the city limits.
| City or town | 2024 population |
|---|---|
| Newton | 1,571 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Newton County.
Newton County borders Jasper County, Orange County, Sabine County, Beauregard Parish, Louisiana, Calcasieu Parish, Louisiana, Sabine Parish, Louisiana and Vernon Parish, Louisiana; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Jasper (Jasper), Orange (Orange) and Hemphill (Sabine).
Which Directional Boring Services Are Available in Newton County?
Every Trinity service is available in Newton County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 190, State Highway 87 and Big Cow Creek
- Bores under Canadian Pacific Kansas City track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Newton and on rural water systems
- Underground conduit in Entergy Texas and Deep East Texas Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 190
- Municipal boring services for Newton
The free Bore Planner sizes a Newton County job before you call.
Newton County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Newton, Texas?
Yes. Trinity Boring Solutions takes work in Newton and the rural parts of Newton County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 190 in Newton County?
The TxDOT Beaumont District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Newton County Commissioners Court and city streets through the city.
Is there rock in Newton County?
Not much. The federal soil survey records bedrock within five feet of the surface on about 3 percent of Newton County. Potholing confirms it on the actual bore path.
Can a line be bored under the Sabine River in Newton County?
Yes. A drill is steered below the bed of the Sabine River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Newton County?
Canadian Pacific Kansas City and short line operators, with about 23 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Newton County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Newton County?
Footage and pipe size set a general range. Depth, the crossings and the ground set the number, and shallow groundwater is a factor on many Newton County jobs.
How Do You Get a Bore Quote in Newton County?
Call (405) 409-7423 any time or send the address in Newton County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.