trinityboringsolutions.com

Newton Texas Directional Boring: Pinetucky Soil, Caney Creek and US 190

Quick Answer: Newton’s top five feet maps from fine sandy loam at the surface to sandy clay loam at about 40 inches, and the geologic map identifies the Willis Formation. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes involving Caney Creek and Newton’s highways. Court Street is part of the 459 road miles from our Yukon, Oklahoma main office. Pinetucky soil covers 52% of the mapped area, so sticky clay can affect reaming and pipe pullback.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Newton bores at a glance

  • County seat of Newton County, Texas. Population 1,571 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 459 miles, about 9.6 hours of driving.
  • Ground: Pinetucky soil is mapped on 52 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 190, Texas State Highway 87, Loop 505, FM 1012 and FM 2626. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Caney Creek, Big Cow Creek, Quicksand Creek and Hackberry Branch.
  • Public water: City of Newton, groundwater wells.
  • Electric: City of Newton municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring along Court Street in Newton?

Newton’s mapped ground shifts from fine sandy loam at the surface to sandy clay loam at about 40 inches, and Trinity Boring Solutions takes directional boring jobs here. Newton is the Newton County seat, with a population of 1,571 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber on routes such as Court Street, US 190 and Texas State Highway 87.

Our main office is in Yukon, Oklahoma, and Newton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike, a record that matters around the City of Newton water system and municipal electric lines. Our family business started in 1965, and we have done directional boring since 1982; we plan Newton crossings with Caney Creek in mind.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Pinetucky soil affect a bore in Newton?

Pinetucky is the leading mapped soil series in Newton, covering 52% of the area; the USDA soil survey also maps the Pinetucky-Doucette association across 52%. At the surface, fine sandy loam covers 55% and loamy fine sand covers 28%. At about 40 inches, sandy clay loam is mapped under 77% of the area, while loamy fine sand accounts for 14%. Average clay content at that depth is 23%, and sandy ground is mapped across 16%. These are soil survey patterns, not test borings, so the bore route still needs site specific planning.

USDA soil survey, inside the Newton city limitsWhat is mapped
Soil series mappedPinetucky 52 percent, Doucette 14 percent, Shankler 14 percent, Otanya 8 percent and Mantachie 4 percent
Texture at the surfacefine sandy loam 55 percent, loamy fine sand 28 percent and very fine sandy loam 8 percent
Texture about 40 inches downsandy clay loam 77 percent, loamy fine sand 14 percent and loam 4 percent
Engineering class about 40 inches downlean clay (CL) 67 percent, silty sand (SM) 14 percent and clayey sand (SC) 14 percent
Average clay content about 40 inches down23 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches12 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel5 percent of the area

Bedrock is not mapped in the top five feet of Newton, but that does not rule out rock deeper down. The geologic map lists the Willis Formation, with a Cenozoic unit and a Pliocene unit; its clay, silt, sand and gravel can change with depth. Seasonal water table conditions are mapped within 60 inches in 12% of the area, and flood prone soils cover 8%, so Caney Creek work needs depth and water planning. High steel corrosion risk is mapped in 5% of the area; the line owner should consider casing and tracer wire materials.

How do crews handle Newton’s sandy clay loam?

We bore Newton’s mapped sandy clay loam with controlled fluid and staged reaming, because the USDA soil survey maps it across most of the area at about 40 inches.

  1. At a Pinetucky route, we keep drilling fluid suited to the clay and ream in stages so sticky soil is less likely to grip the pipe.
  2. Where the USDA survey maps loamy fine sand, we use staged reaming and have the pipe ready before the final pass to limit time with an open hole.
  3. For low areas near Caney Creek, we plan for mapped seasonal water and flood prone soils, keeping pits small and pumping them if water collects.
  4. At a Court Street crossing, we hydrovac expose marked utilities before drilling near them, then track the drill head from the surface and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross near Caney Creek in Newton?

Newton bores may need to pass beneath US 190, Texas State Highway 87, Loop 505, FM 1012 or FM 2626, all mapped within the city limits. The TxDOT Beaumont District is the state office named for Newton County. Court Street is the longest named street at 4.17 miles, followed by Davison Street at 2.43 miles and Kaufman Street at 1.33 miles. A route beneath pavement can use a bore rather than an open cut, while the exact path and cover depend on the road and utility.

CrossingTypeMapped extentWho has a say
US 190US highway6.4 roadway miles insideState highway office
Texas State Highway 87State highway5.8 roadway miles insideState highway office
Loop 505State highway2.9 roadway miles insideState highway office
FM 1012State highway0.4 roadway miles insideState highway office
FM 2626State highway0.2 roadway miles insideState highway office
Caney CreekStream1.42 channel miles insideChecked for Corps of Engineers jurisdiction
Big Cow CreekStream0.72 channel miles insideChecked for Corps of Engineers jurisdiction
Quicksand CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Hackberry BranchStream0.31 channel miles insideChecked for Corps of Engineers jurisdiction
Threemile BranchStream0.23 channel miles insideChecked for Corps of Engineers jurisdiction
Hassle BranchStream0.14 channel miles insideChecked for Corps of Engineers jurisdiction
Mellons CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Davis CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Newton or within one mile outside the city limits, and no street and rail crossings are mapped there. Caney Creek runs 1.42 channel miles inside Newton; Big Cow Creek and Quicksand Creek are also mapped within the limits. Public records map 10 street crossings of named streams in the city. No lakes or ponds are mapped within one mile, so creek and drainage locations matter more to route planning than a lake crossing.

Who approves a Newton County bore under US 190?

For work in Newton County road right of way on US 190, Texas State Highway 87, Loop 505 or the farm to market roads, TxDOT reviews the utility permit through its Beaumont District. The line owner, not the drilling contractor, files in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT cover rules set different depths by line type, including 60 inches at highway crossings for electric and communication lines and water lines, and 60 inches for pressurized sewer crossings. For boring work on Court Street, we account for the fact that Newton’s city streets belong to the city. A Caney Creek route is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Newton water system?

The City of Newton owns the public water system, which uses groundwater wells and reports 908 service connections serving 2,724 people. That network may be part of the utility picture along Court Street or US 190, but the route and existing lines need to be checked for each job. The city also owns its municipal electric system, which reports 1,038 customers. The line owner should confirm conduit specifications before an electric conduit bore is planned.

Line ownerWhat it isSourceSize
City of NewtonPublic water systemGroundwater wells908 connections, 2,724 people served
City of Newton municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,038 customers reported
Entergy Texas, Deep East Texas Electric Cooperative and Jasper-Newton Electric CooperativeElectric utilities reporting service in Newton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Newton’s median housing year at 1976; 22% of homes were built before 1960, 62% from 1960 to 1999 and 16% in 2000 or later. That mix can mean a bore serves either a replacement line or a newer service near Davison Street. Before the drill approaches a marked utility anywhere on the Newton route, we expose it with hydrovac because locate paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Newton, including Jasper?

Newton is the county seat of Newton County, Texas, at an elevation of 205 feet and within 5.44 square miles. ZIP code 75966 serves Newton in Newton County, helping us identify the service area when coordinating underground boring plans. Jasper is 15.0 miles west and is the nearest larger city; Kirbyville is 15.9 miles southwest, and Sam Rayburn is 22.4 miles northwest. From our Yukon, Oklahoma main office, Newton is 459 road miles away and a 9.6 hour drive, so we plan mobilization accordingly. Those distances are part of planning mobilization for work in Newton and nearby rural areas.

Places near Newton

What would we bore near Davison Street in Newton?

  • Highway crossing: A bore beneath US 190 can keep a utility route out of the existing pavement, with the line owner arranging the TxDOT permit.
  • Street service: A water or sewer service near Davison Street can use a bore to avoid cutting the street surface.
  • Creek crossing: A Caney Creek route needs a planned profile that stays beneath the channel, with jurisdiction checked during planning.
  • Fiber conduit: A conduit run along Court Street needs marked utilities exposed before drilling near the route.
  • Water connection: A service near the City of Newton water system needs the existing groundwater network located before choosing the bore path.
  • Airport route: A utility route near Newton Municipal Airport needs its access and crossings included in the site plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Newton bore near US 190?

For a Newton quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how a route near US 190 or Court Street meets pavement, property access and existing lines. Include the crossing point if the route approaches Caney Creek.

The job scope shapes the price, starting with mobilization from the 459 road miles between Newton and Yukon. Pinetucky soil and its sandy clay loam can change reaming and fluid needs. A route beneath US 190, concrete or pavement, or Caney Creek adds crossing considerations. We also account for bore length, pipe size, utilities to expose, pits, excavator time and sand backfill. Emergency timing or a high profile route can add planning demands.

Questions people ask about boring in Newton

Does Trinity take directional boring jobs in Newton County, and who staffs them?

Trinity Boring Solutions takes directional boring work in Newton County. Our own crews and crews from partner drilling contractors Trinity has personally vetted can staff Newton work, while customers deal with Trinity from the first call through the bore log. That keeps planning connected to the bore even when a partner crew is on site.

Will a bore in Newton hit rock below the soil?

Bedrock is not mapped in Newton’s top five feet, but that does not rule out deeper rock. The geologic map identifies the Willis Formation, with clay, silt, sand and gravel. A route near Court Street still needs to be evaluated at its planned depth rather than inferred from the soil survey alone.

Who approves a Newton bore under US 190?

The line owner applies for a right of way utility permit through TxDOT’s RULIS system, and the TxDOT Beaumont District reviews work on US 190 in Newton County. For a US 190 crossing, we provide the bore plan and profile the owner needs for the application. The permit sets the crossing conditions, including any required cover depth.

Can a Newton utility line be bored under Caney Creek?

A line can be planned beneath Caney Creek, which runs 1.42 channel miles within Newton. The route needs a profile that stays below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped stream crossings make the route specific to the site.

Who runs Newton’s public water system, and does it draw from groundwater wells?

The City of Newton owns the public water system, sourced from groundwater wells, and we consider the Pinetucky soil series in boring plans. Public records report 908 service connections and a population served of 2,724. A bore near Court Street should be planned around the existing water network and any marked lines on the proposed path.

Who owns electric lines in Newton County, and who confirms conduit specs?

The City of Newton owns the municipal electric system, which reports 1,038 customers. Entergy Texas, Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative also report electric service in Newton County. Confirm the line owner and conduit specifications for the particular route before planning a bore near US 190.

Does Trinity cover Jasper and rural sites outside Newton?

Yes, we take work in Newton and across Texas, including nearby Jasper and rural routes outside the city limits. Jasper is 15.0 miles west of Newton, and Kirbyville is 15.9 miles southwest. The planned address and route determine the crew and mobilization needed for each job.

How much notice does Texas811 need for a Newton bore near Court Street?

For a bore near Court Street, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.

What affects the price of a Newton directional bore near US 190?

Price depends on the Newton job’s length, pipe or conduit size, Pinetucky ground, pavement, crossings and utilities that need exposure. A route under US 190 or near Caney Creek may add planning and crossing work. The 459 road miles from Yukon also affect mobilization, along with pits, excavator time and backfill.

Where the Newton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Newton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Newton, Texas

Type the address of your job in Newton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Newton

Same county: Deweyville. All counties: Texas county list.