Directional Boring Contractors in San Saba County, TX

Trinity Boring Solutions is a directional boring contractor serving San Saba County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in San Saba and Richland Springs. The Trinity main office in Yukon, Oklahoma is about 377 road miles from San Saba, the county seat. Most San Saba County bores go under US 190 and State Highway 16 and the Colorado River. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in San Saba County, Texas

Type the address of your job in San Saba County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in San Saba County?

San Saba County covers 1,135 square miles, has about 5,508 residents and sits in the TxDOT Brownwood District.

County seatSan Saba
Population5,508 (2024 Census estimate), down 3.8% since 2020
Land area1,135 square miles
Largest cities and townsSan Saba (2,866) and Richland Springs (246)
TxDOT districtTxDOT Brownwood District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesOncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative
Interstate and US highwaysUS 190
State Highways16
RiversColorado River and San Saba River
Creeks and other streamsCherokee Creek, Buffalo Creek, Wilbarger Creek, Richland Creek, Wallace Creek, Richland Springs Creek, Simpson Creek and West Deep Creek
Railroadsshort line railroads, about 35 main line miles
Average precipitation29.5 inches a year (1991 to 2020)
Road distance from Trinity main officeAbout 377 miles from Yukon, Oklahoma to San Saba
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in San Saba County?

A bore in San Saba County most often has to cross a highway such as US 190 or State Highway 16, a stream such as the Colorado River, the San Saba River or Cherokee Creek and short line track. State Highways 16 also run through the county. The Census map names 25 larger streams in San Saba County, led by the Colorado River, the San Saba River, Cherokee Creek, Buffalo Creek, Wilbarger Creek and Richland Creek. The rest are Wallace Creek, Richland Springs Creek, Simpson Creek, West Deep Creek, Jerrys Branch, Rough Creek, Marley Creek, Antelope Creek, East Deep Creek, Horse Creek, Cottonwood Creek, Dry Simpson Creek, Honey Creek, Dry Creek, China Creek, Lost Creek, Turkey Roost Creek, Barnett Springs Creek and Middle Deep Creek. The federal rail map shows about 35 miles of main line track in San Saba County, owned by short line operators.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in San Saba County?

Rock is the main thing to plan for in San Saba County: the federal soil survey records bedrock within five feet of the surface on about 70 percent of the county, most of it hard rock. In San Saba County the bore path is set around rock where that is possible, and rock tooling goes on the truck where it is not. May is the wettest month in San Saba County at 4.1 inches on average and January the driest at 1.6. San Saba County averages 29.5 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Roughcreek (26%), Rumple (12%) and Nocken (6%).
  • Surface texture: most often very stony clay loam (25%) or gravelly clay loam (13%).
  • Bedrock within 5 feet: about 70% of the county. Most of it is hard rock.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 81% of the county.
  • Gravelly, cobbly or stony surface soil: about 54% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, San Saba County, Texas (survey area TX411, version 23, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in San Saba County?

The TxDOT Brownwood District permits bores under state highways in San Saba County, the San Saba County Commissioners Court handles county roads, and San Saba and Richland Springs each handle their own streets.

  • State highways. US 190, the other numbered state routes and the farm to market roads in San Saba County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under short line track in San Saba County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the Colorado River, the San Saba River or Cherokee Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve San Saba County?

Oncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative serve San Saba County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company is an investor owned utility; Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative are member owned cooperatives. Conduit bored in San Saba County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.

Is San Saba County Growing?

The population of San Saba County went from 5,725 in 2020 to 5,508 in 2024, a loss of 3.8 percent. In San Saba County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.

Which Cities and Towns in San Saba County Does Trinity Serve?

Trinity takes directional boring work in all 2 incorporated places in San Saba County and at sites outside city limits, and San Saba is the largest with about 2,866 residents.

City or town2024 population
San Saba2,866
Richland Springs246

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside San Saba County.

San Saba County borders Brown County, Burnet County, Lampasas County, Llano County, McCulloch County, Mason County and Mills County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Brownwood (Brown), Burnet (Burnet), Lampasas (Lampasas), Llano (Llano), Brady (McCulloch), Mason (Mason) and Goldthwaite (Mills).

Which Directional Boring Services Are Available in San Saba County?

Every Trinity service is available in San Saba County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a San Saba County job before you call.

San Saba County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in San Saba, Texas?

Yes. Trinity Boring Solutions takes work in San Saba and Richland Springs and the rural parts of San Saba County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 190 in San Saba County?

The TxDOT Brownwood District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the San Saba County Commissioners Court and city streets through the city.

Is there rock in San Saba County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 70 percent of San Saba County, most of it hard rock. Potholing confirms it on the actual bore path.

Can a line be bored under the Colorado River in San Saba County?

Yes. A drill is steered below the bed of the Colorado River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in San Saba County?

Short line operators, with about 35 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in San Saba County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in San Saba County?

Our price starts from a general range for the length and the pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many San Saba County jobs.

How Do You Get a Bore Quote in San Saba County?

Call (405) 409-7423 any time or send the address in San Saba County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.