trinityboringsolutions.com

Dalhart Texas Directional Boring: Dallam Fine Sandy Loam, US 87 and Rita Blanca Creek

Quick Answer: 5th Street, Ponderosa Lane and Railroad Street mark long routes through Dalhart, while US 87 carries traffic across town. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines crossing US 87 and Dalhart streets. Dalhart is 340 road miles from our Yukon, Oklahoma main office, with BNSF Railway tracks adding another crossing condition. The USDA soil survey maps Dallam fine sandy loam at the surface and sandy clay loam below, where sticky cuttings can cling to a reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Dalhart bores at a glance

  • County seat of Dallam County and Hartley County, Texas. Population 8,443 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 340 miles, about 6.3 hours of driving.
  • Ground: Dallam soil is mapped on 71 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 87, US 385, US 54, US 87 Business and FM 281. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway and Union Pacific, with 7 mapped street and rail crossings.
  • Public water: Dalhart Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Dalhart near US 87?

5th Street, Ponderosa Lane and Railroad Street are among Dalhart’s longest named streets, within a city of 91.7 public road centerline miles. The Census Bureau Vintage 2024 estimate puts the population at 8,443. Along these routes, we install water, sewer, gas, electric conduit and fiber lines by directional boring, with the route and line type shaping the bore plan.

Our main office is in Yukon, Oklahoma, and Dalhart work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of boring have taught us to plan for ground like the Dallam fine sandy loam mapped under Dalhart. Our family business began in 1965, and we stay involved from the first call through the bore log.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Dalhart’s Dallam soil have?

The USDA soil survey maps Dallam soil across 71 percent of Dalhart’s area, with Dallam fine sandy loam, 0 to 1 percent slopes, mapped across 66 percent. Surface texture is fine sandy loam in 80 percent of the area and loam in 17 percent. At about 40 inches below the surface, sandy clay loam is mapped in 82 percent and clay loam in 16 percent. Average clay content at that depth is 31 percent. These are mapped patterns, not test borings, so a site check still matters.

USDA soil survey, inside the Dalhart city limitsWhat is mapped
Soil series mappedDallam 71 percent, Perico 11 percent, Berda 8 percent and Sunray 7 percent
Texture at the surfacefine sandy loam 80 percent and loam 17 percent
Texture about 40 inches downsandy clay loam 82 percent and clay loam 16 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet of Dalhart, though that does not rule out rock deeper down. The geologic map shows the Pleistocene Blackwater Draw Formation, with sand that can be locally clayey and as much as 25 feet thick. A seasonal water table within 40 inches is mapped in 1 percent of the area; flood prone soils and high steel corrosion risk are not mapped. The mapped clay can cling to tooling, so we watch returns and adjust the fluid plan.

How is a bore run through Dalhart’s sandy clay loam?

Dalhart’s sandy clay loam below the surface can hold a bore open, while clay may build on the reamer. We shape the fluid and reaming plan around the mapped Dallam soils and the actual path.

  1. At a Dallam soil site, we match drilling fluid to the clay so cuttings do not build up on the reamer or grip the pipe.
  2. Where sandy clay loam is mapped below the surface, we ream in stages and have the line ready before opening the final bore.
  3. Near US 87 pavement, we keep fluid pressure controlled and track the head from the surface, logging its depth and pitch.
  4. Along a route with marked utilities, such as near Dalhart Municipal Water System lines, we pothole each crossing before drilling close to it.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a Dalhart line go under Rita Blanca Creek?

US 87, US 385 and US 54 run through Dalhart, along with FM 281, FM 297 and FM 1727. A line crossing one of these roads needs a route planned around the roadway and its right of way. The city’s longest named streets include 5th Street at 1.92 miles, Ponderosa Lane at 1.65 miles and Railroad Street at 1.65 miles. A bore can pass below pavement and driveways without opening a trench across those surfaces.

CrossingTypeMapped extentWho has a say
US 87US highway3.2 roadway miles insideState highway office
US 385US highway2.8 roadway miles insideState highway office
US 54US highway2.5 roadway miles insideState highway office
US 87 BusinessUS highway0.4 roadway miles insideState highway office
FM 281State highway2.7 roadway miles insideState highway office
FM 297State highway1 roadway miles insideState highway office
FM 1727State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad3.96 track miles insideThe railroad
Union PacificRailroad3.46 track miles insideThe railroad
Rita Blanca CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Rita Blanca LakeLake or pond300 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 3.96 track miles inside Dalhart, and Union Pacific has 3.46; seven mapped street and rail crossings make track location a practical part of route planning. Rita Blanca Creek lies 0.1 miles outside the city limits, while Rita Blanca Lake is inside them. No named stream street crossings are mapped inside Dalhart, and no unnamed drainage miles are mapped. A planned water crossing still needs its jurisdiction checked during planning.

Do I need a permit to cross BNSF Railway in Dalhart?

US 87 and the other US, state and farm to market roads in Dalhart are under TxDOT oversight when work occupies highway right of way. The TxDOT Amarillo District reviews the utility permit. The utility that owns the line submits the application through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. A crossing of BNSF Railway or Union Pacific needs an agreement with the railroad that owns the track. For Rita Blanca Creek or Rita Blanca Lake, we check for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Dallam County near Dalhart?

Dalhart Municipal Water System uses groundwater wells and serves 8,256 people through 4,238 service connections. For an electric conduit bore near 5th Street or US 87, the county utilities reporting electric service are Southwestern Public Service, Rita Blanca Electric Cooperative, Southwestern Electric Cooperative and Tri-County Electric Cooperative. We confirm which utility owns the line at the specific location before planning conduit.

Line ownerWhat it isSourceSize
Dalhart Municipal Water SystemPublic water systemGroundwater wells4,238 connections, 8,256 people served
Southwestern Public Service, Rita Blanca Electric Cooperative, Southwestern Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Dallam County and Hartley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Dalhart’s median housing year at 1977; 25 percent of housing was built before 1960, and 15 percent in 2000 or later. That mix can mean replacement work near older streets as well as new service runs. Before a bore near Ponderosa Lane crosses a marked line, we use hydrovac potholing to expose it; surface marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Dalhart in relation to Hartley?

Dalhart sits in Dallam and Hartley Counties and is the county seat of Dallam County. The incorporated city covers 4.78 square miles at an elevation of 3,981 feet, and its ZIP code is 79022. Hartley is 12.8 miles southeast; Channing is 27.8 miles south, and Cactus is 28.2 miles east. Dalhart is 340 road miles and a 6.3 hour drive from our Yukon, Oklahoma main office, a distance that affects mobilization for work on local roads.

Places near Dalhart

Which jobs call for a bore along Dalhart’s 5th Street?

  • Highway crossing: A bore beneath US 87 keeps the line below the roadway rather than cutting across its pavement.
  • Water service: A connection near Dalhart Municipal Water System routes needs its existing groundwater lines located and exposed before drilling.
  • Rail crossing: A route beneath BNSF Railway needs the track owner’s agreement and a plan for its crossing conditions.
  • Creek approach: A line near Rita Blanca Creek needs its channel route considered and jurisdiction checked during planning.
  • Street utility: A run along 5th Street can place water, sewer or conduit beneath pavement and driveways without an open cut.
  • Lake crossing: Work near Rita Blanca Lake calls for a route review that accounts for a named water feature inside the city.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Dalhart’s 13th Street?

For a Dalhart quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near 13th Street is easier to scope when the plan shows nearby roads, utilities and any crossing points.

The biggest cost driver is often the ground and reaming needed for Dalhart’s mapped sandy clay loam and clay, because that controls the bore plan and time. Length and pipe or conduit size matter too. Crossings of US 87 or BNSF Railway can add coordination, while utilities to expose, pavement, pits, excavator time and sand backfill also affect the scope. Mobilization is shaped by the 340 road miles from Yukon; emergency or high profile work changes the requirements.

Questions people ask about boring in Dalhart

Does Trinity take directional boring jobs in Dallam County near Dalhart?

Yes. We take directional boring work in Dalhart and staff it with our own crews or from satellite yards run by drilling contractor partners we have vetted. You work with Trinity from the first call through the bore log, even when a partner crew is on site. We plan around local routes such as US 87.

Who owns electric lines in Dallam County near Dalhart, and who confirms conduit specs?

Electric service in Dallam County is reported by Southwestern Public Service, Rita Blanca Electric Cooperative, Southwestern Electric Cooperative and Tri-County Electric Cooperative. The specific line owner depends on the location, including along 5th Street. We confirm ownership before a conduit bore, and the owner can confirm its conduit requirements.

Who controls Railroad Street in Dalhart, and does a bore mean cutting it?

Railroad Street is a city street because Dalhart is incorporated. A directional bore can pass beneath its pavement and driveways without an open cut through the surface. The city street location and any nearby mapped rail crossing still need to be included in the route plan.

Do older homes along Ponderosa Lane in Dalhart need replacement bores?

They may. The American Community Survey 2019 to 2023 estimates put Dalhart’s median housing year at 1977, with 25 percent built before 1960. A replacement bore can avoid opening a long section of Ponderosa Lane, but marked lines along the route need to be exposed before drilling near them.

What ground does a bore pass through in Dalhart’s Dallam soil?

The USDA soil survey maps Dallam soil across 71 percent of Dalhart. At about 40 inches deep, sandy clay loam is mapped in 82 percent of the area, with an average clay content of 31 percent. Clay can cling to tooling, so the fluid and reaming approach should suit the site.

Will a directional bore in Dalhart hit rock?

Bedrock is not mapped in Dalhart’s top five feet, which does not rule out rock deeper down. The geologic map shows the Pleistocene Blackwater Draw Formation, described as sand that can be locally clayey. A site’s actual conditions still guide the drilling equipment and plan.

How soon should I call Texas811 for a bore along 5th Street in Dalhart?

The locate request for a bore along 5th Street must be made at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

How far is Dalhart from Trinity’s Yukon office, and does it affect the job?

Dalhart is 340 road miles, or a 6.3 hour drive, from our Yukon, Oklahoma main office. That distance can affect mobilization and the job scope, especially when the route includes a US 87 crossing or needs additional equipment and site work.

What affects the cost of directional boring under US 87 in Dalhart?

The job scope sets the price, with no fixed amount based on the highway alone. Length, pipe or conduit size, Dalhart’s clayey mapped ground, and the utilities or pavement at a US 87 crossing all matter. Creek or drainage work, pits, equipment time and mobilization from Yukon can also change the scope.

Where the Dalhart facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Dalhart

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Dalhart, Texas

Type the address of your job in Dalhart. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Dalhart

County: Hartley County directional boring. Same county: Texline. All counties: Texas county list.