trinityboringsolutions.com

Claude Texas Directional Boring: Pullman Silty Clay Loam, US 287 and BNSF Railway

Quick Answer: Pullman silty clay loam holds an open bore, but sticky clay can build on the reamer. Along US 287, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Claude, Texas. Claude is 235 road miles from our Yukon, Oklahoma main office, and BNSF Railway adds a track crossing to local planning. At 40 inches, clay loam is mapped across 99 percent of Claude, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Claude bores at a glance

  • County seat of Armstrong County, Texas. Population 1,175 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 235 miles, about 4.4 hours of driving.
  • Ground: Pullman soil is mapped on 99 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 287, FM 1151 and Texas State Highway 207. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
  • Public water: Claude Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Claude and Armstrong County?

Pullman silty clay loam is the main ground in Claude, and Trinity Boring Solutions takes directional boring work here in Armstrong County. The Census Bureau Vintage 2024 estimate puts the city population at 1,175. We install water, sewer, gas, electric conduit and fiber beneath routes such as 1st Street, Second Street and US 287, with each alignment planned for its specific service.

Our main office is in Yukon, Oklahoma, and Claude work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that began in 1965 and has drilled directionally since 1982. That experience matters in Claude, where Pullman clay loam can cling to a reamer and needs a measured drilling approach.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pullman soil like to bore in Claude?

The USDA soil survey maps Pullman soil across 99 percent of Claude. Pullman silty clay loam covers 93 percent of the mapped area, with the remaining 7 percent in the same texture on 1 to 3 percent slopes. At about 40 inches below the surface, clay loam is mapped across 99 percent, and the average clay content there is 39 percent. The survey classifies the mapped area as heavy clay at that depth. These are mapped soil patterns, so the exact route still needs field checks.

USDA soil survey, inside the Claude city limitsWhat is mapped
Soil series mappedPullman 99 percent
Texture at the surfacesilty clay loam 99 percent
Texture about 40 inches downclay loam 99 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

For a bore near 1st Street, the soil map shows no bedrock in the upper five feet; deeper conditions still need field confirmation. The Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material, is also mapped in Claude. A seasonal water table within 40 inches is mapped in 1 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped throughout the area, so the line owner should address steel casing and tracer wire materials.

How do crews bore Claude’s clay loam?

Pullman silty clay loam is sticky, and the mapped clay loam at depth can grip the pipe. On routes near US 287 or 1st Street, we control fluid and open the hole in stages.

  1. Pullman silty clay loam can cling to the reamer, so we use thinner drilling fluid with polymer and open the hole through staged passes.
  2. Because Claude’s mapped clay is heavy at about 40 inches, we watch fluid returns near paved routes such as US 287 to limit pressure beneath pavement.
  3. Where a route near 1st Street has marked utilities, hydrovac potholing exposes them before the drill approaches; paint alone does not show depth.
  4. We track the drill head from the surface and record depth and pitch along a Second Street bore, then pull pipe the same day the hole is opened.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What does a bore have to cross in Claude near 1st Street?

US 287 runs through Claude, along with FM 1151 and Texas State Highway 207, so a project may involve state highway right of way as well as city streets. Among the longer named streets, 1st Street runs 1.74 miles in the city, Second Street runs 1.39 miles and Orient Street runs 1.34 miles. A bore can pass beneath pavement rather than cut across it, but the route, utility depth and access points determine the plan.

CrossingTypeMapped extentWho has a say
US 287US highway2.6 roadway miles insideState highway office
FM 1151State highway2.4 roadway miles insideState highway office
Texas State Highway 207State highway0.5 roadway miles insideState highway office
BNSF RailwayRailroad2.21 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway owns 2.21 track miles inside Claude, and public mapping shows four street and rail crossings in the city. A crossing route needs to account for the track owner’s agreement and its project conditions. No named streams, lakes or ponds are mapped within the stated areas, so there is no mapped creek crossing to plan around here. If a project changes to include a water crossing, its route would need separate review.

Who approves Claude bores near BNSF Railway?

US 287, FM 1151 and Texas State Highway 207 are state routes in Claude. Work in their right of way needs a TxDOT utility permit, reviewed by the TxDOT Amarillo District; the utility owner files through RULIS, while we prepare the bore plan and profile for work under that permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with required cover and casing set by the line and crossing. Claude is incorporated, so streets such as 1st Street belong to the city. A route beneath BNSF Railway needs an agreement from BNSF. No named stream crossing is mapped in the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near Claude Municipal Water System routes?

Claude Municipal Water System serves 1,300 people through 700 service connections and draws water from groundwater wells. Before a bore near a water route, we use hydrovac potholing to expose marked lines and confirm depth. County utility reports to the EIA name Southwestern Public Service and Greenbelt Electric Cooperative. Those reports do not establish which company owns a line at a particular address, so the conduit route near US 287 needs its line owner identified before planning.

Line ownerWhat it isSourceSize
Claude Municipal Water SystemPublic water systemGroundwater wells700 connections, 1,300 people served
Southwestern Public Service and Greenbelt Electric CooperativeElectric utilities reporting service in Armstrong CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Claude’s median housing year at 1964. The estimates show 43 percent of homes built before 1960, 51 percent from 1960 to 1999 and 6 percent in 2000 or later. That mix can mean replacement work as well as new services along streets such as Orient Street. Before drilling near an older service, we expose marked utilities with hydrovac because locate paint gives position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Claude from Amarillo to Armstrong County?

Claude is the incorporated county seat of Armstrong County, at an elevation of 3,404 feet, and covers 1.72 square miles. The city’s ZIP code is 79019. Washburn is 12.5 miles west, Groom is 16.1 miles northeast and Panhandle is 16.5 miles north. Amarillo, the nearest larger city, is 27.3 miles west. Our Yukon, Oklahoma main office is 235 road miles away, a 4.4 hour drive. That distance is part of planning equipment and crew mobilization for work along US 287 or local streets.

Places near Claude

What boring work comes up around Claude’s Second Street?

  • Highway crossing: A conduit route beneath US 287 can avoid cutting pavement, with its alignment and cover addressed through the TxDOT permit.
  • Water service: A service route near Claude Municipal Water System lines may need potholing before a new bore connects to the groundwater supply network.
  • Fiber route: A bore near Second Street can carry fiber beneath the roadway while leaving the street surface uncut.
  • Rail crossing: A proposed bore beneath BNSF Railway’s track needs the railroad’s agreement and its conditions for casing, depth and flagging.
  • Street crossing: A route across Orient Street can pass below the pavement, with marked utilities exposed before the drill reaches them.
  • Electric conduit: Along FM 1151, the line owner and conduit requirements need confirmation before the bore route is set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Claude bore near US 287?

For a Claude quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. Pullman silty clay loam is the local planning detail most likely to shape the drilling approach, since sticky clay can build on the reamer and affect the sequence of passes.

A short bore in Pullman soil with a clear route is simpler to plan than one that must cross US 287 or BNSF Railway. The job scope sets the price: length, pipe or conduit size, soil conditions, exposed utilities, pavement, crossing requirements, pits and excavator time all matter. The 235 road miles from Yukon also affect mobilization. A route near 1st Street may call for potholing and careful coordination where marked services and pavement meet.

Questions people ask about boring in Claude

Does Trinity Boring Solutions take directional boring work in Armstrong County near Claude?

Yes. Trinity takes directional boring projects in Claude, Armstrong County, and crews work under Trinity’s coordination whether they come from the Yukon office or a vetted partner’s satellite yard. The Census Bureau Vintage 2024 estimate puts Claude at 1,175 residents, and routes such as US 287 can shape access and bore planning.

Who approves a bore under US 287 in Claude?

TxDOT reviews work in the US 287 right of way through the TxDOT Amarillo District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for the work. TxDOT rules call for boring or tunneling beneath existing highway pavement, so a US 287 crossing is planned around that installation method.

What does a Claude bore under BNSF Railway need?

A bore beneath BNSF Railway needs an agreement from BNSF, which owns 2.21 track miles inside Claude. The railroad sets the crossing conditions, including casing, depth and flagging. Public mapping shows four street and rail crossings in the city, so the exact crossing location needs to be established before a route is designed.

Who runs Claude’s public water system, and where does its water come from?

Claude Municipal Water System is owned by the local government and uses groundwater wells. It serves 1,300 people through 700 service connections. Before drilling near its lines, we pothole marked utilities to confirm their location and depth, which matters on a street route such as 1st Street.

Which electric utility owns a line in Armstrong County near Claude?

County reports to the EIA name Southwestern Public Service and Greenbelt Electric Cooperative, but they do not identify the owner at every Claude address. We confirm the specific line owner before planning an electric conduit bore. That check matters on routes such as FM 1151, where the conduit design must match the owner’s requirements.

Who is responsible for Orient Street in Claude, and does it need to be cut?

Claude is incorporated, so Orient Street is a city street. A directional bore can pass beneath the pavement instead of cutting it, subject to the route and any required approvals. The street is 1.34 miles long inside the city, and marked utilities along the crossing need to be exposed before drilling near them.

How far is Claude from Amarillo and Trinity’s Yukon office?

Claude is 27.3 miles east of Amarillo and 235 road miles from Trinity’s main office in Yukon, Oklahoma, a 4.4 hour drive. That distance affects equipment and crew mobilization for a project near US 287 or elsewhere in Armstrong County. We assess the route and job scope before planning the work.

How much notice does Texas811 need for a bore near 1st Street in Claude?

Request a Texas811 locate at least 48 hours, or two working days, before excavation, and no earlier than 14 days before the start. If work near 1st Street slips more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 287 in Claude?

The job details set the price, not US 287 alone. Length, pipe or conduit size, Pullman soil, utility crossings, pavement, pits and excavator time all affect the scope. A highway permit and the 235 road miles from Yukon can also change planning and mobilization. A map pin and project sketch help define the route.

Where the Claude facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Claude

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Claude, Texas

Type the address of your job in Claude. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Claude

All counties: Texas county list.