trinityboringsolutions.com

Groom Texas Directional Boring: Pullman Clay Loam, Interstate 40 and Playa Clay

Quick Answer: 3rd Street, 1st Street and 2nd Street are Groom’s longest named streets, and Interstate 40 crosses town. Trinity handles directional boring, also called horizontal directional drilling (HDD), for lines routed beneath Interstate 40. From our Yukon, Oklahoma main office, Groom is 213 road miles away, while Pullman soil shapes the bore plan. Clay can cling to tooling, so crews ream in stages through Pullman ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Groom bores at a glance

  • Incorporated city in Carson County, Texas. Population 537 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 213 miles, about 4 hours of driving.
  • Ground: Pullman soil is mapped on 50 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 40, Texas State Highway 66, FM 2300 and FM 295. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Groom Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along Interstate 40 in Groom?

Groom is an incorporated town in Carson County with 537 residents in the Census Bureau Vintage 2024 estimate. We take water, sewer, gas, electric conduit and fiber work, including service lines routed beneath 2nd Street or across Interstate 40. The route and line type help us plan the bore and identify what must be exposed before drilling.

Our main office is in Yukon, Oklahoma, and Groom work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, with directional boring work dating to 1982. Our longest bore ran roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa; a service bore near 2nd Street is a smaller local scope.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pullman soil like to bore in Groom?

The USDA soil survey maps Pullman soil across 50 percent of Groom, mostly as Pullman clay loam on 1 to 3 percent slopes. Lofton clay loam accounts for 20 percent, and Pantex silty clay loam covers 17 percent. At about 40 inches below the surface, clay loam is mapped across 55 percent and clay across 29 percent. The survey shows soil patterns, not conditions from a test boring, so the route still needs field checks.

USDA soil survey, inside the Groom city limitsWhat is mapped
Soil series mappedPullman 50 percent, Lofton 20 percent, Pantex 17 percent, Randall 9 percent and Estacado 5 percent
Texture at the surfaceclay loam 75 percent, silty clay loam 17 percent and clay 9 percent
Texture about 40 inches downclay loam 55 percent, clay 29 percent and silty clay loam 17 percent
Engineering class about 40 inches downlean clay (CL) 55 percent and fat clay (CH) 45 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches29 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

At about 40 inches, Groom’s mapped ground is heavy clay throughout, with 42 percent average clay content. That sticky material can build on a reamer and grip pipe, so the crew must manage returns and pull the pipe soon after opening the hole. The USDA soil survey does not map bedrock within 60 inches, while a seasonal water table is mapped within 40 inches across 29 percent. For boring in Groom, we account for Pullman, Lofton, Pantex, and Randall soils; no flood prone soils are mapped. High steel corrosion risk covers the mapped area. Playa Clay is Quaternary, and Cenozoic sedimentary rocks are Paleocene; deeper conditions may differ.

How do crews handle Groom’s clay loam?

Pullman clay loam covers half of Groom, and the mapped ground at about 40 inches is heavy clay. We plan the fluid, reaming sequence and pipe pull around those local conditions.

  1. On a Pullman clay loam route, we use a fluid plan suited to sticky clay so material does not build up on the reamer.
  2. Because heavy clay is mapped at about 40 inches across Groom, we watch returns and ream in stages to limit pressure beneath pavement.
  3. A seasonal water table is mapped within 40 inches across 29 percent of town, so we keep pits small and pump them if water collects.
  4. At 2nd Street, we locate and hydrovac expose marked utilities before the drill approaches; the walkover locator tracks depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line across Interstate 40 in Groom?

Interstate 40 and Texas State Highway 66 run through Groom, along with FM 2300 and FM 295. A bore under a state route needs a profile that accounts for the road grade and the required cover. Inside town, 3rd Street is the longest named street at 1.32 miles, followed by 1st Street and 2nd Street, each at 1.3 miles. Front Street runs 1.01 miles. Those streets give a route designer several established corridors to consider before placing entry and exit pits.

CrossingTypeMapped extentWho has a say
Interstate 40Interstate1.1 roadway miles insideState highway office
Texas State Highway 66State highway1 roadway miles insideState highway office
FM 2300State highway0.7 roadway miles insideState highway office
FM 295State highway0.5 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Groom or within one mile outside its limits, so no track crossing is shown in the local records. No named streams are mapped in town or nearby, though the map shows 1.12 miles of unnamed drainage inside the limits. There are no mapped street crossings of named streams and no lakes or ponds within one mile. A route near that drainage still needs a site check so the bore avoids a low point or wet ground.

Who approves a bore on Groom roads in Carson County?

Groom is incorporated, so its city streets belong to the city; Interstate 40, Texas State Highway 66, FM 2300 and FM 295 fall under state highway permitting when work occupies their right of way. For electric and communication crossings, TxDOT requires at least 60 inches of cover below the lowest crossed grade, and 48 inches along the right of way. Water crossings need 60 inches and water lines along the right of way need 36 inches. Pressurized sewer crossings need 60 inches. The utility owner submits the application through RULIS, where the TxDOT Amarillo District reviews it; we prepare the bore plan and profile for the utility’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Groom Municipal Water System?

Groom Municipal Water System serves 548 people through 310 service connections and draws from groundwater wells. That makes its water lines a key locate and potholing concern before a new service bore near the system. Southwestern Public Service reports electric service in Carson County, but the line owner needs confirmation for the specific route before an electric conduit bore. We expose marked lines with hydrovac potholing before drilling near them, including water and electric facilities along a planned route.

Line ownerWhat it isSourceSize
Groom Municipal Water SystemPublic water systemGroundwater wells310 connections, 548 people served
Southwestern Public ServiceElectric utilities reporting service in Carson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Groom’s median housing year at 1964; 34 percent of homes were built before 1960, while 2 percent date from 2000 or later. Replacement work near 1st Street may need to pass older buried services, while new construction calls for a different connection route. We pothole each marked utility on the bore path because surface paint shows its position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Groom in relation to White Deer and Yukon?

Groom is in Carson County at an elevation of 3,252 feet and covers 0.74 square miles, with ZIP code 79039. White Deer lies 16.1 miles north, and Claude is 16.1 miles southwest. Panhandle, the county seat, is 18.2 miles northwest; Pampa is the nearest larger city, 24.8 miles north. Our Yukon, Oklahoma main office is 213 road miles away, about a 4.0 hour drive. That distance can affect mobilization for a bore on 3rd Street or an Interstate 40 crossing.

Places near Groom

Which jobs call for a bore near 2nd Street in Groom?

  • Highway crossing: A line beneath Interstate 40 needs a bore profile that accounts for highway cover and keeps the pavement intact.
  • Water service: A connection near Groom Municipal Water System needs the existing groundwater lines located before the crew drills.
  • Fiber route: A fiber conduit along 2nd Street can pass beneath driveways without cutting the street surface.
  • Drainage crossing: A route near the 1.12 miles of unnamed drainage needs a site check for wet ground and a suitable bore path.
  • Street replacement: A replacement line near 1st Street can use a bore to avoid opening the established road surface.
  • Electric conduit: Before routing conduit near 3rd Street, we identify the electric line owner and expose marked utilities along the path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near 3rd Street in Groom?

A map pin matters near 3rd Street because the exact approach to a driveway or crossing sets where pits can fit. For an Interstate 40 crossing in Groom, send us the address or pin, what will go in the ground, pipe or conduit size, and footage. A sketch or plans help us check the route and the nearby Interstate 40 or drainage features.

Pullman clay loam is the first cost consideration because sticky heavy clay affects fluid control, reaming and pipe pull. The price also reflects line size and bore length, marked utilities to expose, and pavement near 3rd Street or Interstate 40. Drainage crossings, pits, excavator time and sand backfill can change the work. A 213 road mile trip from Yukon also affects mobilization, as can high profile or emergency timing.

Questions people ask about boring in Groom

Does Trinity take directional boring work in Groom and Carson County?

Yes. We take directional boring work in Groom, and the job is handled by our crews or by crews from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the route is near 2nd Street or Interstate 40.

Who controls 2nd Street in Groom, and can a bore avoid cutting it?

Groom is incorporated, so we treat 3rd Street and Front Street as city streets when planning boring work. A directional bore can pass beneath 2nd Street without opening the pavement, subject to the route and site conditions. We locate and expose marked utilities first, then place the pits off the paved travel area where the site allows.

Does the age of homes near 1st Street affect replacement bores in Groom?

It can affect planning, since the American Community Survey 2019 to 2023 five year estimates give Groom a median housing year of 1964. Older service lines may be part of a replacement route near 1st Street. We use current utility marks and potholes to verify depth before drilling near existing lines.

Can groundwater in Pullman soil fill bore pits in Groom?

It can. The USDA soil survey maps a seasonal water table within 40 inches across 29 percent of Groom, including areas with Pullman soil. Small pits and pumping may be needed if water enters the work area. No flood prone soils are mapped, but the unnamed drainage still deserves a site check.

Does Pullman soil in Groom corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across Groom, including Pullman soil areas. That matters for steel casing and tracer wire, so the line owner chooses any needed coating. HDPE avoids the soil corrosion concern. The right pipe depends on the line, route and project requirements near roads such as 3rd Street.

What ground is mapped below Pullman soil in Groom?

Pullman is the leading mapped soil series in Groom at 50 percent. At about 40 inches below the surface, the USDA soil survey maps clay loam across 55 percent and clay across 29 percent. These are mapped patterns rather than test results at a particular bore site, so field conditions along 1st Street may vary.

What bore sizes and lengths can Trinity handle near Front Street in Groom?

We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed route near Front Street still needs review for soil, utilities and pit space. Send the line size and footage so we can assess the specific scope.

How much notice does Texas811 need for a bore near 3rd Street in Groom?

For a bore along 3rd Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, make a new request. For boring planned near FM 2300 in Groom, we have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of boring under Interstate 40 in Groom?

The price depends on the route and work scope, not just distance. Pullman clay loam can affect drilling and reaming; Interstate 40 adds highway crossing and permit planning. Line size, length, utilities to expose, pavement, drainage, pits, backfill and excavator time also matter. Mobilization from Yukon is another factor for Groom.

Where the Groom facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Groom

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Groom, Texas

Type the address of your job in Groom. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Groom

Same county: Skellytown. All counties: Texas county list.