Rockport Texas Directional Boring: Galveston Soil, Fine Sand, Highway 35
Quick Answer: Along Texas State Highway 35, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes. Rockport is 590 road miles from our Yukon, Oklahoma main office, and we staff work with our own crews and vetted drilling partners near Fulton. The USDA soil survey maps fine sand across 69 percent of Rockport, so the bore hole can cave behind the drill head. On Broadway Street, staged reaming and having the pipe ready help crews manage that loose ground.
Rockport bores at a glance
- County seat of Aransas County, Texas. Population 11,069 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 590 miles, about 11.4 hours of driving.
- Ground: Galveston soil is mapped on 48 percent of the area, with fine sand about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 35, FM 1781, Loop 70, FM 2165 and FM 3036. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Rockport, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Texas State Highway 35 in Rockport?
In Rockport, Aransas County, the Census Bureau Vintage 2024 estimate puts the population at 11,069. We install water and sewer lines for service routes near City of Rockport connections, along with gas, electric conduit and fiber for routes by Texas State Highway 35 or Live Oak Street. The crossing and access at each address shape the bore plan.
Our main office is in Yukon, Oklahoma, and Rockport work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our no strike record is over 25 years, a point that matters around City of Rockport water connections and electric service reported in Aransas County. The family business started in 1965 and has done directional boring since 1982.

What is the ground like to bore in Rockport’s Galveston soil?
The USDA soil survey maps Galveston soil across 48 percent of Rockport, and Mustang soil across another 17 percent. Fine sand covers 69 percent of the mapped surface; at about 40 inches, fine sand is mapped across 66 percent and the SM soil group across 69 percent. Average clay at that depth is 5 percent. These are mapped soil patterns, not test borings. Along Live Oak Street, loose sand can cut quickly but may cave behind the drill head, so the drilling fluid has to help hold the bore open.
| USDA soil survey, inside the Rockport city limits | What is mapped |
|---|---|
| Soil series mapped | Galveston 48 percent, Mustang 17 percent, Dianola 3 percent and Dietrich 3 percent |
| Texture at the surface | fine sand 69 percent, clay 4 percent and loamy fine sand 4 percent |
| Texture about 40 inches down | fine sand 66 percent, loamy fine sand 3 percent and clay 3 percent |
| Engineering class about 40 inches down | silty sand (SM) 69 percent, fat clay (CH) 5 percent and lean clay (CL) 4 percent |
| Average clay content about 40 inches down | 5 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 78 percent of the area |
| Flood prone soils | 69 percent of the area |
| High corrosion risk for uncoated steel | 13 percent of the area |
Bedrock is not mapped in the top five feet of Rockport, but that does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 78 percent of the area, and flood prone soils cover 69 percent, so pits may need pumping and wet sand needs care. High steel corrosion risk is mapped across 13 percent. The Pleistocene barrier island deposits are mostly fine grained sand and less than 60 feet thick, a local ground condition that favors staged reaming over leaving an open hole.
How do crews handle fine sand in Rockport?
Fine sand is mapped across much of Rockport, including around Broadway Street. We use the drilling fluid to support the hole, keep the pipe ready, and check the route before the drill approaches marked utilities.
- In Rockport’s fine sand, we use drilling fluid to form support around the hole, then ream in stages so loose ground is less likely to cave.
- With a seasonal water table mapped within 60 inches across much of Rockport, crews keep pits manageable and pump water when conditions call for it.
- Before drilling near marked City of Rockport water lines or Aransas County electric lines, we pothole to expose each utility and establish its depth.
- At a Broadway Street bore, we track the drill head from the surface and log depth and pitch so the route stays controlled through Rockport’s sand.

Where does a line have to go under Texas State Highway 35 in Rockport?
Texas State Highway 35 runs through Rockport, alongside FM 1781, Loop 70, FM 2165 and other state routes. Broadway Street is the longest named street in the city at 2.74 miles, followed by Live Oak Street at 2.72 miles and Bronte Street at 2.28 miles. A bore on any of these streets can avoid cutting the pavement when the route and pits fit the site. Interstate 35 is 0.5 miles outside the city limits, so a job near that boundary may also involve a state highway crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 35 | State highway | 23.2 roadway miles inside | State highway office |
| FM 1781 | State highway | 3.7 roadway miles inside | State highway office |
| Loop 70 | State highway | 3 roadway miles inside | State highway office |
| FM 2165 | State highway | 2.7 roadway miles inside | State highway office |
| FM 3036 | State highway | 2.4 roadway miles inside | State highway office |
| Texas State Highway 35 Business | State highway | 2.1 roadway miles inside | State highway office |
| FM 1069 | State highway | 1.8 roadway miles inside | State highway office |
| Texas State Highway 188 | State highway | 0.7 roadway miles inside | State highway office |
| Interstate 35 | Highway nearby | 0.5 miles outside | State highway office |
| Canoe Lake | Lake or pond | 11 acres, inside | Checked for Corps of Engineers jurisdiction |
| Turkey Neck | Lake or pond | 5 acres, inside | Checked for Corps of Engineers jurisdiction |
| Pompano Lagoon | Lake or pond | 2 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Rockport or within 1 mile of its limits, so a mapped rail crossing is not part of the local route picture. No named stream is mapped in or within 1 mile of the city, and none is mapped crossing a street. The city has 0.13 miles of unnamed drainage, which may need a site check. Canoe Lake, Turkey Neck, Pompano Lagoon and Claude South Cove are mapped water features; a lake crossing calls for a jurisdiction check during planning.
Do I need a permit to bore in Rockport or Aransas County?
At a Texas State Highway 35 crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches. Along the right of way, the cover is 48 inches for electric and communication and 36 inches for water; pressurized sewer crossings need 60 inches. TxDOT Corpus Christi District reviews the utility permit, which the line owner files through RULIS. We prepare the bore plan and profile and work under the permit issued to that utility. TxDOT rules call for boring or tunneling under an existing highway and casing at crossings. Rockport is incorporated, so its city streets, such as Bronte Street, are under city authority. A crossing at Canoe Lake is checked during planning for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are in the ground near the City of Rockport?
The City of Rockport public water system serves 11,186 people through 13,386 service connections, using purchased surface water. For a bore near Live Oak Street, that system is one line owner to check before planning a connection. AEP Texas Central and San Patricio Electric Cooperative report electric service in Aransas County. The electric line owner must be confirmed for the specific address before conduit plans are set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Rockport | Public water system | Surface water bought from another system | 13,386 connections, 11,186 people served |
| AEP Texas Central and San Patricio Electric Cooperative | Electric utilities reporting service in Aransas County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Rockport’s median housing year at 1989; 6 percent of homes were built before 1960, and 37 percent in 2000 or later. A replacement bore along Broadway Street may follow older buried service, while a new connection may need a different route. We pothole marked utilities before drilling near them, since paint shows position but not depth; that check matters around City of Rockport water lines and county electric lines.

Where is Rockport in relation to Corpus Christi?
Rockport is the Aransas County seat, with an elevation of 14 feet and a land area of 16.55 square miles. ZIP code 78382 covers the city. Fulton is 1.8 miles north, Lamar is 7.4 miles northeast, Holiday Beach is 8.6 miles north, Aransas Pass is 9.7 miles south and Bayside is 10.4 miles west. Corpus Christi, the nearest larger city, is 21.6 miles south. The Yukon yard is 590 road miles away, a drive of 11.4 hours, so distance is part of planning mobilization for a Rockport job.
Places near Rockport
- Directional boring in Fulton: 1.8 miles north
- Directional boring in Lamar: 7.4 miles northeast
- Directional boring in Holiday Beach: 8.6 miles north
- Directional boring in Aransas Pass: 9.7 miles south
- Directional boring in Bayside: 10.4 miles west
- Corpus Christi: 21.6 miles south
What kinds of bores come up near Live Oak Street in Rockport?
- Highway crossing: A Texas State Highway 35 bore needs a route and cover plan that fits the highway right of way and the utility permit.
- Water service: A connection near Live Oak Street may tie into the City of Rockport system, so the water line owner and existing utilities need checking.
- Fiber route: A fiber bore along Broadway Street can pass beneath pavement, with pits placed where the street access allows.
- Drainage crossing: Near Rockport’s 0.13 miles of unnamed drainage, the route and bore depth need a site check before work.
- Lake crossing: A bore near Canoe Lake needs planning for the water feature and a check of U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Near Bronte Street, confirm the electric line owner in Aransas County before setting conduit size and route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Broadway Street in Rockport?
For a bore near Broadway Street, send the address or map pin first. Tell us what goes in the ground, such as a water line for a City of Rockport connection, then give the pipe or conduit size and the footage. A sketch or plans help show a Texas State Highway 35 crossing, nearby utilities and pit access.
The first price driver is the bore length and pipe size, because both set the scale of the work near Broadway Street. Rockport’s fine sand and seasonal water table can affect drilling fluid, reaming and pit work. A Texas State Highway 35 crossing adds permit and cover requirements, while nearby utilities can mean more potholing. Pavement, drainage crossings, backfill and excavator time also change the scope. Mobilization matters because Rockport is 590 road miles from Yukon.
Questions people ask about boring in Rockport
Does Trinity take directional boring work in Rockport and Aransas County?
Yes. We take directional boring work in Rockport, and the job is handled by our own crews or a satellite yard run by a drilling contractor we have vetted. You work with Trinity from the first call through the bore log, including a job near Broadway Street.
Who approves a bore under Texas State Highway 35 in Rockport?
TxDOT reviews the utility permit for a Texas State Highway 35 crossing through its Corpus Christi District. The utility that owns the line submits the application in RULIS, while we prepare the bore plan and profile. The cover depth and crossing details shape the route under the highway.
Who runs Rockport’s public water system, and where does its water come from?
The City of Rockport owns and runs the public water system, which uses purchased surface water. It serves 11,186 people through 13,386 service connections. For a water bore near Live Oak Street, the system’s line and the existing utilities along the route need to be located.
Which electric provider serves Rockport in Aransas County, and who confirms conduit specs?
AEP Texas Central and San Patricio Electric Cooperative report electric service in Aransas County, but the provider at a particular address needs confirmation. The line owner confirms conduit specifications before a bore near Bronte Street is planned, because the local report does not identify the owner at every location.
Who is in charge of Bronte Street in Rockport, and does it have to be cut?
Rockport is incorporated, so its city streets, including Bronte Street, are under city authority. A directional bore can install a line beneath pavement without cutting through it when the route and pits work at the site. We check utilities and access before setting the bore path.
How old are Rockport homes and buried lines near Live Oak Street?
The American Community Survey 2019 to 2023 five year estimates give Rockport a median housing year of 1989. That does not date each buried line, but a replacement bore near Live Oak Street may need to connect with older service. We expose marked utilities before drilling close to them.
What bore sizes and lengths can Trinity handle for a Rockport job near Market Street?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a job near Market Street, the pipe size, footage, soil and crossings determine the drilling setup and quote.
How much Texas811 notice do I need for a Rockport bore near Broadway Street?
Texas law requires a locate request at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Broadway Street start slips more than 14 days past the original notice, submit a new one. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Rockport under Texas State Highway 35?
Length and pipe size are major factors, along with Rockport’s fine sand, water conditions, potholing, pavement and pit work. A Texas State Highway 35 crossing adds permit planning and required cover. Drainage crossings and mobilization from Yukon also affect the job scope; the price depends on the actual route and site conditions.
Where the Rockport facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Rockport
- U.S. Census Bureau, TIGER/Line 2024: Rockport boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Rockport
- U.S. Census Bureau, American Community Survey 2019 to 2023: Rockport housing units and year built
- Macrostrat geologic map compilation: map units under Rockport
- U.S. EPA Safe Drinking Water Information System: public water systems serving Rockport
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Aransas County
- U.S. Geological Survey, Elevation Point Query Service: Rockport elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Rockport
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Rockport
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Rockport, Texas
Type the address of your job in Rockport. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Rockport
All counties: Texas county list.
