Leming Texas Directional Boring: Nusil Soil, US 281 And Gallinas Creek
Quick Answer: Nusil soil is common around Leming, and we take directional boring, also called horizontal directional drilling (HDD), beneath US 281 and other local routes. The Yukon main office is 519 road miles away, a distance that matters when planning a bore near Gallinas Creek. Sandy clay loam is common about 40 inches down. It can hold an open hole, while clay may cling to the reamer. We plan the reaming and fluid for the mapped ground.
Leming bores at a glance
- Unincorporated community in Atascosa County, Texas. Population 841 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 519 miles, about 9.8 hours of driving.
- Ground: Nusil soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281 and FM 1470. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Gallinas Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Leming near Union Pacific track?
Leming is an unincorporated community in Atascosa County, where the Census Bureau counted 841 people in the 2020 Census. We take directional boring work for water, sewer, gas, electric conduit and fiber lines. Depending on the route, those lines could run beneath Verdi Road, connect properties near US 281 or pass under a local drainage crossing.
Our main office is in Yukon, Oklahoma, and Leming work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982. For a service near Tumlinson Road or a larger crossing by Gallinas Creek, our work ranges from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet.

What ground does a bore meet in Leming’s Nusil soil?
The USDA soil survey maps Nusil soil across 34% of Leming. Surface ground is often sandy: loamy fine sand covers 37% of the mapped area, and fine sand covers 34%. At about 40 inches below the surface, sandy clay loam is mapped under 60% of the area, while sandy clay covers 23% and clay covers 13%. These are mapped soil patterns, not test borings. The mix means a route near Verdi Road may move from easy cutting sand into stickier material that needs staged reaming.
| USDA soil survey, inside the Leming mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Nusil 34 percent, Wilco 18 percent, Poth 17 percent, Elmendorf 13 percent and Miguel 7 percent |
| Texture at the surface | loamy fine sand 37 percent, fine sand 34 percent and fine sandy loam 14 percent |
| Texture about 40 inches down | sandy clay loam 60 percent, sandy clay 23 percent and clay 13 percent |
| Engineering class about 40 inches down | clayey sand (SC) 53 percent, fat clay (CH) 30 percent and lean clay (CL) 15 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 20 percent of the area |
Bedrock is not mapped in the top five feet around Leming, though the geologic map shows Queen City Sand of Lutetian age below. That unit includes sandstone and siltstone, so a deeper encounter may drill differently from the soil above. Seasonal water table is not mapped within 60 inches; flood prone soils cover 4% of the area, a point to consider near Gallinas Creek. High steel corrosion risk is mapped under 20% of the area, so the line owner should consider casing and tracer wire materials for the specific route.
How do we bore Leming’s sandy clay loam?
The USDA soil survey maps sandy clay loam at about 40 inches down across much of Leming. We adjust the drilling fluid, reaming sequence and pullback timing to the soil shown along the planned route.
- Near a route mapped as sand around Leming, we use drilling fluid to help hold the bore open, then ream in stages so loose soil is less likely to cave.
- Where sandy clay loam or sticky clay is mapped, we watch the fluid returns, ream in steps and time pipe pullback to limit swelling and reamer buildup.
- Before a bore near Verdi Road, we hydrovac pothole each marked utility on the path; surface paint shows its position but not its depth.
- For a planned Gallinas Creek crossing, we track the drill head from the surface and log depth and pitch while keeping the bore beneath the channel.

Which roads, tracks or creeks might a Leming bore cross near US 281?
US 281 runs through Leming, along with FM 1470; Interstate 37 is 0.9 miles outside the mapped community boundary. A route crossing US 281 needs a different plan from a service bore along a local street. Verdi Road is the longest named street in the community at 2.41 miles, followed by Ed Davis Road at 1.61 miles and Dairy at 1.55 miles. Tumlinson Road also runs through the community. These routes give a project address and access points to check before choosing entry and exit pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 2.2 roadway miles inside | State highway office |
| FM 1470 | State highway | 0.8 roadway miles inside | State highway office |
| Interstate 37 | Highway nearby | 0.9 miles outside | State highway office |
| Union Pacific | Railroad | 0.64 track miles inside | The railroad |
| Gallinas Creek | Stream | 5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Positeus Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Galvan Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 0.64 track miles inside Leming, on its Corpus Christi Subdivision. Public maps show two street and rail crossings inside the community, so a proposed route needs checking against the track alignment. Gallinas Creek runs for 5.0 channel miles inside Leming, and mapped streets cross named streams at three locations. Positeus Creek touches or runs along the community boundary. A creek bore needs a route planned beneath the channel, with jurisdiction reviewed during planning.
Who approves a Leming bore in Atascosa County?
Leming is an unincorporated community, not a municipality with a city government. Streets fall to the county or state, depending on the road. For work in the right of way of US 281 or FM 1470, the line owner, not our drilling crew, submits the utility permit application through TxDOT’s RULIS system. The TxDOT San Antonio District reviews it. We give the utility owner the bore plan and profile, then work under its issued permit. TxDOT cover rules vary by line type, including 60 inches for electric or communication crossings and 60 inches for water crossings. A Union Pacific track crossing also requires an agreement with the railroad that sets the crossing conditions.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utility lines serve addresses in Atascosa County near Leming?
The water provider for a specific Leming address has to be confirmed with the county, the local water district or the appropriate local office before a bore is planned. Electric service providers reporting in Atascosa County include AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative. Those reports do not identify which company serves every address. Before a conduit bore near US 281, we confirm the line owner for the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, City of San Antonio, Karnes Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Atascosa County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Leming’s median housing year at 1976. The estimates show 83% of housing built from 1960 to 1999, 5% before 1960 and 12% in 2000 or later. That age mix means a bore near Tumlinson Road could pass existing service lines or newer connections. We hydrovac pothole marked utilities along the planned path before drilling near them; paint shows position, not depth.

Do you cover Leming near Poteet and Pleasanton?
Leming is in Atascosa County, 11.4 miles north of the county seat, Jourdanton, and 7.3 miles north of Pleasanton, the nearest larger city. Poteet is 6.4 miles west. The mapped community covers 4.83 square miles and sits at an elevation of 472 feet. Its ZIP codes are 78064 and 78050. From our Yukon, Oklahoma main office, the drive is 519 road miles and 9.8 hours. That distance is part of planning crew mobilization for work near US 281 or Gallinas Creek.
Places near Leming
- Directional boring in Poteet: 6.4 miles west
- Directional boring in Pleasanton: 7.3 miles south
- Directional boring in Sandy Oaks: 8.7 miles northeast
- Directional boring in Jourdanton: 11.4 miles south
- Directional boring in Elmendorf: 15.6 miles northeast
Which Leming projects call for a bore near Gallinas Creek?
- Highway crossing: A bore beneath US 281 needs a route and cover plan suited to the road right of way and the line being installed.
- Water service: A connection near Tumlinson Road needs the address specific water provider confirmed before we plan the bore path.
- Fiber conduit: A route along Verdi Road can use directional boring to pass beneath pavement without cutting the street surface.
- Creek crossing: A line beneath Gallinas Creek needs a channel route, depth plan and jurisdiction review during planning.
- Rail crossing: A route beneath the Union Pacific Corpus Christi Subdivision needs a crossing agreement with the track owner.
- Utility replacement: A bore near Ed Davis Road can avoid open cuts while the marked existing lines are exposed ahead of drilling.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Leming bore near Tumlinson Road?
A map pin matters near Tumlinson Road because a few yards can change which utilities, road edges or drainage routes a bore must clear. Send the address or pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route and likely entry and exit pits.
A short, clear service route on sandy ground near Tumlinson Road may be simpler to plan than a crossing under US 281 or Union Pacific track. Price depends on footage, pipe or conduit size, soil changes between sand and sandy clay loam, exposed utilities, pavement, creek crossings, pit and excavator needs, and sand backfill. The 519 road miles from Yukon also affect mobilization. High profile or emergency work can add planning demands.
Questions people ask about boring in Leming
Does Trinity take directional boring jobs in Leming, Atascosa County, and who staffs them?
Yes. We take directional boring work in Leming, and the job is handled by our own crews or crews at satellite yards run by drilling partners we have vetted. You work with Trinity from the first call through the bore log, whether the route is near US 281 or Gallinas Creek.
What ground should I expect for a bore through Nusil soil in Leming?
The USDA soil survey maps Nusil across 34% of Leming, with sandy clay loam mapped under 60% of the area at about 40 inches. Sandy surface soil can cut readily but may cave behind the bit; clay can cling to the reamer. We plan fluid and staged reaming for the route rather than treating the map as a test boring.
Will a Leming bore hit rock near Gallinas Creek?
Bedrock is not mapped in the top five feet of Leming, but that does not rule out deeper rock. The geologic map shows Queen City Sand of Lutetian age, including sandstone and siltstone. If a deeper route near Gallinas Creek encounters harder material, the drilling approach may need to change.
Who approves a bore beneath US 281 in Leming, and which TxDOT office reviews it?
For work in the US 281 right of way, the line owner submits the utility permit through TxDOT’s RULIS system. The TxDOT San Antonio District reviews the application. We provide the bore plan and profile to the utility owner, and the required cover depends on the line type and permit conditions.
What does a bore beneath the Union Pacific track in Leming require?
A crossing beneath the Union Pacific Corpus Christi Subdivision requires an agreement with Union Pacific. That agreement sets the crossing conditions, including casing, depth and flagging. Because 0.64 track miles lie inside Leming, the proposed route needs to be checked against the mapped track before the plan is prepared.
Can a line be bored under Gallinas Creek in Leming?
A bore can be planned beneath Gallinas Creek, which runs for 5.0 channel miles inside Leming. The route needs depth planned to stay beneath the channel. During planning, the crossing is reviewed for U.S. Army Corps of Engineers jurisdiction, and soil and access conditions help shape the entry and exit locations.
How much 811 notice is needed for a bore near Verdi Road in Leming?
Texas811 requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Verdi Road start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.
Does Leming’s distance from Yukon change a job near Pleasanton?
Leming is 519 road miles and 9.8 drive hours from our Yukon, Oklahoma main office. Pleasanton is 7.3 miles south of Leming. The Yukon distance can affect mobilization planning, while the bore route, ground and crossings near the work site determine the rest of the job scope.
What affects the cost of a directional bore under US 281 in Leming?
The scope sets the price, not the highway name alone. Length, pipe or conduit size, sandy clay loam, utility exposure, pavement, pit work and backfill all matter. A US 281 crossing may require more planning than a short service route, while a Gallinas Creek or Union Pacific crossing adds its own site conditions.
Where the Leming facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Leming
- U.S. Census Bureau, TIGER/Line 2024: Leming boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Leming population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Leming housing units and year built
- Macrostrat geologic map compilation: map units under Leming
- U.S. Department of Transportation, North American Rail Network: track owners in Atascosa County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Atascosa County
- U.S. Geological Survey, Elevation Point Query Service: Leming elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Leming
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Leming
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Leming, Texas
Type the address of your job in Leming. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Leming
Same county: Lytle · Charlotte · Christine. All counties: Texas county list.
