Elmendorf Texas Directional Boring: Wilco Soil, Calaveras Creek, Union Pacific Tracks
Quick Answer: Can we get your line beneath Calaveras Creek or a paved route without opening the surface? Yes, we do directional boring, also called horizontal directional drilling (HDD), in Elmendorf, including US 181 crossings. Elmendorf is 497 road miles from our Yukon main office, with Loop 1604 among the routes a bore may cross. Wilco soil includes sandy clay loam at about 40 inches, where clay can grip the reamer and sand can cave behind the bit.
Elmendorf bores at a glance
- Incorporated city in Bexar County and Wilson County, Texas. Population 2,683 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 497 miles, about 9.4 hours of driving.
- Ground: Wilco soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 7 percent of the area.
- Highways inside the boundary: US 181, Loop 1604 and FM 327. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Calaveras Creek and Parita Creek.
- Public water: City of Elmendorf, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Elmendorf, Bexar County?
Can we carry your line beneath an Elmendorf road without cutting it? Yes. Trinity Boring Solutions takes directional boring work in Elmendorf, which lies mostly in Bexar County. For planning underground work in Elmendorf, we use the Census Bureau Vintage 2024 population estimate of 2,683. We install water, sewer, gas, electric conduit and fiber, including routes along Cassiano Road or service connections near Loop 1604.
Our main office is in Yukon, Oklahoma, and Elmendorf work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a route near Calaveras Creek, our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982; those dates inform our Elmendorf planning.

What is Wilco soil like to bore in Elmendorf?
The USDA soil survey maps Wilco as 35 percent of Elmendorf and Wilco loamy fine sand across 24 percent of the mapped area. About 40 inches down, sandy clay loam is mapped under 54 percent of the city, while fine sand is mapped under 27 percent. The survey also reports an average clay content of 25 percent at that depth and sandy material across 34 percent. For underground work in Elmendorf, we treat these as mapped patterns, not test borings. A route can shift from sand that may cave behind the bit to clay that can cling to a reamer.
| USDA soil survey, inside the Elmendorf city limits | What is mapped |
|---|---|
| Soil series mapped | Wilco 35 percent, Aluf 27 percent, Miguel 9 percent, Duval 7 percent and Leming 7 percent |
| Texture at the surface | loamy fine sand 49 percent, fine sand 27 percent and fine sandy loam 19 percent |
| Texture about 40 inches down | sandy clay loam 54 percent, fine sand 27 percent and sandy clay 8 percent |
| Engineering class about 40 inches down | clayey sand (SC) 35 percent, lean clay (CL) 28 percent and silty sand (SM) 27 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | 7 percent of the area (0 percent hard rock, 7 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 7 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 7 percent of Elmendorf, with typical bedrock depth at 52 inches; hard bedrock is not mapped in that interval. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 4 percent of the area. High steel corrosion risk is mapped under 7 percent, so the line owner should consider casing and tracer wire protection. Carrizo Sand, a Ypresian unit of sandstone and shale, is part of the mapped geology. Its layers can call for slower drilling where the bit meets firmer material.
How do we drill Elmendorf’s sandy clay loam?
Elmendorf soil maps show both fine sand and sandy clay loam, so we plan for a hole that may loosen in sand and grip the pipe in clay. The route and field conditions guide the drilling steps.
- Near Wilco loamy fine sand, we use drilling fluid to support the hole, then ream in stages so the sandy ground is less likely to cave.
- Where sandy clay loam appears about 40 inches down, we adjust the fluid and ream in stages to limit clay buildup on the tooling.
- Before a route near Calaveras Creek is drilled, we check the planned depth and creek conditions, including possible federal jurisdiction during planning.
- At marked utilities near City of Elmendorf water routes, we hydrovac pothole to expose each line, then track and log the drill head as the bore advances.

What is in the way of a new line in Elmendorf near Calaveras Creek?
Loop 1604, US 181 and FM 327 run inside Elmendorf, so a bore may need to pass beneath highway pavement or its right of way. Loop 1604 is the longest named street at 4.1 miles within city limits. Old Corpus Christi Road covers 2.0 miles, while Cassiano Road covers 1.5 miles. Kilowatt Road adds another local route. Boring below pavement can leave the travel surface intact, with entry and exit pits placed off the paved roadway where the route allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 1.5 roadway miles inside | State highway office |
| Loop 1604 | State highway | 2.7 roadway miles inside | State highway office |
| FM 327 | State highway | 2.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 7.72 track miles inside | The railroad |
| Calaveras Creek | Stream | 1.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Parita Creek | Stream | 0.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Eagle Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| San Antonio River | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Chupaderas Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Calaveras Lake | Lake or pond | 3,211 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Braunig Lake | Lake or pond | 1,300 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific has 7.72 track miles inside Elmendorf, and public mapping shows three street and rail crossings. A route near the tracks needs coordination with the railroad. Calaveras Creek runs 1.05 channel miles in the city, and Parita Creek runs 0.15 miles. Public mapping shows one street crossing of a named stream. Calaveras Lake and Braunig Lake are within one mile but outside city limits, so a nearby route still needs its exact crossing conditions checked.
Do I need a permit to bore Elmendorf roads or cross Union Pacific?
For a bore beneath Loop 1604, US 181 or FM 327, cover depth helps set the profile: TxDOT rules call for 60 inches at a crossing for electric and communication lines, and 60 inches for water or pressurized sewer. The TxDOT San Antonio District reviews the utility permit application in RULIS, filed by the line owner; we prepare the bore plan and profile for that filing. A Union Pacific crossing needs an agreement from the railroad, which sets its crossing conditions. For Calaveras Creek, planning includes checking whether the U.S. Army Corps of Engineers has jurisdiction. Because Elmendorf is incorporated, we account for city ownership of its streets when considering underground work.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Elmendorf near City of Elmendorf water?
The City of Elmendorf public water system uses groundwater wells and reports 1,507 service connections serving 4,221 people. That makes the water line owner a key contact before a bore near city water routes. Electric service providers reporting in Bexar County include City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. We confirm the owner of the specific line before planning conduit near Kilowatt Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Elmendorf | Public water system | Groundwater wells | 1,507 connections, 4,221 people served |
| City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Bexar County and Wilson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Elmendorf’s median housing year at 1995, which we consider in underground work planning. The estimates show 9 percent of housing built before 1960, 50 percent from 1960 to 1999 and 41 percent from 2000 onward. That mix can mean either a replacement route or a newer service near Old Corpus Christi Road. Before drilling, we use hydrovac potholing to expose marked lines, including water infrastructure and the electric owner’s facilities, because surface marks do not show burial depth.

Where is Elmendorf in relation to China Grove?
Elmendorf is in Bexar County, with 2 percent of its area in Wilson County. The incorporated city covers 6.14 square miles at an elevation of 544 feet and uses ZIP codes 78112 and 78223. Sandy Oaks is 7.2 miles southwest, and China Grove is 9.7 miles north. Floresville is 12.0 miles southeast. San Antonio, the county seat, lies 18.9 miles northwest. From our Yukon yard, the road distance is 497 miles and the drive takes 9.4 hours, which is part of planning mobilization for a job here.
Places near Elmendorf
- Directional boring in Sandy Oaks: 7.2 miles southwest
- China Grove: 9.7 miles north
- Directional boring in Floresville: 12 miles southeast
- Directional boring in St. Hedwig: 13.5 miles northeast
- Directional boring in La Vernia: 13.7 miles northeast
Which jobs call for a bore in Elmendorf near Loop 1604?
- Highway crossing: A bore beneath Loop 1604 can keep the paved route uncut while the line passes below the highway.
- Water service: A new connection near the City of Elmendorf system needs the route and existing groundwater lines identified before drilling.
- Fiber route: Conduit along Old Corpus Christi Road can be installed below the surface, with marked utilities exposed along the bore path.
- Creek crossing: A line near Calaveras Creek needs a planned depth and route that account for the channel and creek bank.
- Rail crossing: Work beneath Union Pacific tracks requires the railroad’s crossing agreement and its conditions for casing, depth and flagging.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring in Elmendorf near Kilowatt Road?
A map pin matters near Kilowatt Road because it shows whether the bore meets pavement, a marked utility or another crossing. Send the address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us see the route and access near streets such as Cassiano Road before we scope the work.
Elmendorf’s sandy clay loam and fine sand make ground conditions an early cost factor: loose sand may need staged reaming, while clay can hold the reamer. Length, pipe size and utilities to expose also shape the job. A Loop 1604 pavement crossing or Union Pacific track adds crossing requirements, and Calaveras Creek or drainage affects the route. Pits, excavator time, backfill, emergency timing and mobilization from Yukon matter too, given the 497 road miles to Elmendorf.
Questions people ask about boring in Elmendorf
Does Trinity Boring Solutions take directional boring work in Elmendorf, Bexar County?
Yes. We take directional boring work in Elmendorf and keep the same Trinity contact involved from the first call through the bore log, whichever vetted partner contractor yard supports the job. Our own crews also handle work here. For a route near Cassiano Road, we scope the line and site before deciding how to staff it.
Can you bore a line under Calaveras Creek in Elmendorf?
A bore can be planned beneath Calaveras Creek without cutting across the channel. The route needs a depth and profile suited to the crossing, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Creek banks and access also affect where the entry and exit pits can sit.
Who runs Elmendorf’s public water system, and where does its water come from for underground work planning?
The City of Elmendorf owns the public water system, and it draws from groundwater wells. It reports 1,507 service connections and a population served of 4,221. For a proposed service near Old Corpus Christi Road, identifying the water line owner and exposing marked lines helps keep the bore clear of existing infrastructure.
Who owns electric lines in Elmendorf, Bexar County, and who confirms conduit specs?
Several providers report electric service in Bexar County, including City of San Antonio and Bandera, Guadalupe Valley, Karnes and Pedernales electric cooperatives. We confirm which utility owns the line at the specific Elmendorf address, then check conduit requirements with that owner before a bore near Kilowatt Road.
Who is in charge of Cassiano Road in Elmendorf, and does it need to be cut?
Cassiano Road is a city street because Elmendorf is incorporated. A directional bore can pass beneath the road without cutting the pavement, subject to the route and applicable approvals. The entry and exit pits are planned in accessible ground beside the road rather than through the traveled surface.
How old are homes and buried lines near Old Corpus Christi Road in Elmendorf?
Elmendorf’s median housing year is 1995, according to the American Community Survey 2019 to 2023 estimates. The housing ages vary, so a project along Old Corpus Christi Road could involve either replacement infrastructure or a new service. We expose marked utilities before drilling near them because the surface marks do not show depth.
Does Trinity serve Sandy Oaks and rural sites outside Elmendorf?
Yes. We take work in nearby Sandy Oaks and rural locations outside Elmendorf as well as jobs within the city. Sandy Oaks is 7.2 miles southwest of Elmendorf. The exact address matters for the route, access and mobilization, especially when a site is beyond the city streets.
How much notice does Texas811 need for a bore near Loop 1604 in Elmendorf?
The excavator or contractor requests the Texas811 locate ticket and describes the planned bore path near Loop 1604. Texas law requires notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work slips more than 14 days past the notice, request a new ticket; renew marks that wear off or move before continuing.
What affects the cost of directional boring near US 181 in Elmendorf?
The price depends on the specific US 181 route, bore length and pipe or conduit size. Elmendorf’s mapped sand and sandy clay loam, pavement, utilities to expose and any creek or drainage crossing affect the work plan. Pits, equipment time, backfill, urgency and mobilization from Yukon also matter. We scope the exact site before preparing a quote.
Where the Elmendorf facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Elmendorf
- U.S. Census Bureau, TIGER/Line 2024: Elmendorf boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Elmendorf
- U.S. Census Bureau, American Community Survey 2019 to 2023: Elmendorf housing units and year built
- Macrostrat geologic map compilation: map units under Elmendorf
- U.S. EPA Safe Drinking Water Information System: public water systems serving Elmendorf
- U.S. Department of Transportation, North American Rail Network: track owners in Bexar County and Wilson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bexar County and Wilson County
- U.S. Geological Survey, Elevation Point Query Service: Elmendorf elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Elmendorf
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Elmendorf
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Elmendorf, Texas
Type the address of your job in Elmendorf. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Elmendorf
Same county: San Antonio · Converse · Universal City · Live Oak · Timberwood Park · Leon Valley · Helotes · Lackland AFB · Kirby · Selma · Alamo Heights · Fair Oaks Ranch. All counties: Texas county list.
