trinityboringsolutions.com

Alvin Texas Directional Boring: Lake Charles Clay, Texas State Highway 35, Austin Bayou

Quick Answer: Alvin is an incorporated small city in Brazoria County, so streets such as Gordon Street belong to the city. We do directional boring, also called horizontal directional drilling (HDD), for routes under Austin Bayou and its approaches. Alvin is 484 road miles from our Yukon, Oklahoma main office, and Texas State Highway 35 can put highway right of way in the route. Lake Charles clay can grip pipe, so staged reaming and a same day pullback matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Alvin bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 29,869 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 484 miles, about 9.6 hours of driving.
  • Ground: Lake Charles soil is mapped on 48 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 35, Texas State Highway 6, FM 1462, Texas State Highway 35 Business and Texas State Highway 288. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: BNSF Railway and Union Pacific, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Austin Bayou, Mustang Bayou, Brazos Rv Authority Canal System and American Canal.
  • Public water: City of Alvin, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Alvin along Austin Bayou?

Alvin is an incorporated city in Brazoria County, so its streets, including Gordon Street, belong to the city itself. The Census Bureau Vintage 2024 estimate puts Alvin at 29,869 residents. We install water, sewer, gas, electric conduit and fiber, with routes that may follow Gordon Street or cross Texas State Highway 6; the line and route determine the bore plan.

Our main office is in Yukon, Oklahoma, and Alvin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been part of our work since 1982; four decades of boring informs how we stage reaming and manage fluid in Alvin’s heavy clay. Our family business began in 1965, and Lake Charles clay is a local reason to plan the pullback before opening the hole.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Lake Charles soil survey show beneath Alvin?

The USDA soil survey maps Lake Charles soil across 48 percent of Alvin, with Bernard series across 31 percent and Edna across 7 percent. At about 40 inches below the surface, 90 percent of mapped ground is clay; the surface texture is clay across 49 percent and clay loam across 32 percent. In Alvin, we treat these mapped patterns as planning references, not test borings, before selecting a boring route. On a route near Loop 35, the clay can stick to the reamer and swell around pipe, so the bore plan needs controlled fluid and staged enlargement.

USDA soil survey, inside the Alvin city limitsWhat is mapped
Soil series mappedLake Charles 48 percent, Bernard 31 percent and Edna 7 percent
Texture at the surfaceclay 49 percent, clay loam 32 percent and loam 9 percent
Texture about 40 inches downclay 90 percent
Engineering class about 40 inches downfat clay (CH) 90 percent and lean clay (CL) 3 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches48 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel95 percent of the area

USDA mapping does not show bedrock in the top five feet of Alvin, though that says nothing about deeper material. Seasonal water table is mapped within 60 inches across 48 percent of the city, so pits near Austin Bayou may need pumping and compact footprints. Flood prone soils cover 6 percent. With Lake Charles clay mapped here, uncoated steel casing and tracer wire need attention; the line owner selects coatings, while HDPE is outside that steel corrosion issue. The geologic map shows Pleistocene Delta silt and clay, consistent with sticky drilling rather than a rock bit.

How do we drill Alvin’s heavy clay?

On routes in Lake Charles clay, we keep the fluid plan restrained and organize reaming around the soil’s tendency to cling to the tool and pipe. A pothole and tracking plan matters on Loop 35.

  1. Lake Charles clay can ball on a reamer, so we use thinner fluid with polymer and enlarge the Alvin bore in stages.
  2. Because heavy clay can swell against pipe, we plan the pullback for the day the final hole is opened and watch fluid returns near Texas State Highway 6 pavement.
  3. Where Austin Bayou or mapped seasonal water affects pits, compact entry and exit pits and pumping help keep the work area usable.
  4. Near the City of Alvin water system, we hydrovac expose marked lines; for electric conduit near Loop 35, we first identify the line owner among CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What might a bore cross on Alvin’s Loop 35?

Texas State Highway 35 has 13.4 mapped roadway miles inside Alvin, while Texas State Highway 6 has 7.4 and Texas State Highway 288 has 2.8. Loop 35 runs 10.3 miles in the city, Alvin Bypass 9.78 miles and Gordon Street 4.79 miles. A route along these roads may involve pavement, driveways or other buried lines. Directional boring can pass below the surface without cutting the roadway, but the bore profile and access pits still have to fit the particular crossing.

CrossingTypeMapped extentWho has a say
Texas State Highway 35State highway13.4 roadway miles insideState highway office
Texas State Highway 6State highway7.4 roadway miles insideState highway office
FM 1462State highway5.2 roadway miles insideState highway office
Texas State Highway 35 BusinessState highway4.8 roadway miles insideState highway office
Texas State Highway 288State highway2.8 roadway miles insideState highway office
FM 528State highway2.5 roadway miles insideState highway office
FM 517State highway2.1 roadway miles insideState highway office
FM 2403State highway1.7 roadway miles insideState highway office
FM 521State highway0.1 roadway miles insideState highway office
FM 2004State highway0.1 roadway miles insideState highway office
Spur 28Highway nearby1.3 miles outsideState highway office
BNSF RailwayRailroad4.16 track miles insideThe railroad
Union PacificRailroad0.7 track miles insideThe railroad
Austin BayouStream12.42 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 4.16 track miles in Alvin and Union Pacific has 0.7; public mapping records 9 street and rail crossings. Each track crossing needs an agreement from the railroad that owns it. Austin Bayou runs 12.42 channel miles inside the city, and mapped street crossings of named streams total 34. Cox Lake and Lost Lake are also inside city limits, so a route near a water feature needs its own crossing review.

Who approves work near Alvin’s Texas State Highway 35?

For electric or communication lines crossing Texas State Highway 35, 60 inches of cover below the lowest crossed grade sets the depth; along the right of way, the minimum is 48 inches. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer crossings need 60 inches. The line owner applies through TxDOT’s RULIS system, and the TxDOT Houston District reviews it; we prepare the bore plan and profile and work under the owner’s permit. On Alvin’s city streets, we account for city ownership when planning a boring route and coordinating the work. A BNSF Railway or Union Pacific crossing needs an agreement with that railroad, and Austin Bayou is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities and buried lines matter in Alvin and Brazoria County?

The City of Alvin public water system uses groundwater wells and reports 8,748 service connections serving 26,244 people. For an electric conduit route in Brazoria County, CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report service; the line owner must be identified for the specific route. That check matters near Loop 35, where a planned conduit bore may pass existing water or electric lines.

Line ownerWhat it isSourceSize
City of AlvinPublic water systemGroundwater wells8,748 connections, 26,244 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Alvin’s median housing year at 1984, useful context as we plan underground work. Alvin’s survey shows this housing age mix: 9 percent before 1960, 64 percent from 1960 to 1999, and 27 percent in 2000 or later, useful context for our boring plans. A replacement bore near Alvin Bypass may need to fit around older buried lines, while newer construction can call for service extensions. We hydrovac pothole marked utilities on the route before drilling near them because surface marks do not show depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Do we cover Alvin and nearby League City?

Alvin is in Brazoria County, 21.4 miles southwest of county seat Angleton. The city covers 22.91 square miles and sits at an elevation of 41 feet. We use Alvin’s ZIP codes, 77511 and 77583, to identify the service area when reviewing underground boring requests. Hillcrest Village is 2.3 miles south, Friendswood is 5.9 miles north, Santa Fe is 7.8 miles east, League City is 8.3 miles northeast and Liverpool is 9.0 miles south. From our Yukon, Oklahoma yard, Alvin is 484 road miles away and a 9.6 hour drive, which affects mobilization for work near Texas State Highway 35.

Places near Alvin

What bores might run along Alvin’s Gordon Street?

  • Highway crossing: A bore beneath Texas State Highway 35 needs a profile that meets the cover depth and stays below the paved lanes.
  • Water service: A service near the City of Alvin water system can be routed beneath Gordon Street without cutting the roadway.
  • Fiber conduit: A conduit route along Alvin Bypass needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A bore near Austin Bayou keeps the channel bank uncut, with waterway jurisdiction checked during planning.
  • Rail crossing: A route beneath BNSF Railway or Union Pacific depends on an agreement with the railroad that owns the track.
  • Drainage crossing: A bore near Cox Lake uses entry and exit pits on land while the line passes beneath the surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I price a bore near Alvin’s BNSF Railway?

For a quote on a bore near BNSF Railway in Alvin, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. For a Loop 35 route, show the crossing points and any known pits so we can assess the layout.

A straight route on a clear stretch of Gordon Street, with one known line and no pavement, creek or rail crossing, is simpler to plan. Length, pipe size, soil, utility crossings, pavement, drainage, pit work and mobilization all affect the job. Lake Charles clay can call for staged reaming; a crossing beneath Texas State Highway 35 adds permit and depth planning, while BNSF Railway adds a railroad agreement. The 484 road miles from Yukon also affect how crews and equipment are mobilized.

Questions people ask about boring in Alvin

Does Trinity take directional boring work in Alvin and Brazoria County, and who staffs it?

Yes. Trinity takes directional boring work in Brazoria County, including Alvin. You work with Trinity through the bore log, whether our own crew or a vetted partner contractor is on site. The Yukon main office coordinates the job, and partner drilling contractors operate the satellite yards that support Alvin work.

How do Alvin’s older houses and buried lines along Alvin Bypass affect replacement bores?

The American Community Survey puts Alvin’s median housing year at 1984, with 9 percent of homes built before 1960. Replacement work near Alvin Bypass may have to fit around existing buried services, while newer housing can mean service extensions. We expose marked lines by hydrovac before the drill nears them.

Can groundwater or flood prone ground near Austin Bayou fill bore pits in Alvin?

It can affect pit planning. The USDA soil survey maps seasonal water table within 60 inches across 48 percent of Alvin, and flood prone soils across 6 percent. Near Austin Bayou, we plan compact pits and pumping where conditions call for them, and check the water crossing during route planning.

Does Lake Charles soil in Alvin corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across 95 percent of Alvin, so the line owner should consider casing and tracer wire materials. The owner selects any coatings for steel. HDPE does not have the same steel corrosion concern in Lake Charles clay, but pipe choice depends on the line design.

What ground does an Alvin bore pass through in Lake Charles soil?

The USDA soil survey maps Lake Charles soil across 48 percent of Alvin. About 40 inches down, clay is the mapped texture across 90 percent of the area; at the surface, clay accounts for 49 percent. That sticky ground can cling to the reamer, so we plan staged enlargement and controlled fluid.

Will an Alvin bore hit rock below the mapped ground?

Bedrock is not mapped in Alvin’s top five feet, but that does not rule out deeper rock. The geologic map shows Pleistocene Delta silt and clay. For a route near Gordon Street, the mapped material points to clay handling; actual conditions still guide the drill setup as the bore advances.

How much notice does Texas811 need for a bore along Alvin’s Loop 35?

Before excavation along Loop 35, the person arranging the work requests a locate from Texas811 at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start moves more than 14 days beyond the notice, request again. Have faded or moved marks refreshed before work continues.

How far is Alvin from the Yukon office, and does League City change mobilization?

From our Yukon, Oklahoma main office, Alvin is 484 road miles away and a 9.6 hour drive, which shapes how we plan travel. League City is 8.3 miles northeast of Alvin, but mobilization is based on the job location and scope, not that nearby city. A bore near Texas State Highway 35 still needs its own route and access review.

What affects the cost of a directional bore near Texas State Highway 35 in Alvin?

The route length, pipe size, Lake Charles clay, marked utility crossings, pavement, pits and any creek or railroad crossing all affect the job. A Texas State Highway 35 crossing also needs permit and depth planning. The 484 road miles from Yukon can affect mobilization; an address, size, footage and route sketch help us assess the scope.

Where the Alvin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Alvin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Alvin, Texas

Type the address of your job in Alvin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Alvin

Same county: Pearland · Lake Jackson · Angleton · Manvel · Iowa Colony · Clute · Freeport · Richwood · West Columbia · Sweeny · Brazoria · Wild Peach Village. All counties: Texas county list.