trinityboringsolutions.com

Briggs Texas Directional Boring: Bolar Clay, US 183 and Berry Creek

Quick Answer: Need a line beneath US 183 or Berry Creek without opening the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Briggs, Texas for routes like these. The Yukon, Oklahoma main office is 381 road miles from Briggs, a factor when we plan work near FM 2657. Bolar clay loam is common here, and clay can cling to the reamer, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Briggs bores at a glance

  • Unincorporated community in Burnet County, Texas. Population 101 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 381 miles, about 7.4 hours of driving.
  • Ground: Bolar soil is mapped on 36 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 91 percent of the area.
  • Highways inside the boundary: US 183. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Briggs beneath US 183?

Can you get a line beneath US 183 without cutting the surface? Briggs is an unincorporated community in Burnet County, and the 2020 Census counted 101 people; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, routing work along Church Street or toward US 183 when the job calls for it.

Our main office is in Yukon, Oklahoma, and Briggs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. We are a family business started in 1965 and have done directional boring since 1982; a planned bore near FM 2657 gets that experience applied to its own route and ground.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Bolar soil affect boring in Briggs?

The USDA soil survey maps Bolar clay loam across 36 percent of Briggs and Purves clay across 35 percent. Tarpley clay accounts for 14 percent, while Houston Black and Brackett make up the rest. At the surface, the mapped texture is clay over 58 percent of the area and clay loam over 42 percent. About 40 inches down, bedrock is the mapped texture across 91 percent, with clay mapped across 9 percent. These are mapped soil patterns, not test borings, so a site check still matters.

USDA soil survey, inside the Briggs mapped community boundaryWhat is mapped
Soil series mappedBolar 36 percent, Purves 35 percent, Tarpley 14 percent, Houston Black 9 percent and Brackett 6 percent
Texture at the surfaceclay 58 percent and clay loam 42 percent
Texture about 40 inches downbedrock 91 percent and clay 9 percent
Engineering class about 40 inches downfat clay (CH) 9 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches91 percent of the area (86 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel58 percent of the area

The survey puts typical bedrock depth at 21 inches, with hard bedrock mapped within five feet across 86 percent of Briggs and weathered bedrock across 6 percent. A drill may slow at hard rock or steer differently where soil meets rock. Seasonal water table and flood prone soils are not mapped within five feet. High steel corrosion risk is mapped across 58 percent, a concern for uncoated casing or tracer wire; the line owner selects protection, while HDPE is not affected by that soil corrosion concern. Mapped units include Stony calcareous clay solution residuum of Cenozoic age and Walnut clay of Albian age.

How is a bore run through Briggs bedrock?

Bolar clay loam and shallow mapped bedrock call for a plan that accounts for changing ground. Along a route such as FM 2657, we locate marked lines, track the drill head and adjust the tooling to what the bore encounters.

  1. We hydrovac each marked utility along a planned route such as Loop 308 before drilling near it; surface paint does not show how deep a line sits.
  2. In Bolar clay loam, we use controlled fluid and staged reaming to manage sticky cuttings, then plan to pull the pipe while the bore stays open.
  3. Where the shallow bedrock mapped around Briggs changes the ground, we check depth and pitch as the head advances and adjust the tooling for rock.
  4. For a route near Berry Creek or the unnamed drainage, we keep the bore path under review and set the entry and exit pits in dirt, not pavement.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a line have to go under Berry Creek near Briggs?

US 183 is the highway mapped inside Briggs, with 0.6 roadway miles in the community. FM 2657 is the longest named street at 1.09 miles. Church Street has 0.32 miles mapped, while Loop 308 and Dillingham Cemetery Road each have 0.31 miles. These streets give a bore plan a local route to work from, but the exact crossing point determines access and how the line is exposed before drilling.

CrossingTypeMapped extentWho has a say
US 183US highway0.6 roadway miles insideState highway office
Berry CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Mill CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Briggs or within one mile outside the community boundary, and no lakes or ponds are mapped within one mile. Berry Creek is 0.1 miles from the boundary and Mill Creek is 0.6 miles away; neither is mapped as an in community stream crossing. The community has 1.16 miles of unnamed drainage, so a route near that drainage needs its own site review. No mapped street crossings of named streams are shown inside the community.

Who approves a bore in Burnet County near Briggs?

US 183 and FM 2657 are state highways, so work in their right of way needs a TxDOT utility permit. The TxDOT Austin District reviews it, while the utility owner files through the online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. For a highway crossing, TxDOT rules set cover based on line type, including 60 inches for electric, communication and water lines and pressurized sewer at crossings. A bore beneath an existing highway is installed by boring or tunneling, with casing and an extension beneath all travel lanes on rural highways.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Burnet County near Briggs?

The water provider for a specific Briggs address has to be confirmed with Burnet County or the local water district before a bore is planned; public water records do not match a provider to this place. For electric service reported in Burnet County, the utilities are Oncor Electric Delivery Company and Pedernales Electric Cooperative. Neither should be assumed to serve every address, so the line owner needs to be confirmed before planning a conduit bore near US 183.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Pedernales Electric CooperativeElectric utilities reporting service in Burnet CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Briggs at 2005. The survey estimates 19 percent of homes were built before 1960, 17 percent from 1960 to 1999 and 64 percent in 2000 or later. That mix can mean a project is replacing older pipe or adding a newer service along Church Street. We hydrovac marked utilities on the bore path before drilling near them, since paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Briggs and nearby Liberty Hill?

Briggs is an unincorporated community in Burnet County with no city government, so street and permit authority rests with the county or state. The community covers 0.55 square miles at an elevation of 1,086 feet and uses ZIP code 78608. Florence is 8.4 miles southeast; Bertram is 13.2 miles southwest; and Liberty Hill, the nearest larger city, is 15.7 miles south. Burnet, the county seat, is 21.1 miles southwest. Briggs is 381 road miles and 7.4 drive hours from our Yukon, Oklahoma main office.

Places near Briggs

What boring work comes up along FM 2657 in Briggs?

  • Highway crossing: A bore beneath US 183 keeps the line below the travel surface, with the right of way plan reviewed through TxDOT.
  • Water service: A new service routed from a confirmed provider near Church Street can use a bore to avoid opening the full street route.
  • Fiber conduit: A conduit run along FM 2657 needs marked utilities exposed before the drill approaches them.
  • Drainage crossing: A proposed route near Berry Creek needs a site specific plan for the channel and entry and exit access.
  • Street connection: A service along Loop 308 can be bored between pits to avoid cutting the pavement or driveway in the route.
  • Acreage line: A longer run toward Liberty Hill can be scoped around the pipe size, mapped clay and bedrock, and access for equipment.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore on Dillingham Cemetery Road in Briggs?

For a Dillingham Cemetery Road estimate, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help show the route. Tell us if the line must cross US 183 or a drainage, since those details can change the bore plan before we price the work.

A short, direct route on a street such as Church Street, with clear utility marks and no pavement or drainage crossing, is simpler to plan. The scope gets harder with more footage, larger pipe, Bolar clay or shallow bedrock, and utilities that must be crossed and exposed. Concrete, pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. A US 183 right of way crossing or mobilization from 381 road miles away adds planning factors, as can urgent or high profile work.

Questions people ask about boring in Briggs

Does Trinity take directional boring work in Briggs, Burnet County, and who staffs it?

Yes. We take directional boring work in Briggs and handle the job with our own crews or crews at satellite yards operated by partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, even when the crew is not from Yukon. That applies to planned routes near US 183 as well as other work in Burnet County.

Does Bolar soil in Briggs corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 58 percent of Briggs, including ground mapped as Bolar clay loam. The line owner should weigh that risk for steel casing or tracer wire and select any needed protection. HDPE is not affected by this soil corrosion concern. A site review along FM 2657 can help confirm the conditions at the planned route.

What ground will a bore go through in Briggs Bolar soil?

The USDA soil survey maps Bolar clay loam over 36 percent of Briggs and Purves clay over 35 percent. Clay and clay loam cover the mapped surface, while at about 40 inches bedrock is shown across 91 percent of the area. Those are survey patterns rather than test borings, so a route near Church Street still needs site specific planning.

Will a directional bore in Briggs encounter bedrock?

Bedrock is mapped within five feet across 91 percent of Briggs, with hard bedrock mapped across 86 percent and weathered bedrock across 6 percent. The survey lists typical bedrock depth as 21 inches. A bore near FM 2657 may move from soil into rock, which can slow drilling and affect steering.

Who approves a bore under US 183 in Briggs?

For work in the US 183 right of way, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Austin District reviews the application, and we provide the bore plan and profile for work under the permit issued to the utility owner. The required cover depends on the line type and the permitted crossing.

Can you bore a line under Berry Creek near Briggs?

A bore can be planned for a creek crossing, but the exact Berry Creek route and channel conditions need review first. Berry Creek is mapped 0.1 miles from the Briggs boundary, not as an in community stream. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Can I reach Trinity after hours about an urgent bore near Loop 308 in Briggs?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for an urgent job near Loop 308. We can discuss the location and what line needs to go in, then determine what work and access the site requires. Urgent or high profile work can change the job scope.

How much notice does Texas811 need before a bore on FM 2657 in Briggs?

Paint on FM 2657 shows utility position, not depth, so marked lines still need exposure before drilling near them. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 183 in Briggs?

The scope depends on length, pipe or conduit size, Bolar clay and shallow bedrock, utility crossings, pavement, pits and equipment time. A US 183 right of way crossing adds permit and bore planning details, while Berry Creek or drainage work can change the route. The 381 road miles from Yukon also affect mobilization. We need the location and job details to assess the work.

Where the Briggs facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Briggs

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Briggs, Texas

Type the address of your job in Briggs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Briggs

Same county: Marble Falls · Burnet · Granite Shoals · Meadowlakes · Cottonwood Shores · Horseshoe Bay · Highland Haven · Double Horn. All counties: Texas county list.