Florence Texas Directional Boring: Fairlie Clay, FM 487 and South Salado Creek
Quick Answer: FM 487 and South Salado Creek are the main crossings to plan around, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Florence, Texas. Florence is 369 road miles from our Yukon, Oklahoma main office, with Patterson Avenue among the streets a route may follow. Fairlie clay and shallow bedrock shape the work: sticky clay can load a reamer, while rock near the surface can slow the cut. That ground calls for staged reaming and a careful bore profile before a line goes beneath the creek or highway.
Florence bores at a glance
- Incorporated city in Williamson County, Texas. Population 1,211 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 369 miles, about 7.1 hours of driving.
- Ground: Fairlie soil is mapped on 40 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 94 percent of the area.
- Highways inside the boundary: FM 487, Texas State Highway 195 and FM 970. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: South Salado Creek.
- Public water: City of Florence, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near FM 487 in Florence?
Trinity Boring Solutions takes directional boring jobs in Florence, Williamson County, where the Census Bureau Vintage 2024 estimate puts the population at 1,211. We install water, sewer, gas, electric conduit and fiber; along FM 487 or Patterson Avenue, the route depends on which service needs a new crossing or connection.
Our main office is in Yukon, Oklahoma, and Florence work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa; by comparison, a Florence job along FM 487 may be a shorter service run or utility crossing. Our family business began in 1965, and our directional boring experience since 1982 informs route planning along Main Street in Florence.

What does Fairlie soil mean for a bore in Florence?
Florence ground is mapped largely as Fairlie, Doss and Denton soils, with clay or silty clay at the surface. The USDA soil survey maps Fairlie across 40% of the area; clay covers 53% and silty clay 42%. About 40 inches down, the mapped texture is bedrock across 53% and clay across 47%, with average clay content of 50%. We treat Fairlie and Doss soil series as mapped patterns in Florence, not test borings, when planning underground work. Sticky clay can build on a reamer, so crews may use thinner fluid, polymer and staged reaming to keep the hole workable.
| USDA soil survey, inside the Florence city limits | What is mapped |
|---|---|
| Soil series mapped | Fairlie 40 percent, Doss 22 percent, Denton 20 percent, Tinn 6 percent and Crawford 6 percent |
| Texture at the surface | clay 53 percent, silty clay 42 percent and clay loam 3 percent |
| Texture about 40 inches down | bedrock 53 percent and clay 47 percent |
| Engineering class about 40 inches down | fat clay (CH) 47 percent |
| Average clay content about 40 inches down | 50 percent |
| Bedrock mapped within 60 inches | 94 percent of the area (31 percent hard rock, 62 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 94% of Florence, with hard bedrock in 31% and weathered bedrock in 62%. The mapped geologic unit is Edwards and Comanche Peak Limestones, undivided, of Albian age, so a bore may shift from clay into limestone or chert and need rock tooling. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6%; South Salado Creek still needs a crossing plan. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE does not carry that steel concern.
How do crews bore Florence ground with bedrock near the surface?
We plan Florence bores around Fairlie clay and shallow limestone, then match the tooling and fluid to what the route encounters. Near South Salado Creek or FM 487, the bore profile also has to account for the crossing and nearby utilities.
- Fairlie clay can stick to the reamer and grip pipe, so we can thin the drilling fluid, add polymer and ream in stages before pulling pipe the same day.
- With bedrock mapped within 60 inches across much of Florence, crews may slow down and change to rock tooling when the bore meets limestone or chert.
- Near hard clay beneath FM 487, we watch fluid returns and keep pressure controlled so drilling fluid does not lift pavement.
- At South Salado Creek, we track the drill head from the surface, log depth and pitch, and plan the bore to stay below the channel.

What is in the way of a new line in Florence near South Salado Creek?
Florence has FM 487, Texas State Highway 195 and FM 970 within its limits, with Texas State Highway 138 just outside them. A bore beneath an existing highway avoids cutting the pavement, but the route and pits still need to fit the roadway. Patterson Avenue is the longest named street at 1.01 miles, followed by Main Street at 0.74 miles and Love Avenue at 0.61 miles. These streets help define practical routes for service lines and utility crossings.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 487 | State highway | 1.3 roadway miles inside | State highway office |
| Texas State Highway 195 | State highway | 0.4 roadway miles inside | State highway office |
| FM 970 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 138 | Highway nearby | 0.3 miles outside | State highway office |
| South Salado Creek | Stream | 1.04 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Salado Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Rocky Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Florence or within one mile outside the limits, so a mapped rail crossing is not part of the local route picture. South Salado Creek runs 1.04 channel miles through the city, and four mapped street crossings cross named streams. North Salado Creek and Rocky Creek are also nearby, at 0.7 and 0.9 miles from the limits. No lakes or ponds are mapped within one mile; a creek route still needs depth and access planning.
Who approves a bore in Florence in Williamson County?
For work in Florence, the approval path depends on whether the bore follows a city street, FM 487 or a creek. Florence is incorporated, so its city streets belong to the city; we do not assume a city permit detail that is not established here. FM 487 is a state highway, so the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the utility owner’s filing and work under the permit issued to that owner. Existing highway pavement is bored or tunneled beneath, with the permit setting applicable crossing details. A South Salado Creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Florence water system?
The City of Florence public water system uses purchased surface water and reports 521 service connections serving 1,136 people. For electric service in Williamson County, records list Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those county listings do not identify the provider at every Patterson Avenue address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Florence | Public water system | Surface water bought from another system | 521 connections, 1,136 people served |
| Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Williamson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Florence’s median housing year at 1975; 37% of homes were built before 1960, 43% from 1960 to 1999 and 20% in 2000 or later. On streets such as Patterson Avenue, that mix can mean a replacement route beside older service lines or a new connection for later housing. We hydrovac expose marked utilities on the planned path before drilling near them, since locate marks show position, not depth.

Do you cover Florence and nearby Serenada?
We take directional boring work across Florence and Williamson County, including routes toward Serenada, 10.6 miles southeast, and Briggs, 8.4 miles northwest. Florence sits at 996 feet elevation and covers 0.91 square miles, with ZIP code 76527. Jarrell is 10.7 miles east and is the nearest larger city; Georgetown, the county seat, is 13.2 miles southeast. From our Yukon, Oklahoma main office, Florence is 369 road miles away and a 7.1 hour drive, which matters when planning crew mobilization for a project on FM 487 or a rural service route.
Places near Florence
- Directional boring in Briggs: 8.4 miles northwest
- Directional boring in Serenada: 10.6 miles southeast
- Directional boring in Jarrell: 10.7 miles east
- Directional boring in Sonterra: 11.8 miles east
- Directional boring in Santa Rita Ranch: 12.5 miles south
What kinds of bores come up on Patterson Avenue in Florence?
- Highway crossing: A bore beneath FM 487 keeps the route below the roadway rather than cutting across its pavement.
- Street service: A water or sewer connection along Patterson Avenue can use a bore to avoid opening the street surface.
- Creek crossing: A route beneath South Salado Creek needs a planned profile that stays below the channel and accounts for creek access.
- Fiber conduit: A conduit route near Main Street can be laid out around marked utilities before the drill approaches them.
- Water connection: A service tied to the City of Florence system needs its route and line owner confirmed before the bore is planned.
- Rural service: A line toward Briggs can be scoped for its footage, access and mobilization from the Yukon office.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near FM 487 in Florence?
For a Florence quote, start with the address or map pin, then tell us what will go underground, such as water or fiber near Patterson Avenue. Add the pipe or conduit size and estimated footage; a sketch or plans help show whether the route approaches FM 487 or South Salado Creek. That gives us a basis to review the route and access.
A short, direct service route near Patterson Avenue with easy access is simpler to plan than a bore that reaches FM 487 or South Salado Creek. Length, pipe or conduit size, Fairlie clay and shallow limestone all affect the work. We also account for marked utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. Florence’s 369 road miles from Yukon affect mobilization, while high profile or emergency work can add planning demands.
Questions people ask about boring in Florence
Does Trinity Boring Solutions take jobs in Florence, Williamson County, and who staffs them?
Yes. We take directional boring work in Florence and across Williamson County. The job is handled by our own crews or crews working from satellite yards operated by partner drilling contractors we have vetted. You coordinate with Trinity from the first call through the bore log, including when a crew is on site near FM 487.
Does Fairlie soil in Florence create a corrosion concern, and what pipe can be used?
Florence’s mapped soils carry high steel corrosion risk, including areas with Fairlie clay. The line owner chooses the material and any coating for steel casing or tracer wire. HDPE is not subject to the mapped steel corrosion concern, but the right pipe depends on the line design and what the owner specifies for a route near Patterson Avenue.
What ground will a directional bore pass through in Florence’s Fairlie soil?
Florence is mapped with Fairlie, Doss and Denton soils, mostly clay and silty clay at the surface. At about 40 inches, the USDA soil survey maps bedrock across 53% of the area and clay across 47%. Sticky clay can load the reamer, while the shallow rock can slow drilling or call for rock tooling.
How much rock is mapped within five feet in Florence, and is it hard or weathered?
The USDA soil survey maps bedrock within 60 inches across 94% of Florence. Within that depth, hard bedrock is mapped across 31% and weathered bedrock across 62%. The Edwards and Comanche Peak Limestones, undivided, are mapped locally, so a bore may meet rock even where the soil surface begins as clay.
Who approves a bore under FM 487 in Florence, and which TxDOT office reviews it?
FM 487 is a state highway, so the utility owner submits the utility permit application through TxDOT’s RULIS system. The TxDOT Austin District reviews it. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner; highway pavement is bored or tunneled beneath.
Can a utility line be bored beneath South Salado Creek in Florence?
A bore beneath South Salado Creek can be planned, with the route designed to stay under the channel. The creek runs 1.04 channel miles through Florence, so access and depth matter. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction before the route is set.
Does Trinity cover Briggs and rural sites outside Florence?
Yes. We take work in Florence, toward Briggs 8.4 miles northwest, and at rural sites outside the city limits. A route beyond town can add footage and mobilization planning, so a map pin or address helps us assess the work in relation to FM 487 and the other nearby roads.
How far ahead should I call Texas811 for a bore near Patterson Avenue in Florence?
Plan the Texas811 request at least 48 hours before excavation, counting back across working days and excluding Saturdays, Sundays and legal holidays. It cannot be filed earlier than 14 days before work. If the start moves more than 14 days beyond the original notice, make a new request; worn or moved marks near Patterson Avenue must be refreshed before work continues.
What affects directional boring costs for an FM 487 crossing in Florence?
The price depends on the route and scope. A short service bore is different from a crossing under FM 487 or South Salado Creek, where pavement or creek conditions affect planning. Length, pipe size, Fairlie clay, shallow limestone, utilities to expose, pits and excavator time all matter. Florence’s 369 road miles from Yukon also affect mobilization.
Where the Florence facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Florence
- U.S. Census Bureau, TIGER/Line 2024: Florence boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Florence
- U.S. Census Bureau, American Community Survey 2019 to 2023: Florence housing units and year built
- Macrostrat geologic map compilation: map units under Florence
- U.S. EPA Safe Drinking Water Information System: public water systems serving Florence
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Williamson County
- U.S. Geological Survey, Elevation Point Query Service: Florence elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Florence
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Florence
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Florence, Texas
Type the address of your job in Florence. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Florence
Same county: Round Rock · Georgetown · Leander · Cedar Park · Austin · Hutto · Brushy Creek · Taylor · Liberty Hill · Granger · Bartlett · Thrall. All counties: Texas county list.
