trinityboringsolutions.com

Burnet Texas Directional Boring: Eckrant Soil, US 281 and Austin Western Railroad

Quick Answer: Water Street, Main Street and Polk Street shape Burnet’s 85.34 public road miles, where we use directional boring, also called horizontal directional drilling (HDD), to route lines beneath US 281. From our Yukon, Oklahoma main office, Burnet is 382 road miles away, so distance is part of planning a job near Hamilton Creek. Eckrant soil and shallow bedrock are key ground conditions. With bedrock mapped within 40 inches across 80 percent of the city, a bore may need rock tooling and careful steering.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Burnet bores at a glance

  • County seat of Burnet County, Texas. Population 6,869 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 382 miles, about 7.8 hours of driving.
  • Ground: Eckrant soil is mapped on 27 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 80 percent of the area.
  • Highways inside the boundary: US 281, Texas State Highway 29, RM 963, RM 2341 and FM 3509. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Austin Western Railroad, with 8 mapped street and rail crossings.
  • Named streams inside the boundary: Hamilton Creek, Daugherty Branch, Delaware Creek and Haynie Branch.
  • Public water: City of Burnet, surface water.
  • Electric: City of Burnet municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Burnet’s Water Street?

Water Street, Main Street and Polk Street are among Burnet’s longest streets; the city has 85.34 public road miles, with US 281 and Hamilton Creek among its mapped routes and features. We take directional boring work in Burnet County, where the Census Bureau Vintage 2024 estimate puts the population at 6,869. Water, sewer, gas, electric conduit and fiber can be routed beneath streets or toward properties along those roads.

Our main office is in Yukon, Oklahoma, and Burnet work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have drilled directionally since 1982. For a Burnet job near US 281, our equipment range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect when drilling in Burnet’s Eckrant soil?

The USDA soil survey maps Eckrant soil across 27 percent of Burnet, including the Eckrant Rock outcrop association on 1 to 10 percent slopes. At about 40 inches below the surface, bedrock is the mapped texture across 80 percent of the area; clay loam accounts for 24 percent and very cobbly clay for 27 percent at the surface. The survey reports an average clay content of 38 percent at 40 inches and maps no sandy area at that depth. These are mapped patterns, not site borings, so the route still needs field checks.

USDA soil survey, inside the Burnet city limitsWhat is mapped
Soil series mappedEckrant 27 percent, Brackett 15 percent, Hensley 14 percent, Bolar 10 percent and Doss 8 percent
Texture at the surfacevery cobbly clay 27 percent, clay loam 24 percent and gravelly loam 14 percent
Texture about 40 inches downbedrock 80 percent, silty clay loam 5 percent and clay 5 percent
Engineering class about 40 inches downlean clay (CL) 13 percent and fat clay (CH) 5 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches80 percent of the area (54 percent hard rock, 26 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel61 percent of the area

Bedrock is mapped within 60 inches across 80 percent of Burnet; the mapped share is 54 percent hard bedrock and 26 percent weathered bedrock. The USDA soil survey maps no seasonal water table within 60 inches, while 5 percent is mapped as flood prone. High steel corrosion risk covers 61 percent, a concern for uncoated steel casing or tracer wire; the line owner selects any coating, while HDPE avoids that soil corrosion concern. The geologic map names the San Saba Member, Furongian dolomite and limestone, so contact with rock can slow drilling or push the head off line.

How do we bore Burnet’s bedrock and cobbly ground?

Eckrant soil and shallow mapped bedrock call for a bore plan that fits the route, not just the street name. Near US 281 or Hamilton Creek, we check the planned path and ground conditions before choosing tooling and fluid.

  1. At Eckrant soil locations with clay loam, we manage fluid and ream in stages so sticky cuttings do not build up on the reamer or grip the pipe.
  2. Where Burnet’s bedrock is shallow, we select rock tooling when the ground requires it and check depth and pitch at each rod to hold the planned line.
  3. Near Hamilton Creek, we plan depth beneath the channel and watch fluid returns so drilling pressure does not lift nearby pavement.
  4. Along Water Street, we use a walkover locator to track the drill head, log depth and pitch, and hydrovac marked utilities before approaching them.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a Burnet line go under US 281?

US 281 runs for 2.3 mapped roadway miles inside Burnet, alongside Texas State Highway 29, RM 963, RM 2341 and FM 3509. No additional highways are mapped within 1.5 miles outside the city limits. Water Street is the longest named street at 4.46 miles, followed by Main Street at 1.9 miles and Polk Street at 1.65 miles. A bore beneath one of these roads can keep pavement intact, but the route and access points need to fit the road crossing and nearby utilities.

CrossingTypeMapped extentWho has a say
US 281US highway2.3 roadway miles insideState highway office
Texas State Highway 29State highway7.3 roadway miles insideState highway office
RM 963State highway1.7 roadway miles insideState highway office
RM 2341State highway1 roadway miles insideState highway office
FM 3509State highway0.1 roadway miles insideState highway office
Austin Western RailroadRailroad3.52 track miles insideThe railroad
Hamilton CreekStream4.16 channel miles insideChecked for Corps of Engineers jurisdiction
Daugherty BranchStream2.01 channel miles insideChecked for Corps of Engineers jurisdiction
Delaware CreekStream1.45 channel miles insideChecked for Corps of Engineers jurisdiction
Haynie BranchStream1.23 channel miles insideChecked for Corps of Engineers jurisdiction
Honey CreekStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Hickey BranchStream0.31 channel miles insideChecked for Corps of Engineers jurisdiction
South Fork San Gabriel RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Spring CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Austin Western Railroad has 3.52 track miles inside Burnet, and public records map 8 street and rail crossings. Hamilton Creek runs 4.16 channel miles in the city; Daugherty Branch and Delaware Creek are also mapped, and 31 street crossings of named streams appear in the city. No lakes or ponds are mapped within one mile. At a creek such as Hamilton Creek, we plan the bore beneath the channel and check for federal waterway jurisdiction during planning.

Whose approval does a Burnet crossing of Austin Western Railroad need?

Burnet is incorporated, so its city streets belong to the city itself. Work in the right of way of US 281, Texas State Highway 29, RM 963, RM 2341 or FM 3509 needs a TxDOT utility permit, reviewed by the Austin District. The utility owner files through RULIS, and we prepare the bore plan and profile for that filing. Cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches; the permit may set another depth. A crossing of the Austin Western Railroad needs an agreement from the railroad that sets casing, depth and flagging. Hamilton Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Burnet County?

The City of Burnet owns its public water system, which uses surface water and serves 7,011 people through 2,908 service connections. The city also owns the City of Burnet municipal electric system, with 3,261 customers reported to EIA. Before a conduit bore near Water Street or another route, we hydrovac pothole marked utilities so their depth is known, not just the position shown by locate paint.

Line ownerWhat it isSourceSize
City of BurnetPublic water systemSurface water2,908 connections, 7,011 people served
City of Burnet municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration3,261 customers reported
Oncor Electric Delivery Company and Pedernales Electric CooperativeElectric utilities reporting service in Burnet CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Burnet’s median housing year at 1980; 17 percent of homes were built before 1960, and 32 percent in 2000 or later. That mix can mean a bore serves a replacement line near Main Street or a new service on a newer property. We expose each marked utility along the planned path before drilling near it, because paint does not show depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do we cover Burnet, Meadowlakes and nearby places?

Burnet is the county seat of Burnet County, at an elevation of 1,339 feet, and covers 10.49 square miles. ZIP code 78611 serves the city. Bertram is 10.5 miles east; Meadowlakes is 13.3 miles south, Marble Falls is 13.4 miles south, Buchanan Dam is 13.5 miles west and Granite Shoals is 13.6 miles southwest. Leander, the nearest larger city, is 25.5 miles southeast. Our Yukon, Oklahoma yard is 382 road miles away, about a 7.8 hour drive, which can affect mobilization for work near US 281.

Places near Burnet

What boring work could come up near Burnet’s Polk Street?

  • Highway crossing: A bore beneath US 281 can carry water or conduit under the roadway without cutting the pavement.
  • Water service: A connection to the City of Burnet water system can run beneath Water Street, with marked lines exposed along the route.
  • Creek crossing: A route beneath Hamilton Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A utility route under the Austin Western Railroad requires coordination around the track and its crossing agreement.
  • Fiber route: Conduit along Main Street can carry fiber beneath pavement while keeping the street surface uncut.
  • Park service: A water or electric conduit bore near Tommy White Park can avoid opening the surface along the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to price a Burnet bore near League Street?

For a bore near League Street, start with the address or map pin, then tell us what goes in the ground. Give the pipe or conduit size and estimated footage. A sketch or plans help show where the route meets the street, utilities or a creek, such as Hamilton Creek.

A simple route on a clear stretch near League Street is easier to plan than a crossing with several obstacles. Price reflects length, pipe size, soil and rock, utilities to cross and expose, pavement, creek crossings, pits, excavator time and sand backfill. Eckrant soil and shallow bedrock can affect tooling and reaming; a US 281 or Austin Western Railroad crossing adds coordination. The 382 road miles from Yukon also affect mobilization, and high profile or emergency work changes the scope.

Questions people ask about boring in Burnet

Does Trinity take directional boring jobs in Burnet County, and who does the work?

Yes. We take directional boring work in Burnet County, and our own crews or crews from partner drilling contractors we have vetted carry it out. You work with Trinity from the first call through the bore log, including on a route near Water Street. Our main office is in Yukon, Oklahoma.

Who controls Polk Street in Burnet, and does a bore have to cut it?

Burnet is an incorporated city, so city streets such as Polk Street belong to the city. Directional boring can place a line under pavement rather than opening a trench across it. The route, access pits and any applicable right of way approval still need to be planned for the specific crossing.

How do Burnet’s older homes near Main Street affect replacement bores?

Burnet’s median housing year is 1980, according to the American Community Survey 2019 to 2023 five year estimates. With 17 percent of homes built before 1960, a Main Street area project may involve replacing an older service or utility route. We expose marked lines before drilling near them and confirm their depth in the field.

Does Eckrant soil in Burnet corrode steel, and what pipe can a bore use?

The USDA soil survey maps high steel corrosion risk across 61 percent of Burnet, including areas mapped as Eckrant soil. That matters for uncoated steel casing or tracer wire. HDPE avoids that soil corrosion concern, while the line owner selects any coating for steel components based on the project.

What ground does a bore meet in Burnet’s Eckrant soil?

The USDA soil survey maps Eckrant soil across 27 percent of Burnet. At about 40 inches, bedrock is the mapped texture across 80 percent of the area; clay loam is the most common listed texture at that depth besides bedrock. These are mapped soil patterns, so the actual route needs to be checked before drilling.

How much bedrock is mapped within five feet of the surface in Burnet?

The USDA soil survey maps bedrock within 60 inches across 80 percent of Burnet. Hard bedrock accounts for 54 percent of the area and weathered bedrock for 26 percent. That points to possible rock drilling and slower progress, but a mapped pattern is not a test of the exact bore path.

How far is Burnet from Yukon, and does Leander affect a bore job?

Burnet is 382 road miles from our Yukon, Oklahoma main office, about a 7.8 hour drive. Leander is the nearest larger city, 25.5 miles southeast of Burnet. The Yukon distance can affect mobilization, so the route, equipment and scope near US 281 help shape job planning.

How much Texas811 notice does a Burnet bore near Water Street need?

For a Water Street start, submit the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. If the start moves more than 14 days past the original notice, make a new request. Marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in Burnet near US 281?

The job scope sets the price: length, pipe or conduit size, ground conditions, utility crossings, pavement, pits and creek crossings all matter. Near US 281, highway coordination can add planning; shallow bedrock may change the tooling, and the 382 road miles from Yukon affect mobilization. We also account for excavator time, backfill and emergency or high profile work.

Where the Burnet facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Burnet

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Burnet, Texas

Type the address of your job in Burnet. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Burnet

Same county: Cottonwood Shores · Horseshoe Bay · Highland Haven · Double Horn · Briggs. All counties: Texas county list.