Novice Texas Directional Boring: Pedernales Soil, FM 702 and BNSF Railway
Quick Answer: FM 702 and the BNSF Railway track are the main mapped obstacles, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Novice, Texas. Novice is 330 road miles from our Yukon, Oklahoma main office, so mobilization matters for a bore near White Avenue. The USDA soil survey maps Pedernales soil across 50 percent of the area, with sandy clay at about 40 inches that can cling to a reamer. That ground calls for staged reaming and a same day pipe pull once the hole is ready.
Novice bores at a glance
- Incorporated city in Coleman County, Texas. Population 124 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 330 miles, about 6.5 hours of driving.
- Ground: Pedernales soil is mapped on 50 percent of the area, with sandy clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 702. State permit office: TxDOT Brownwood District.
- Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near White Avenue in Novice?
Novice is in Coleman County, and the Census Bureau Vintage 2024 estimate puts its population at 124. We install water, sewer, gas, electric conduit and fiber along routes such as White Avenue and Commercial Avenue, setting the bore around the actual service path rather than assuming townwide coverage. In a small city, the address and tie in point matter to the route.
Our main office is in Yukon, Oklahoma, and Novice work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982. With AEP Texas North, Oncor Electric Delivery Company and Taylor Electric Cooperative reporting service in Coleman County, our record of no utility strike in over 25 years matters when planning a conduit route near White Avenue.

What kind of ground does Novice have around Pedernales soil?
The USDA soil survey maps Pedernales soil across 50 percent of Novice, with Rowena at 26 percent and Menard at 24 percent. Fine sandy loam is the mapped surface texture across 61 percent of the area, while clay loam accounts for 26 percent and loamy fine sand 14 percent. At about 40 inches below the surface, sandy clay is mapped under 50 percent of the area, and 76 percent is mapped as heavy clay. These are mapped patterns, not test borings. Sticky clay can build on a reamer and grip pipe, so the ground profile matters to the pull plan.
| USDA soil survey, inside the Novice city limits | What is mapped |
|---|---|
| Soil series mapped | Pedernales 50 percent, Rowena 26 percent and Menard 24 percent |
| Texture at the surface | fine sandy loam 61 percent, clay loam 26 percent and loamy fine sand 14 percent |
| Texture about 40 inches down | sandy clay 50 percent, silty clay loam 26 percent and sandy clay loam 24 percent |
| Engineering class about 40 inches down | clayey sand (SC) 50 percent and lean clay (CL) 50 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 26 percent of the area |
USDA mapping does not place bedrock within the top five feet of Novice, but that does not rule out deeper rock. Seasonal water tables and flood prone soils are not mapped. High steel corrosion risk is mapped under 26 percent of the area, so the line owner should address casing and tracer wire materials. The Quaternary map unit Quartz Sandstone-Clast Sandy Colluvium includes sand and sandstone rubble, while Early Cretaceous Antlers Sand includes sand, clay and conglomerate. Those map units can vary locally, so the drill plan needs room for changing material.
How do we drill Novice’s sandy clay?
The USDA map puts sandy clay and heavy clay below parts of Novice. We match fluid, reaming and pull timing to the ground at the bore path, then track the head and log depth and pitch.
- At a Pedernales soil route, we use a thinner fluid blend and polymer to limit clay buildup, then ream in stages so the hole does not bind the pipe.
- Where the USDA map shows sandy clay at about 40 inches, we watch returns and pressure closely, especially if a bore passes beneath pavement on FM 702.
- We expose marked lines with hydrovac potholing near White Avenue before the drill approaches; the locator paint gives position but does not show buried depth.
- Once the final ream is ready in Novice’s clay, we keep the pipe laid out and pull it the same day, tracking depth and pitch from the surface.

What does a bore have to cross in Novice near FM 702?
FM 702 runs for 0.5 mapped roadway miles inside Novice, and US 84 is 1.1 miles beyond the city limits. Those routes can bring state right of way and pavement constraints into a bore plan. White Avenue is the longest named street at 0.78 miles, followed by Commercial Avenue at 0.76 miles and 4th Street at 0.56 miles. A route on any of these streets needs potholes at marked utilities and pits placed where the work area allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 702 | State highway | 0.5 roadway miles inside | State highway office |
| US 84 | Highway nearby | 1.1 miles outside | State highway office |
| BNSF Railway | Railroad | 1.56 track miles inside | The railroad |
BNSF Railway has 1.56 track miles inside Novice, and public mapping shows five street and rail crossings in the city. A rail bore needs the railroad’s crossing agreement before its casing, depth and flagging details can be set. No named streams or lakes are mapped in or within one mile of Novice; an unnamed drainage totals 0.11 miles inside the city. That drainage still needs to be considered when selecting a bore path.
Who has to sign off on Novice crossings at BNSF Railway?
FM 702 belongs to the state highway system, so work in its right of way needs a TxDOT utility permit reviewed by the Brownwood District. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the utility owner’s permit. BNSF Railway must agree to a crossing of its 1.56 track miles in Novice. City streets such as 4th Street belong to the city because Novice is incorporated. No named creek crossing is mapped, so a water crossing review is not indicated by the local map.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns utility lines in Novice and Coleman County?
The provider serving a specific Novice address cannot be matched from the available EPA drinking water records. Confirm the water provider for the address with the city, Coleman County or the local water district before planning a bore. AEP Texas North, Oncor Electric Delivery Company and Taylor Electric Cooperative report electric service in Coleman County, but the owner of the line along a proposed route must be confirmed before an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Oncor Electric Delivery Company and Taylor Electric Cooperative | Electric utilities reporting service in Coleman County | EIA Form 861 | Confirm the line owner by address |
Housing data is not published reliably for a place as small as Novice, so the age of lines near Commercial Avenue cannot be inferred from a townwide housing estimate. A service route may run along a street or cover a longer distance between properties. Coleman County averages 27.5 inches of precipitation a year, with May the wettest month at 3.8 inches, so the timing can affect access and pits. We hydrovac pothole each marked utility on the planned path before drilling near it; paint shows position, not depth.

What is near Novice and Abilene for a drilling job?
Novice is an incorporated city in Coleman County, at an elevation of 1,980 feet and covering 0.48 square miles. Its ZIP code is 79538. Lawn is 12.6 miles northwest, Coleman is 16.1 miles southeast, Valera is 16.7 miles south, Tuscola is 18.5 miles northwest and Winters is 19.8 miles west. Coleman, the county seat, is 16.1 miles southeast; Abilene is 33.0 miles north. The Yukon yard is 330 road miles away, a 6.5 hour drive, so distance is part of planning a Novice mobilization.
Places near Novice
- Directional boring in Lawn: 12.6 miles northwest
- Directional boring in Coleman: 16.1 miles southeast
- Directional boring in Valera: 16.7 miles south
- Directional boring in Tuscola: 18.5 miles northwest
- Directional boring in Winters: 19.8 miles west
- Directional boring in Abilene: 33 miles north
Which jobs call for a bore near Commercial Avenue in Novice?
- Highway crossing: A bore under FM 702 keeps the road surface intact while the utility owner secures the state right of way permit.
- Rail crossing: A route beneath BNSF Railway needs the railroad’s agreement for casing, depth and flagging before the crew sets the crossing plan.
- Water service: A service route near White Avenue starts with confirming the address water provider and locating marked lines along the path.
- Fiber conduit: A conduit run along Commercial Avenue can be bored between pits to avoid opening the street pavement.
- Street connection: A bore near 4th Street can pass below the surface while hydrovac potholes identify marked utilities along its route.
- Drainage crossing: A route near Novice’s mapped unnamed drainage needs a path that accounts for the channel and the available pit locations.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Parker Avenue in Novice?
A map pin or address near Parker Avenue shows where the route meets the street and whether it approaches FM 702 or BNSF Railway. Include what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see pits, access and marked utility crossings before we set the bore path.
The 330 road miles from Yukon affect mobilization for a Novice job. Pedernales soil and sandy clay can change reaming and pull time, while an FM 702 right of way or BNSF Railway crossing adds permitting and crossing work. Length, pipe size, utilities to expose, pavement, drainage, pit space, excavator time and sand backfill also shape the scope. Emergency or high profile work can require a different plan.
Questions people ask about boring in Novice
Does Trinity take directional boring jobs in Novice and Coleman County, and who staffs them?
Yes. We take directional boring work in Novice, Coleman County, using our own crews or crews from satellite yards operated by drilling contractors we have vetted. You work with Trinity through the bore log even if a partner crew is on site. A route near White Avenue still needs its own locate and bore plan.
Who approves a bore under FM 702 in Novice?
TxDOT reviews work in the FM 702 right of way through its Brownwood District. The utility that owns the line files the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that permit. The right of way limits and the proposed crossing determine the plan details.
What does a Novice bore beneath BNSF Railway require?
A crossing beneath BNSF Railway requires an agreement from the railroad that owns the track. That agreement sets the casing, depth and flagging requirements for the route through Novice. The railway has 1.56 track miles inside the city, so the exact crossing location matters before the bore is designed.
Which electric companies report service in Coleman County, and who confirms conduit specs for Novice?
AEP Texas North, Oncor Electric Delivery Company and Taylor Electric Cooperative report electric service in Coleman County. That does not establish which company owns a line at a particular Novice address. Confirm the owner and conduit specifications with the line owner before planning a bore near Commercial Avenue or another route.
Who controls 4th Street in Novice, and does a bore have to cut it?
Novice is incorporated, so 4th Street is a city street. A directional bore can pass beneath the street without cutting its surface, with entry and exit pits placed off the pavement where the site allows. The route still needs utility locates and any applicable right of way approval.
How old are the houses and buried lines near Commercial Avenue in Novice?
Reliable housing age figures are not published for Novice, so they cannot establish the age of buried lines near Commercial Avenue. For a replacement bore, we use the actual route and expose marked utilities before drilling nearby. A new service and an older line replacement each need their own size and path details.
How early should I call Texas811 for a Novice bore near White Avenue?
For a White Avenue start, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.
How far is Novice from the Yukon office, and does Abilene change the job plan?
Novice is 330 road miles and a 6.5 hour drive from our Yukon, Oklahoma main office. Abilene is 33.0 miles north of Novice, but it does not change the route requirements at the job address. Distance from Yukon can affect mobilization, so the map pin near FM 702 or another feature helps define the work.
What affects the cost of a directional bore near FM 702 in Novice?
The scope sets the cost, not the highway name alone. Length and pipe size matter, as do the sandy clay mapped near Novice, utilities to expose, pavement, pit access and any FM 702 permit work. A BNSF Railway crossing or mobilization from Yukon can add planning and field time. We assess those details from the proposed route.
Where the Novice facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Novice
- U.S. Census Bureau, TIGER/Line 2024: Novice boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Novice
- U.S. Census Bureau, American Community Survey 2019 to 2023: Novice housing units and year built
- Macrostrat geologic map compilation: map units under Novice
- U.S. Department of Transportation, North American Rail Network: track owners in Coleman County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Coleman County
- U.S. Geological Survey, Elevation Point Query Service: Novice elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Novice
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Novice
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Novice, Texas
Type the address of your job in Novice. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Novice
Same county: Santa Anna. All counties: Texas county list.
