trinityboringsolutions.com

Valera Texas Directional Boring: Tarrant Soil, US 67 And Texas Pacifico

Quick Answer: US 67 is the main highway crossing concern, and we take directional boring, also called horizontal directional drilling (HDD), work in Valera, Texas for routes that need to pass beneath it. Valera is 357 road miles from our Yukon, Oklahoma main office, so a job near 3rd Street needs mobilization planned around that distance. Tarrant soil is very cobbly clay, and mapped bedrock near the surface can slow the bore and call for careful steering. Home Creek is another local feature to check when a route approaches the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Valera bores at a glance

  • Unincorporated community in Coleman County, Texas. Population 94 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 357 miles, about 7.1 hours of driving.
  • Ground: Tarrant soil is mapped on 68 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 74 percent of the area.
  • Highways inside the boundary: US 67 and FM 503. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: Texas Pacifico, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Home Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near 3rd Street in Valera?

We take directional boring work in Valera, an unincorporated community in Coleman County with no city government. The Census Bureau counted 94 people there in the 2020 Census; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines along routes such as 3rd Street or beneath US 67, with the bore path set for the specific service.

Our main office is in Yukon, Oklahoma, and Valera work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Valera projects, our family business dates to 1965, and we have done directional boring since 1982. For Valera routes, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Tarrant soil like to bore in Valera?

The USDA soil survey maps Tarrant and Purves soils across 68 percent of Valera, with Rowena clay loam on 25 percent and Kavett silty clay on 7 percent. The Tarrant map unit has very cobbly clay at the surface. About 40 inches down, bedrock is mapped across 74 percent of the area, while silty clay loam is mapped across 25 percent. The survey maps no sandy area at that depth. Clay can cling to the reamer and grip pipe, so the crew may need staged reaming and a thinner drilling fluid.

USDA soil survey, inside the Valera mapped community boundaryWhat is mapped
Soil series mappedTarrant 68 percent, Rowena 25 percent and Kavett 7 percent
Texture at the surfacevery cobbly clay 68 percent, clay loam 26 percent and silty clay 7 percent
Texture about 40 inches downbedrock 74 percent and silty clay loam 25 percent
Engineering class about 40 inches downlean clay (CL) 26 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches74 percent of the area (74 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps bedrock within five feet across 74 percent of Valera, and maps hard bedrock in that same share; weathered bedrock is not mapped there. For Valera, we treat seasonal water table conditions and flood prone soils as unmapped when planning underground work. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials or coatings. The geologic map names the Jagger Bend and Valera Formations, undivided, of Kungurian age, with shale, mudstone, limestone and sandstone. Rock can slow the bore and the soil to rock contact can push the drill head off line.

How do we bore through Valera bedrock and soil?

In Valera, the Tarrant soil and shallow mapped bedrock set the pace. We check the route, expose marked lines, then drill and track the head before pulling the pipe through.

  1. At a Valera address with Tarrant soil, we use fluid and staged reaming to manage sticky clay, then pull the pipe while the bore is ready.
  2. Where bedrock is mapped near the surface in Valera, we monitor steering through the soil to rock contact and allow for slower drilling.
  3. Before drilling near US 67 or 3rd Street, we hydrovac marked utilities on the bore path because paint shows position but not depth.
  4. At Home Creek, we plan the bore beneath the channel and check jurisdiction during planning; pits stay on the dirt side of the crossing.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Valera bore cross near US 67?

US 67 and FM 503 run inside Valera’s mapped community boundary, with 0.4 roadway miles of US 67 and 0.6 miles of FM 503 mapped there. A route may also need to pass beneath 3rd Street, 2nd Street or Bledsoe Avenue, the longest named streets in the community. Main Street is another route to locate before planning a service. Boring beneath pavement leaves the road surface uncut, while the entry and exit pits sit in dirt beyond the crossing.

CrossingTypeMapped extentWho has a say
US 67US highway0.4 roadway miles insideState highway office
FM 503State highway0.6 roadway miles insideState highway office
Texas PacificoRailroad0.45 track miles insideThe railroad
Home CreekStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Bead Mountain CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Texas Pacifico has 0.45 track miles inside Valera, and one street and rail crossing is mapped in the community. A rail bore needs an agreement with the railroad that owns the track; its terms set casing, depth and flagging. Home Creek runs 0.03 channel miles inside the boundary, and one street crossing of a named stream is mapped. We have no lakes or ponds mapped within one mile of Valera, which informs how we assess possible crossing routes. A creek route needs channel planning and a check for federal jurisdiction.

Whose permission does a Valera bore in Coleman County need?

Valera has no city government, so a route along 3rd Street or 2nd Street is not permitted by a city department; the county or state has authority over the road involved. US 67 and FM 503 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Brownwood District. The utility owner, not our drilling crew, files through TxDOT’s RULIS system. We prepare the bore plan and profile for work under the permit issued to that owner. A Texas Pacifico track crossing needs an agreement from the railroad, and TxDOT asks for a copy if the line also occupies highway right of way. A Home Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines may already be in the ground in Coleman County near Valera?

The water provider for a specific Valera address has to be confirmed with the county or the local water district before a bore is planned; EPA drinking water records do not tie a system to this community. A city department may not be the contact because Valera has no city government. AEP Texas North, Oncor Electric Delivery Company and Taylor Electric Cooperative report service in Coleman County, but the electric line owner for the bore route must be confirmed before a conduit crossing. We hydrovac pothole marked lines before drilling near them, including around a water service or electric conduit along US 67.

Line ownerWhat it isSourceSize
AEP Texas North, Oncor Electric Delivery Company and Taylor Electric CooperativeElectric utilities reporting service in Coleman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing data are not published for a place as small as Valera, so the address and route matter more than a townwide age estimate. A longer service run may follow 3rd Street or connect from US 67, and May averages 3.8 inches of rain while January averages 1.2 inches. Before the drill approaches a marked utility, we expose it by hydrovac; locate paint gives its position, not its depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Valera from Coleman and the Yukon yard?

Valera is in Coleman County at an elevation of 1,820 feet and covers 0.22 square miles of mapped community area. We identify Valera by ZIP codes 76884 and 76882 when checking underground work locations. Coleman, the county seat, is 9.2 miles northeast; Santa Anna is 13.2 miles east, Novice is 16.7 miles north and Ballinger is 23.9 miles west. Brownwood, the nearest larger city, is 33.7 miles east. Our Yukon, Oklahoma main office is 357 road miles away, a 7.1 hour drive, which affects mobilization for work near FM 503 or Home Creek.

Places near Valera

What kinds of bores come up near 2nd Street in Valera?

  • Highway crossing: A bore beneath US 67 avoids cutting through the existing highway pavement and is planned to meet the TxDOT permit.
  • Street service: A water or sewer line can follow a route near 2nd Street, with marked utilities exposed before drilling.
  • Fiber conduit: A conduit route along 3rd Street can be bored beneath pavement, with the line owner confirmed before an electric crossing.
  • Rail crossing: A route beneath Texas Pacifico track needs the railroad agreement that sets casing, depth and flagging.
  • Creek crossing: A bore near Home Creek is planned below the channel, with jurisdiction checked during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Valera bore near Main Street?

Start with an address or map pin, because a spot near Main Street differs from a route beside Home Creek or beneath US 67. Tell us what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit points, pavement and marked crossings before we scope the bore.

The price follows the work at the Valera site. Ground conditions matter: Tarrant soil and mapped bedrock can change the tooling and reaming plan. Crossings matter too, including US 67, Texas Pacifico track and any utility exposures. Logistics also count because Valera is 357 road miles from Yukon. Concrete or pavement, creek drainage, pits, excavator time, sand backfill, emergency timing and the pipe or conduit size all affect the job plan.

Questions people ask about boring in Valera

Does Trinity take directional boring jobs in Valera, Coleman County, and how are crews assigned?

Yes. We take directional boring work in Valera, and the job is handled through our Yukon main office. Our own crews or crews from satellite yards run by drilling contractors we have vetted may perform the work. The customer deals with Trinity from the first call through the bore log, including for a route near US 67.

Does Tarrant soil around Valera corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across Valera, including areas with Tarrant soil. For a Valera crossing, we leave coating selection for steel casing or tracer wire to the line owner. On Valera jobs, we rely on the fact that HDPE is not affected by that soil corrosion concern. We confirm the planned material and route before a bore near 3rd Street or US 67.

What ground does a bore pass through in Valera’s Tarrant soil?

Tarrant and Purves soils are mapped across 68 percent of Valera, and very cobbly clay is the mapped surface texture for that unit. About 40 inches down, bedrock is mapped across 74 percent of the area and silty clay loam across 25 percent. Those are USDA soil survey patterns, not test borings, so the exact route still needs job planning.

Will a Valera bore hit rock, and how much of the area has it within five feet?

The USDA soil survey maps bedrock within five feet across 74 percent of Valera, and maps hard bedrock in that share. Weathered bedrock is not mapped there. A bore near FM 503 may encounter rock that slows drilling, especially where the head moves from soil into rock.

Who approves a bore under US 67 in Valera?

TxDOT reviews a utility permit for work in the US 67 right of way through its Brownwood District. The utility owner files in TxDOT’s RULIS system, while we prepare the bore plan and profile for the permit. A route crossing FM 503 is handled under the same state highway process.

What does a bore under Texas Pacifico in Valera require?

A Texas Pacifico crossing needs an agreement with the railroad that owns the track. The agreement sets the casing, depth and flagging requirements for that crossing. There are 0.45 track miles mapped inside Valera, so the specific track location and proposed bore route need to be identified before planning.

How far is Valera from the Yukon office, and does Brownwood help with mobilization?

Valera is 357 road miles and a 7.1 hour drive from our Yukon, Oklahoma main office. Brownwood is 33.7 miles east of Valera, but the job’s access and crew plan determine mobilization. We account for that travel along with the route near a local feature such as US 67.

How early should I call Texas811 for a bore near 3rd Street in Valera?

For a bore near 3rd Street, place the Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays. Do not request it earlier than 14 days before the start. For Valera work, if the start slips more than 14 days past the original notice, we make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 67 in Valera?

For directional boring in Valera, we set the price according to the job scope. Tarrant soil and mapped bedrock can affect drilling time; a US 67 or Texas Pacifico crossing adds planning and permit or agreement needs. The pipe size and bore length, utility exposures, pavement, creek drainage, pits, excavator time and distance from Yukon also affect the work. We assess those details for the proposed route.

Where the Valera facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Valera

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Valera, Texas

Type the address of your job in Valera. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Valera

All counties: Texas county list.