trinityboringsolutions.com

Hillcrest Village Texas Directional Boring: Bernard Clay, Mustang Bayou and Texas State Highway 35

Quick Answer: The City of Hillcrest Village owns the groundwater well system, while CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report service in Brazoria County; confirming the line owner matters before a conduit bore. We do directional boring, also called horizontal directional drilling (HDD), for routes near Mustang Bayou. Hillcrest Village is 487 road miles from our Yukon main office, with Riverside Drive among the streets a route may follow. Bernard clay loam dominates the mapped soils, so sticky clay calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hillcrest Village bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 695 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 487 miles, about 9.6 hours of driving.
  • Ground: Bernard soil is mapped on 67 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: Texas State Highway 35, Texas State Highway 35 Business and Texas State Highway 6.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mustang Bayou.
  • Public water: City of Hillcrest Village, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Mustang Bayou in Hillcrest Village?

The City of Hillcrest Village owns the public groundwater system, and electric service providers reporting in Brazoria County include CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative. The line owner needs to be identified before a conduit bore is planned. The Census Bureau Vintage 2024 estimate puts Hillcrest Village at 695 residents. We install water, sewer, gas, electric conduit and fiber along routes such as Main Street or near Mustang Bayou.

Our main office is in Yukon, Oklahoma, and Hillcrest Village work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have done directional boring since 1982, giving us four decades of work to draw on for the sticky Bernard clay mapped here. Our family business started in 1965, and we stay involved from the first call through the bore log, whichever crew is on site.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bernard soil like to bore through in Hillcrest Village?

The USDA soil survey maps Bernard soil across 67% of Hillcrest Village. The mapped units include Bernard clay loam on 42% of the area and Bernard Edna complex on 24%. Surface texture is clay loam on 67% and clay on 18%, with fine sandy loam on 10%. At about 40 inches below the surface, the survey maps clay throughout the city and an average clay content of 51%. Across Bernard and Lake Charles soil areas, we treat mapped patterns as planning context, not as test borings for Hillcrest Village work. The sticky clay can gather on a reamer and grip pipe, so the bore plan should account for staged reaming and fluid control.

USDA soil survey, inside the Hillcrest Village city limitsWhat is mapped
Soil series mappedBernard 67 percent, Lake Charles 18 percent, Aris 10 percent and Edna 5 percent
Texture at the surfaceclay loam 67 percent, clay 18 percent and fine sandy loam 10 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches82 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in the top five feet of Hillcrest Village, while the geologic map shows Beaumont Formation, areas predominantly sand, of Pleistocene age. That mapped formation includes fine sand and silt as well as clayey fill in abandoned channels, so actual conditions can vary along a bore. The soil survey maps a seasonal water table within 60 inches across 82% of the area, which can put water in pits. At Mustang Bayou, we account for the fact that flood prone soils are not mapped when planning boring work. High steel corrosion risk is mapped across the area; the line owner selects any coating for steel casing or tracer wire, while For Hillcrest Village clay loam surface soil, we specify HDPE because HDPE is not affected by soil corrosion.

How do we bore through clay in Hillcrest Village?

Bernard clay loam covers much of Hillcrest Village, and clay is mapped at about 40 inches. We plan the bore around sticky cuttings, wet pits and the utilities beneath local streets such as Riverside Drive.

  1. In Bernard clay loam, we select fluid and reaming steps to manage sticky cuttings, then have the pipe ready so the open bore does not sit.
  2. Because heavy clay is mapped at about 40 inches throughout Hillcrest Village, we watch returns and pressure so fluid does not lift pavement on Main Street.
  3. The seasonal water table is mapped within 60 inches across 82% of the area, so we plan manageable pits and pumping near Riverside Drive.
  4. Before drilling near the City of Hillcrest Village water lines or electric facilities reported in Brazoria County, we use hydrovac potholing to verify marked utilities.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a bore pass beneath Riverside Drive in Hillcrest Village?

No state highway runs inside Hillcrest Village limits. Texas State Highway 35 is 0.6 miles outside the limits, Texas State Highway 35 Business is 1.0 mile away, and Texas State Highway 6 is 1.3 miles away. Inside town, Riverside Drive has 0.77 miles of public road centerline, Main Street has 0.73 miles, and Crestmont Drive and Timberlane Drive each have 0.44 miles. A route under these streets can be bored to leave the pavement and driveways uncut, with pits set in dirt on either side.

CrossingTypeMapped extentWho has a say
Texas State Highway 35Highway nearby0.6 miles outsideState highway office
Texas State Highway 35 BusinessHighway nearby1 miles outsideState highway office
Texas State Highway 6Highway nearby1.3 miles outsideState highway office
Mustang BayouStream0.88 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hillcrest Village or within 1 mile outside its limits, and no mapped street and rail crossings are recorded in town. Mustang Bayou runs 0.88 channel miles through the city, but no street crossings of the named stream are mapped. A proposed bore under the bayou still needs its route and ground conditions reviewed, including a check for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore near Texas State Highway 35 in Brazoria County and Hillcrest Village?

Texas State Highway 35 lies 0.6 miles outside Hillcrest Village, and TxDOT owns the highway right of way. The TxDOT Houston District reviews utility work there. The utility owner, not our contractor, submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules require boring or tunneling beneath an existing highway. Cover requirements depend on line type, and the district can set a different depth in the permit. Riverside Drive and the other city streets belong to the city. Mustang Bayou crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground in Hillcrest Village, including the City of Hillcrest Village system?

The City of Hillcrest Village public water system uses groundwater wells and serves 813 people through 271 service connections. CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report electric service in Brazoria County, but that does not establish which provider serves a particular address. Before planning a conduit bore near Main Street or Mustang Bayou, we identify the line owner so the correct existing facilities can be located and exposed.

Line ownerWhat it isSourceSize
City of Hillcrest VillagePublic water systemGroundwater wells271 connections, 813 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median year built for Hillcrest Village housing at 1968. It reports 13% built before 1960, 82% from 1960 to 1999, and 5% in 2000 or later. That mix can mean a project involves replacement work as well as new services along streets such as Timberlane Drive. We use hydrovac potholing to expose marked water and electric lines before drilling near them, because locate marks show position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Hillcrest Village and nearby Liverpool?

Hillcrest Village is an incorporated city in Brazoria County, with 0.44 square miles of land and an elevation of 34 feet. Alvin is 2.3 miles north and is the nearest larger city; Liverpool is 7.0 miles southwest, and Santa Fe is 7.3 miles east. Friendswood is 8.1 miles north, while League City is 9.6 miles northeast. Angleton, the county seat, is 19.7 miles southwest. The Yukon yard is 487 road miles away, or a 9.6 hour drive, so that distance is part of planning mobilization for a Riverside Drive or Mustang Bayou project.

Places near Hillcrest Village

What kinds of bores come up near Main Street in Hillcrest Village?

  • Highway crossing: A bore near Texas State Highway 35 needs a route and permit plan coordinated with the TxDOT Houston District.
  • Water service: A connection to the City of Hillcrest Village groundwater system may need a bore beneath a driveway or street such as Main Street.
  • Fiber conduit: A conduit route along Riverside Drive can pass below pavement without an open cut, with pits placed in dirt.
  • Bayou crossing: A proposed line under Mustang Bayou needs a planned profile and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street service: A water, sewer or electric conduit bore near Timberlane Drive needs marked utilities exposed before the drill approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Timberlane Drive in Hillcrest Village?

For a bore near Timberlane Drive, start with the address or a map pin, then tell us what goes in the ground. Give us the pipe or conduit size and the footage. A sketch or plans help show the route, nearby utilities and any driveway or pavement to cross.

A short route through Bernard clay with few exposed utilities may be simpler to plan than a longer crossing near Texas State Highway 35 or Mustang Bayou. Price depends on length, pipe or conduit size, soil, utility crossings, pavement, pits, excavator time and backfill. Creek crossings can add planning needs, and the 487 road miles from Yukon affect mobilization. TxDOT Houston District permitting or high profile and emergency work can change our scope, so we confirm requirements before planning a crossing.

Questions people ask about boring in Hillcrest Village

Does Trinity Boring Solutions take directional boring work in Hillcrest Village, Brazoria County?

Yes. We take directional boring work in Hillcrest Village and staff it with our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is near Main Street or Mustang Bayou.

Does Bernard soil in Hillcrest Village corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across Hillcrest Village, including areas mapped as Bernard clay loam. The line owner chooses coatings for steel casing or tracer wire. For Hillcrest Village clay loam surface soil, we specify HDPE because HDPE is not affected by soil corrosion. The best pipe choice depends on the line and the project, so identify the owner before a bore near Riverside Drive is planned.

What ground does a bore pass through in Hillcrest Village near Bernard soil?

The USDA soil survey maps Bernard soil on 67% of Hillcrest Village, and clay loam is the leading surface texture. At about 40 inches below the surface, clay is mapped throughout the city, with an average clay content of 51%. That sticky material can cling to the reamer, so staged reaming and fluid control matter on a Main Street route.

For a Hillcrest Village bore near Riverside Drive, should we expect rock, or confirm subsurface conditions before setting depth?

Bedrock is not mapped in the top five feet of Hillcrest Village, but that does not rule out deeper rock. The geologic map identifies Beaumont Formation, areas predominantly sand, of Pleistocene age. It describes fine sand, silt and some clayey fill, so a bore near Mustang Bayou still needs a site specific plan.

Who approves a bore under Texas State Highway 35 near Hillcrest Village?

TxDOT reviews work in the Texas State Highway 35 right of way through the TxDOT Houston District. The utility owner submits the RULIS application, while we provide the bore plan and profile and work under the permit issued to the owner. The highway is 0.6 miles outside Hillcrest Village limits.

Can a line be bored under Mustang Bayou in Hillcrest Village?

A bore beneath Mustang Bayou can be considered, but the route needs a site review and a check for U.S. Army Corps of Engineers jurisdiction during planning. The bayou runs 0.88 channel miles within Hillcrest Village. No street crossing of the named stream is mapped, which does not determine whether a particular proposed route is workable.

Does Trinity cover Alvin and rural sites outside Hillcrest Village?

We take work across Texas, including projects around Alvin and sites outside Hillcrest Village limits. Alvin is 2.3 miles north and is the nearest larger city. The Yukon yard is 487 road miles away, so the location and scope help us plan crew mobilization for work near the city or in the surrounding area.

How much 811 notice is needed for a bore on Riverside Drive in Hillcrest Village?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Riverside Drive start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring near Texas State Highway 35 in Hillcrest Village?

The scope sets the price: length, pipe size, Bernard clay, exposed utilities, pavement, pits, backfill and any creek crossing all matter. A route near Texas State Highway 35 may also involve right of way permitting and a bore profile. Mobilization from the Yukon yard is another factor because Hillcrest Village is 487 road miles away.

Where the Hillcrest Village facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hillcrest Village

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hillcrest Village, Texas

Type the address of your job in Hillcrest Village. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hillcrest Village

Same county: Pearland · Lake Jackson · Angleton · Manvel · Iowa Colony · Clute · Freeport · Richwood · West Columbia · Sweeny · Brazoria · Wild Peach Village. All counties: Texas county list.