trinityboringsolutions.com

Comanche Texas Directional Boring: Krum Soil, Horse Creek and US 67

Quick Answer: City of Comanche owns the water system, and county electric providers must be checked before a bore near Horse Creek. We take directional boring, also called horizontal directional drilling (HDD), for lines crossing Central Avenue. Comanche is 316 road miles from Yukon, with US 67 among the routes to assess. Krum silty clay can cling to a reamer, so we stage passes and pull pipe promptly.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Comanche bores at a glance

  • County seat of Comanche County, Texas. Population 4,401 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 316 miles, about 6.4 hours of driving.
  • Ground: Krum soil is mapped on 18 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 34 percent of the area.
  • Highways inside the boundary: US 67, US 377, Texas State Highway 36, Texas State Highway 16 and FM 3381. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 8 mapped street and rail crossings.
  • Named streams inside the boundary: Horse Creek and Inian Creek.
  • Public water: City of Comanche, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Horse Creek in Comanche?

We take directional boring work in Comanche, the Comanche County seat, where the Census Bureau Vintage 2024 estimate puts the population at 4,401. A water line can run beneath Central Avenue, while fiber or electric conduit may need to cross US 67. We install water, sewer, gas, electric conduit and fiber, with the route and line owner confirmed for each job.

Our main office is in Yukon, Oklahoma, and Comanche work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters around the City of Comanche water system and electric lines reported in Comanche County. For Comanche planning, our family business began in 1965, and we have done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Comanche’s Krum soil affect a bore?

The USDA soil survey maps Krum soil across 18 percent of Comanche and Krum silty clay, cool, 1 to 3 percent slopes across 12 percent. Blanket soil accounts for 16 percent of mapped series, while Bolar clay loam covers 9 percent as a map unit. At about 40 inches, clay loam is mapped across 24 percent of the area and silty clay across 18 percent. Clay makes the reamer sticky and can grip pipe, so the crew needs a controlled fluid mix and staged reaming.

USDA soil survey, inside the Comanche city limitsWhat is mapped
Soil series mappedKrum 18 percent, Blanket 16 percent, Bolar 11 percent, Pedernales 9 percent and Purves 7 percent
Texture at the surfacesilty clay 22 percent, loam 21 percent and clay loam 19 percent
Texture about 40 inches downclay loam 24 percent, bedrock 23 percent and silty clay 18 percent
Engineering class about 40 inches downlean clay (CL) 42 percent, fat clay (CH) 19 percent and clayey sand (SC) 14 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches34 percent of the area (22 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel34 percent of the area

The USDA soil survey maps bedrock within 60 inches across 34 percent of Comanche, including hard bedrock across 22 percent and weathered bedrock across 12 percent. A typical mapped depth is 34 inches, so the ground can change from soil to rock during a bore. Seasonal water tables are mapped within 60 inches across 4 percent, and flood prone soils across 3 percent. High steel corrosion risk covers 34 percent, so the line owner selects any casing or tracer wire coating. The mapped alluvial sand, silt, clay, and gravel unit is Holocene; changing layers can affect steering and fluid returns.

How is a bore run through Comanche’s clay loam?

Comanche’s mapped clay loam and silty clay call for steady fluid control and a staged cut. We track the drill head from the surface and log its depth and pitch as the bore follows the planned route near local streets and crossings.

  1. Krum silty clay can cling to the reamer, so we use a thinner fluid mix with polymer and open the hole in stages.
  2. With heavy clay mapped in Comanche, we watch fluid returns near pavement so pressure does not lift a road surface.
  3. Where bedrock appears below the 34 inch typical mapped depth, we adjust the tooling and allow for slower progress through the change in ground.
  4. At Horse Creek, we plan the bore below the channel and check possible U.S. Army Corps of Engineers jurisdiction before setting the route.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What is in the way of a new line in Comanche near the Fort Worth and Western Railroad?

US 67 has 3.3 mapped roadway miles inside Comanche, alongside US 377, Texas State Highway 36 and Texas State Highway 16. FM 3381, FM 2247, FM 1689 and FM 590 also run within the city limits. The longer named streets include Central Avenue at 2.85 miles, Austin Street at 2.35 miles and Highland Avenue at 2.08 miles. A route beneath one of these roads needs a plan that keeps pavement intact and accounts for the road owner.

CrossingTypeMapped extentWho has a say
US 67US highway3.3 roadway miles insideState highway office
US 377US highway3.1 roadway miles insideState highway office
Texas State Highway 36State highway2.9 roadway miles insideState highway office
Texas State Highway 16State highway2.5 roadway miles insideState highway office
FM 3381State highway1.6 roadway miles insideState highway office
FM 2247State highway0.5 roadway miles insideState highway office
FM 1689State highway1 roadway miles insideState highway office
FM 590State highway0.8 roadway miles insideState highway office
Fort Worth and Western RailroadRailroad3.04 track miles insideThe railroad
Horse CreekStream1.03 channel miles insideChecked for Corps of Engineers jurisdiction
Inian CreekStream0.54 channel miles insideChecked for Corps of Engineers jurisdiction
Indian CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Armstrong CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 3.04 track miles in Comanche, and the map shows 8 street and rail crossings. A bore beneath its Dublin Subdivision needs an agreement with the railroad owner, which sets casing, depth and flagging. Horse Creek runs 1.03 channel miles inside the city, and Inian Creek runs 0.54 miles; one street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile, but a creek route still needs planning for channel depth and possible federal jurisdiction.

Who approves a bore on Comanche County roads and highways?

US 67, US 377, Texas State Highway 36, Texas State Highway 16 and the farm to market roads are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Brownwood District. The utility owner files through TxDOT’s online RULIS system; we provide the bore plan and profile and work under that owner’s permit. Because Comanche is incorporated, we treat its city streets as city owned when planning a bore. A crossing under the Fort Worth and Western Railroad also needs the railroad owner’s agreement. Horse Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Comanche near the City of Comanche system?

The City of Comanche public water system serves 4,211 people through 2,367 service connections and uses purchased surface water. That puts water lines in the project picture for streets such as Central Avenue, but the exact route still needs to be located. Electric service providers reporting in Comanche County include Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative Service. Before planning an electric conduit bore near US 67 in Comanche, we confirm the line owner.

Line ownerWhat it isSourceSize
City of ComanchePublic water systemSurface water bought from another system2,367 connections, 4,211 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative ServiceElectric utilities reporting service in Comanche CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Comanche a median housing year of 1969; 41 percent of homes were built before 1960, and 7 percent in 2000 or later. That mix can mean replacement lines around older streets as well as new service runs. Before drilling near a marked line on Oak Avenue, we hydrovac pothole it to expose its depth; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Comanche and Blanket soil?

Comanche is the incorporated county seat of Comanche County, covering 4.56 square miles at an elevation of 1,400 feet. The city is in ZIP code 76442. Proctor is 11.8 miles northeast, Blanket is 12.1 miles southwest, Gustine is 12.4 miles east, De Leon is 15.1 miles north and Priddy is 16.4 miles south. Brownwood, the nearest larger city, is 25.4 miles southwest. The Yukon yard is 316 road miles away, about a 6.4 hour drive, which can affect mobilization for a Comanche job.

Places near Comanche

What boring work comes up on Comanche’s Central Avenue?

  • Highway crossing: A bore beneath US 67 can carry water or conduit without cutting across the highway pavement.
  • Water service: A connection to the City of Comanche system may need a route beneath a Central Avenue driveway or street.
  • Fiber route: Fiber conduit can follow a planned path near US 377 while keeping the road surface intact.
  • Creek crossing: A proposed line beneath Horse Creek needs a profile that stays below the channel and accounts for jurisdiction review.
  • Rail crossing: A line beneath the Fort Worth and Western Railroad requires the track owner’s agreement and its casing and flagging terms.
  • Street utility: A bore near Oak Avenue starts with exposing marked utilities so the drill can pass at a verified depth.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Oak Avenue in Comanche?

A map pin matters near Oak Avenue because a small route shift can change which utilities, pavement or drainage a bore meets. Send the Comanche address or pin, what goes in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the path near Horse Creek or a named road before we build the scope.

The 316 road miles from Yukon are part of mobilization for Comanche, then the ground sets the drilling approach. Krum silty clay can take staged reaming, while mapped bedrock may call for slower progress. Crossing US 67 or the Fort Worth and Western Railroad adds coordination and protection needs. We also account for exposed utilities, pavement, creek crossings, pits, excavator time, sand backfill and whether the work is high profile or an emergency.

Questions people ask about boring in Comanche

Does Trinity Boring Solutions take directional boring jobs in Comanche County?

Yes. We take directional boring work in Comanche County and staff it with our own crews or crews from partner drilling contractors we have vetted. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log. We can plan around routes such as US 67 and the City of Comanche water system.

What ground should I expect for a bore through Krum soil in Comanche?

The USDA soil survey maps Krum soil across 18 percent of Comanche, with clay loam mapped across 24 percent of the area at about 40 inches. Silty clay is also mapped at that depth. Clay can stick to the reamer and grip pipe, so staged reaming and a prompt pull help manage the hole.

Is there bedrock near the surface in Comanche?

Bedrock is mapped within 60 inches across 34 percent of Comanche, with hard bedrock across 22 percent and weathered bedrock across 12 percent. A typical mapped depth is 34 inches. Those map patterns can mean a bore changes from soil to rock, so the drilling setup and pace may need to change.

Who must we contact to approve a bore under US 67 in Comanche?

TxDOT reviews utility work in the US 67 right of way through its Brownwood District. The utility owner applies in TxDOT’s online RULIS system, while we supply the bore plan and profile and work under the issued permit. A line beneath the existing highway is installed by boring or tunneling, not open trenching.

What does a Comanche bore under the Fort Worth and Western Railroad need?

It needs an agreement from the Fort Worth and Western Railroad, which owns 3.04 track miles in Comanche. That agreement sets the casing, depth and flagging conditions for the crossing. If the line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

Can a new line be bored beneath Horse Creek in Comanche?

A bore beneath Horse Creek can be planned, with its profile set below the channel. Horse Creek runs 1.03 channel miles inside Comanche, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped flood prone soil share is 3 percent, so the route still needs site specific review.

How early do I need to call 811 before boring near Central Avenue in Comanche?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead. If Central Avenue work slips more than 14 days past the original start date, make a new request. On Comanche city streets, we refresh worn or moved marks through Texas811 before work continues.

How far is Comanche from Brownwood, and does Yukon affect a boring job?

Brownwood is 25.4 miles southwest of Comanche, while the Yukon yard is 316 road miles away and about a 6.4 hour drive. That distance can affect mobilization for work near US 377 or Horse Creek. The route, ground and crossings still determine what equipment and crew time the job needs.

What affects the cost of directional boring under US 67 in Comanche?

The scope drives the price, including bore length, pipe or conduit size, Krum clay, rock, exposed utilities and pavement. A US 67 crossing can add permit planning, while a Horse Creek route brings channel planning. The 316 road miles from Yukon also affect mobilization, along with pits, excavator time, backfill and emergency or high profile work.

Where the Comanche facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Comanche

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Comanche, Texas

Type the address of your job in Comanche. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Comanche

Same county: Lamkin. All counties: Texas county list.