trinityboringsolutions.com

Lamkin Texas Directional Boring: Pedernales Soil, Texas State Highway 36 and Leon River

Quick Answer: Oncor Electric Delivery reports service in Comanche County, but the water provider for a Lamkin address must be confirmed before planning a bore under Texas State Highway 36. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Lamkin for routes that cross the Leon River. The site is 326 road miles from our Yukon, Oklahoma main office, with Carlton 8.5 miles northeast. Lamkin soil is frequently flooded across 25 percent of the mapped area, so the river route and bore depth need careful planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lamkin bores at a glance

  • Unincorporated community in Comanche County, Texas. Population 46 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 326 miles, about 6.6 hours of driving.
  • Ground: Pedernales soil is mapped on 31 percent of the area, with silt loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: Texas State Highway 36. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Leon River.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring under Texas State Highway 36 in Lamkin?

In Lamkin, Comanche County, the 2020 Census counted 46 people; the Census Bureau does not publish annual estimates for this unincorporated community. We can bore water, sewer, gas, electric conduit and fiber beside Texas State Highway 36 or across the mapped public road network. The route and existing lines determine where the bore can run.

Our main office is in Yukon, Oklahoma, and Lamkin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years, a record that matters when routing new conduit near the lines serving Comanche County.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Lamkin soil like to bore through Pedernales soil?

The USDA soil survey maps Pedernales soils across 31 percent of Lamkin and Lamkin soils, frequently flooded, across 25 percent. Pedernales fine sandy loam is mapped on slopes of 1 to 3 percent and 3 to 5 percent. At about 40 inches below the surface, silt loam accounts for 27 percent of the mapped texture and sandy clay for 21 percent. The average clay share at that depth is 29 percent, and heavy clay is mapped across 40 percent. These are mapped patterns, not test borings, so the actual route still needs to be checked.

USDA soil survey, inside the Lamkin mapped community boundaryWhat is mapped
Soil series mappedPedernales 31 percent, Lamkin 25 percent, Luckenbach 10 percent, Karnes 10 percent and Lewisville 9 percent
Texture at the surfaceclay loam 45 percent, fine sandy loam 43 percent and loam 10 percent
Texture about 40 inches downsilt loam 27 percent, sandy clay 21 percent and clay loam 19 percent
Engineering class about 40 inches downlean clay (CL) 60 percent and clayey sand (SC) 40 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches2 percent of the area (2 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils31 percent of the area
High corrosion risk for uncoated steel10 percent of the area

Bedrock is mapped within 60 inches in 2 percent of Lamkin, but not within 40 inches; that does not rule out rock deeper down. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 31 percent, including along the Leon River. Steel corrosion risk is mapped as high in 10 percent of the area, so the line owner should consider casing and tracer wire materials. The Twin Mountains Formation, of Aptian age, includes sandstone, claystone and conglomerate; that map describes the underlying geology, not the exact material at a bore.

What does it take to bore Lamkin ground with silt loam?

The USDA survey maps clay loam across 45 percent of Lamkin and silt loam at about 40 inches in 27 percent. We adjust fluid and reaming to the ground and keep the bore path clear of marked lines.

  1. Because clay loam covers 45 percent of Lamkin, we use fluid and staged reaming suited to sticky ground, then pull the pipe while the bore remains open.
  2. Silt loam is mapped at about 40 inches in 27 percent of the area; we keep fluid pressure low under pavement so soft ground does not wash out.
  3. With flood prone soils mapped across 31 percent of Lamkin, a Leon River crossing needs a planned depth below the channel and a check for federal jurisdiction.
  4. Before drilling near a marked line beside Texas State Highway 36, we hydrovac pothole to expose it; surface paint gives position, not depth.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Which roads, tracks or creeks does a Lamkin bore meet near Leon River?

Texas State Highway 36 runs for 1.0 mapped roadway mile inside the Lamkin community boundary, and no other highway is mapped within 1.5 miles outside it. A bore under the highway needs a route that avoids cutting the pavement. The mapped public road network totals 3.9 centerline miles, but the Census map lists no named streets here. That means a proposed route is best identified by an address or map pin rather than by a street name.

CrossingTypeMapped extentWho has a say
Texas State Highway 36State highway1 roadway miles insideState highway office
Leon RiverStream2.9 channel miles insideChecked for Corps of Engineers jurisdiction
Resley CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Lamkin or within 1 mile outside the community boundary, so there is no mapped track crossing to plan around. The Leon River runs for 2.9 channel miles through the community, and one mapped street crossing intersects a named stream. That river crossing can affect depth, access and the bore path. At a Leon River crossing in Lamkin, we check during planning whether the US Army Corps of Engineers has jurisdiction.

Who approves a Lamkin bore in Comanche County?

Lamkin is an unincorporated community with no city government, so work on local streets is not handled by a Lamkin city office. For work in the right of way of Texas State Highway 36, the utility owner applies through TxDOT’s online RULIS system, and the TxDOT Brownwood District reviews it. Trinity prepares the bore plan and profile and works under the permit issued to the utility owner. Highway cover requirements set the route depth: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches. The district can set another depth in the permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Comanche County near Lamkin?

EPA drinking water records do not identify a provider for a specific Lamkin address. Confirm the water provider with the city, county or local water district before planning a bore. Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative Service report electric service in Comanche County. Those reports do not identify which company serves each address, so confirm the line owner before a conduit bore near Texas State Highway 36.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative ServiceElectric utilities reporting service in Comanche CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published reliably for a place as small as Lamkin, so the age of nearby buried lines cannot be inferred from a townwide survey. A new service or a replacement route may run alongside Texas State Highway 36, but the existing line path has to be located first. Before drilling near a marked line, we hydrovac pothole it to see its depth; paint alone shows position, not depth. Comanche County averages 31.5 inches of precipitation a year, with May averaging 4.4 inches, so timing and site conditions also matter around the Leon River.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Lamkin from Carlton and other nearby places?

Lamkin is an unincorporated community in southeastern Comanche County at an elevation of 1,064 feet. Its mapped area is 0.68 square miles and its ZIP code is 76455. Gustine is 8.4 miles west, and Carlton is 8.5 miles northeast. Hamilton is 12.0 miles southeast, while Comanche, the county seat, is 20.8 miles west. Stephenville is 27.1 miles north. From our Yukon yard, the drive to Lamkin is 326 road miles and 6.6 hours, which affects mobilization for work along Texas State Highway 36 or the Leon River.

Places near Lamkin

What would we bore near the Leon River in Lamkin?

  • Highway crossing: A conduit bore beneath Texas State Highway 36 keeps the pavement uncut and follows the depth set by the TxDOT permit.
  • Water service: A route near the Leon River needs a confirmed water provider and a bore plan suited to the channel and flood prone soils.
  • Electric conduit: Oncor and other county reporting utilities do not identify each address, so we confirm the line owner before setting a route near Texas State Highway 36.
  • Fiber route: A fiber bore through Lamkin’s 3.9 miles of mapped public roads can avoid cutting the surface while following the confirmed utility path.
  • River crossing: A bore beneath the Leon River needs planned depth and review for U.S. Army Corps of Engineers jurisdiction.
  • Service extension: A line toward Carlton can require added mobilization from Yukon and a route checked for marked utilities before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore under Texas State Highway 36 in Lamkin?

For a Lamkin quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Note if the route reaches Texas State Highway 36 or the Leon River, since those features can change the proposed path and the work needed to price it.

The job scope sets the price, with Lamkin’s mapped clay loam and flood prone soils shaping the ground plan. Crossings of Texas State Highway 36 or the Leon River can add depth, access or protection needs. Pipe size, bore length, utilities to expose, pavement, pits, excavator time and sand backfill also affect the work. Mobilization is part of the logistics because Lamkin is 326 road miles from Yukon. High profile or emergency work near Resley Creek can alter the route, so we revise our Lamkin boring plan when conditions change.

Questions people ask about boring in Lamkin

Does Trinity Boring Solutions take directional boring jobs in Lamkin, Comanche County, and how are crews assigned?

Yes. We take work in Lamkin, Comanche County, with our own crews and partner contractor satellite yards supporting jobs. From our first call through the bore log, we coordinate Lamkin work in Comanche County, regardless of which crew is on site. A route under Texas State Highway 36 still needs to match the permit issued to the utility owner.

How old are homes and buried lines in Lamkin, Comanche County, for a replacement bore?

The Census Bureau does not publish reliable housing figures for Lamkin, so a townwide housing age or buried line age is not available. A replacement bore and a new service need different route checks. For either one, we locate and expose marked lines along Texas State Highway 36 before the drill gets near them.

Could groundwater or flood prone soil affect bore pits near the Leon River in Lamkin?

Flood prone soils cover 31 percent of mapped Lamkin, including ground near the Leon River, so the crossing depth and pit locations need attention. Seasonal water table is not mapped within 60 inches. We plan around actual site conditions and check the river crossing for U.S. Army Corps of Engineers jurisdiction.

What ground does a bore pass through in Lamkin near Pedernales soil?

The USDA soil survey maps Pedernales soils across 31 percent of Lamkin. At about 40 inches, silt loam makes up 27 percent of mapped texture and sandy clay 21 percent. The average clay share is 29 percent, so we plan the drilling fluid and reaming for the ground encountered along the specific route.

Could we encounter rock during a directional bore in Lamkin, and how do we account for Pedernales soils before drilling?

The soil survey maps bedrock within 60 inches in 2 percent of Lamkin and none within 40 inches, which does not rule out deeper rock. The geologic map identifies the Aptian age Twin Mountains Formation, with sandstone, claystone and conglomerate. A site check helps determine whether the bore needs a soil or rock approach.

For a bore under Texas State Highway 36 in Lamkin, do we seek approval through the TxDOT Brownwood District?

TxDOT reviews work in the Texas State Highway 36 right of way through its Brownwood District. The utility owner files the application in TxDOT’s RULIS system; Trinity provides the bore plan and profile and works under that permit. Required cover depth is set by the line type and can be adjusted in the permit.

Can I reach Trinity after hours about an urgent bore in Lamkin, Comanche County?

Yes. A person answers Trinity’s phone, (405) 409-7423, 24 hours a day for urgent work in Lamkin, Comanche County. Tell us whether the job involves the Leon River or Texas State Highway 36, along with the line type and location, so we can understand the immediate scope.

How much notice does Texas811 need for a bore in Lamkin, Comanche County?

For a Lamkin bore, place the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. With Lamkin 326 road miles from the Yukon main office, if the start slips more than 14 days past the original notice, we make a new request. For a Lamkin job near Gustine, we have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near Texas State Highway 36 in Lamkin?

The scope drives the price, not just the footage. Lamkin’s clay loam and flood prone soils affect ground planning, while a crossing of Texas State Highway 36 or the Leon River can add depth and access work. Pipe size, length, exposed utilities, pavement, pits, equipment time and the 326 road mile trip from Yukon also matter.

Where the Lamkin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lamkin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lamkin, Texas

Type the address of your job in Lamkin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lamkin

Same county: Comanche · De Leon. All counties: Texas county list.