trinityboringsolutions.com

Priddy Texas Directional Boring: Bolar Clay Loam, Cowhouse Creek, Highway 16

Quick Answer: Can we get a line under Texas State Highway 16 or Cowhouse Creek without cutting the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Priddy and across Texas. Priddy is 333 road miles from our Yukon, Oklahoma main office, and the route may involve 1st Street or FM 218. Bolar soil and heavy clay can stick to the reamer and grip pipe, so the bore needs staged reaming and careful fluid control. Cowhouse Creek crossings are planned for the channel and checked for federal jurisdiction.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Priddy bores at a glance

  • Unincorporated community in Mills County, Texas. Population 150 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 333 miles, about 6.8 hours of driving.
  • Ground: Bolar soil is mapped on 41 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 42 percent of the area.
  • Highways inside the boundary: Texas State Highway 16 and FM 218. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cowhouse Creek and Little Mountain Creek.
  • Public water: Priddy Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under 1st Street in Priddy?

Trinity Boring Solutions takes directional boring work in Priddy, Mills County, including routes along 1st Street and Texas State Highway 16. The Census Bureau counted 150 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, including service runs that connect homes or properties along Priddy’s named streets.

Our main office is in Yukon, Oklahoma, and Priddy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service line near 1st Street or a larger casing beneath Texas State Highway 16, our range runs from 3/4 inch service lines to 48 inch casing. Our family business began in 1965 and has done directional boring since 1982; Bolar soils inform planning for proposed Priddy bores.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bolar soil like to bore in Priddy?

Priddy ground is commonly mapped as Bolar soil, with Bolar clay loam and Bolar Brackett complex among the mapped units. The USDA soil survey maps clay loam across 41 percent of the community and clay across 18 percent. At about 40 inches below the surface, bedrock is mapped across 42 percent and silty clay across 30 percent. We treat Priddy’s mapped Leeray, Krum, and Sunev soil patterns as planning references, not test borings, before laying out a bore path. Clay can hold an open hole, but sticky cuttings may build on a reamer and the clay can grip pipe as it is pulled in.

USDA soil survey, inside the Priddy mapped community boundaryWhat is mapped
Soil series mappedBolar 41 percent, Leeray 18 percent, Krum 17 percent, Sunev 10 percent and Caradan 9 percent
Texture at the surfaceclay loam 41 percent, gravelly clay loam 19 percent and clay 18 percent
Texture about 40 inches downbedrock 42 percent, silty clay 30 percent and loam 10 percent
Engineering class about 40 inches downfat clay (CH) 39 percent and lean clay (CL) 19 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches42 percent of the area (42 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel49 percent of the area

The USDA soil survey maps bedrock within 60 inches across 42 percent of Priddy, with typical bedrock depth at 32 inches; the mapped bedrock is hard rather than weathered. That can call for a rock bit or slower drilling where the bore meets rock. Seasonal water tables are not mapped in the top five feet, while flood prone soils cover 5 percent, so Cowhouse Creek still needs a channel focused plan. With clay loam at the surface, we account for mapped high steel corrosion risk across 49 percent when planning Priddy bores. The Cenozoic Stony Calcareous Clay Solution Residuum and Albian Walnut Clay map units include limestone, shale and clay, which can make ground conditions change along a route.

How do we drill Priddy ground with shallow bedrock?

We plan each Priddy bore around the USDA survey’s Bolar clay and shallow bedrock mapping, then adjust the drilling method to the route. That helps control sticky cuttings and keep the head on line where soil meets rock.

  1. Bolar clay can stick to the reamer, so we use thinner drilling fluid and polymer, then ream in stages before pulling pipe along a Priddy route.
  2. With heavy clay mapped across 39 percent of the area at about 40 inches, we watch fluid returns near pavement to avoid lifting the surface.
  3. Bedrock is mapped within five feet across 42 percent of Priddy, so the transition from clay to rock may call for slower drilling and a rock bit.
  4. At Cowhouse Creek, we plan the bore below the channel and check jurisdiction during planning; a walkover locator tracks the head and records depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What is in the way of a new line across Cowhouse Creek in Priddy?

Priddy routes may meet Texas State Highway 16 or FM 218, both mapped inside the community boundary. A line beneath existing highway pavement is installed by boring or tunneling, not by opening the pavement. Among the named streets, 1st Street is 0.42 miles long, Schlee Street is 0.39 miles and 2nd Street is 0.29 miles. Ridge Drive is also mapped here. These streets help identify a route, but the exact crossing and access points depend on the proposed line.

CrossingTypeMapped extentWho has a say
Texas State Highway 16State highway3 roadway miles insideState highway office
FM 218State highway3.9 roadway miles insideState highway office
Cowhouse CreekStream2.25 channel miles insideChecked for Corps of Engineers jurisdiction
Little Mountain CreekStream1.08 channel miles insideChecked for Corps of Engineers jurisdiction
Mountain CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Priddy or within one mile outside its boundary, so a rail agreement is not part of the mapped crossing picture. Cowhouse Creek runs 2.25 channel miles inside the community, and Little Mountain Creek runs 1.08 channel miles. Public records map five street crossings of named streams. A bore near Cowhouse Creek needs a route planned around the channel, with federal jurisdiction checked during planning; no lakes or ponds are mapped within one mile.

Who approves a Priddy bore in Mills County?

Priddy is an unincorporated community in Mills County, so it has no city government; streets and permits fall to the county or state authority responsible for the road. For work in the right of way of Texas State Highway 16 or FM 218, the line owner, not the driller, applies through TxDOT’s RULIS system. TxDOT’s Brownwood District reviews the application, and we provide the bore plan and profile for the owner’s filing. For a creek route at Cowhouse Creek, planning includes checking U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Priddy Water Supply Corporation lines?

Priddy Water Supply Corporation uses groundwater wells and reports 94 service connections serving 276 people. Electric service reported in Mills County includes Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association. Those reports do not identify the provider at every Priddy address, so we confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
Priddy Water Supply CorporationPublic water systemGroundwater wells94 connections, 276 people served
Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative AssociationElectric utilities reporting service in Mills CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Priddy’s median housing year at 1978, with 30 percent built before 1960 and 4 percent built in 2000 or later. That mix can mean a project is replacing older pipe or adding a newer service near 1st Street. Along 1st Street, we hydrovac pothole every marked utility on the bore path before drilling nearby; paint shows position, not depth. For example, a proposed line under Schlee Street needs marked utilities exposed before the drill approaches.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Priddy in relation to Brownwood?

Priddy is an unincorporated community in Mills County, 27.5 miles east of Brownwood, the nearest larger city listed in public records. The mapped community covers 4.0 square miles, sits at 1,561 feet elevation and uses ZIP code 76442. Mullin is 12.3 miles southwest, Gustine is 13.4 miles northeast, and Goldthwaite, the county seat, is 16.0 miles south. The Yukon yard is 333 road miles away, about a 6.8 hour drive, which affects mobilization for work near Cowhouse Creek or FM 218.

Places near Priddy

What kinds of bores come up near Schlee Street in Priddy?

  • Highway crossing: A bore beneath Texas State Highway 16 keeps the existing pavement uncut, with the line owner arranging the right of way permit.
  • Water service: A connection near Priddy Water Supply Corporation lines needs the route checked against existing service lines before drilling.
  • Street conduit: A fiber or electric conduit under 1st Street can avoid cutting the street surface, with marked utilities exposed along the bore path.
  • Creek crossing: Cowhouse Creek calls for a bore planned below the channel and a jurisdiction check during crossing planning.
  • Local service: A line near Schlee Street can connect a property while keeping the street surface intact and checking nearby marks first.
  • Farm and acreage service: A longer run outside the built up area can use FM 218 as a route reference, with access and footage reviewed for the quote.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Texas State Highway 16 in Priddy?

Send a map pin or address first, because the exact spot near Texas State Highway 16 or Cowhouse Creek shows which road, channel or utilities the route may cross. For a Ridge Drive bore, we list the material going underground, pipe or conduit size, and footage in the project details. A sketch or plans help us review the bore path and access points in Priddy.

In Priddy, soil and rock conditions come first: Bolar clay and bedrock mapped within 60 inches can affect drilling time and tooling. The number of utilities to expose, pavement near Texas State Highway 16, and a Cowhouse Creek crossing also shape the work. Pipe size, bore length, pits, excavator time and sand backfill matter too. Mobilization reflects the 333 road miles from Yukon, while high profile or emergency work can add planning needs.

Questions people ask about boring in Priddy

Does Trinity Boring Solutions take directional boring jobs in Priddy and Mills County?

Yes, we take directional boring work in Priddy and across Mills County. Our Yukon main office coordinates the job, and the work is done by our crews or by partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, including work near 1st Street or Cowhouse Creek.

Is there rock under Priddy, and how much bedrock is mapped?

The USDA soil survey maps bedrock within 60 inches across 42 percent of Priddy, and it is mapped as hard bedrock rather than weathered bedrock. Typical depth is 32 inches. These are survey patterns, not test borings, so a route near Bolar soil may need slower drilling where the bore meets rock.

Who handles permits for a Priddy bore under Texas State Highway 16 at TxDOT Brownwood District?

The line owner applies for the right of way permit through TxDOT’s RULIS system, and TxDOT’s Brownwood District reviews it. For TxDOT Brownwood District filings, we provide the bore plan and profile needed to document the proposed crossing. A crossing beneath Texas State Highway 16 pavement is installed by boring or tunneling, and the permit can set the required depth.

Can you bore a line under Cowhouse Creek in Priddy?

A bore can be planned beneath Cowhouse Creek, which runs 2.25 channel miles inside Priddy. We plan for the channel and check U.S. Army Corps of Engineers jurisdiction during planning. The proposed route and ground conditions determine the bore details, and mapped street crossings of named streams total five in the community.

Who runs Priddy’s public water system in Mills County, and where does its water come from?

Priddy Water Supply Corporation runs the public water system, which uses groundwater wells. Priddy’s public system lists 94 service connections and 276 people served, helping us plan utility coordination around existing underground service. Before a bore near the system’s lines, we check the marked route, including where a proposed service might meet 1st Street.

Which electric companies report service in Priddy and Mills County?

Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association report electric service in Mills County. Those records do not identify the provider at every Priddy address. We confirm the line owner before planning an electric conduit bore near Texas State Highway 16 or a named street.

What bore sizes and lengths can you handle for a job near Ridge Drive in Priddy?

For Priddy project planning, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Ridge Drive still depends on the route, soil and utility crossings. The map pin and planned footage help us assess the scope.

How much notice does Texas811 need before a bore near 1st Street in Priddy?

Texas law requires a Texas811 locate request at least 48 hours before excavation starts, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Priddy scheduling, if the start moves more than 14 days past the original notice, we make a new request. Marks near 1st Street that wear off or move must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under Texas State Highway 16 in Priddy?

The price depends on the route and scope, not only its length. Bolar clay and bedrock mapped within 60 inches can affect tooling and drilling time, while pavement, utility exposures and a Cowhouse Creek crossing add work. Pipe size, pits and mobilization from the Yukon yard also matter for a Priddy job.

Where the Priddy facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Priddy

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Priddy, Texas

Type the address of your job in Priddy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Priddy

All counties: Texas county list.