trinityboringsolutions.com

Proctor Texas Directional Boring: Bastrop Soil, US 377, Fort Worth and Western Railroad

Quick Answer: Baker Street, Texas Avenue and Oak Street are Proctor’s longest named streets, while US 377 and US 67 pass through the mapped community. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines crossing those roads and the Fort Worth and Western Railroad. From our Yukon, Oklahoma main office, Proctor is 304 road miles away, and the US 377 corridor is one local access point to assess for mobilization. The USDA soil survey maps Bastrop loamy fine sand near the surface and sandy clay loam at about 40 inches across 59 percent of the area, so ground conditions can change with depth.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Proctor bores at a glance

  • Unincorporated community in Comanche County, Texas. Population 93 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 304 miles, about 6.1 hours of driving.
  • Ground: Bastrop soil is mapped on 52 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: US 377, US 67 and FM 1476. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 3 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Proctor along US 377?

We take directional boring work in Proctor, an unincorporated community in Comanche County. The Census Bureau counted 93 residents in 2020; it does not publish yearly estimates for unincorporated places. Along US 377, FM 1476 or a local street, we install water, sewer, gas, electric conduit and fiber lines by boring where the route and access allow.

Our main office is in Yukon, Oklahoma, and Proctor work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; for Proctor’s sandy clay loam, we plan each bore to suit the ground. We have had no utility strike in over 25 years, including on work involving lines such as those reported by Comanche County electric providers along Proctor’s roads.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does Bastrop soil mean for a Proctor bore?

The USDA soil survey maps Bastrop soil across 52 percent of Proctor, with Bastrop loamy fine sand, 1 to 5 percent slopes, covering 51 percent of the mapped area. Demona loamy sand accounts for another 22 percent. Near the surface, loamy fine sand and loamy sand are common, but the texture changes lower down: at about 40 inches, sandy clay loam is mapped under 59 percent of the area and sandy clay under 31 percent. Those deeper, stickier soils can hold an open bore and build up on a reamer, while the sandy upper layers can cave behind the drill.

USDA soil survey, inside the Proctor mapped community boundaryWhat is mapped
Soil series mappedBastrop 52 percent, Demona 22 percent, Chaney 9 percent, May 7 percent and Brackett 7 percent
Texture at the surfaceloamy fine sand 51 percent, loamy sand 31 percent and fine sandy loam 8 percent
Texture about 40 inches downsandy clay loam 59 percent, sandy clay 31 percent and bedrock 7 percent
Engineering class about 40 inches downlean clay (CL) 63 percent, fat clay (CH) 22 percent and clayey sand (SC) 8 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches15 percent of the area (0 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches22 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel31 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches on 15 percent of Proctor and within 40 inches on 7 percent; the typical mapped depth is 36 inches. A bore may slow where it meets weathered rock. A seasonal water table is mapped within 40 inches on 22 percent of the area, so pits may need pumping. Because flood prone soils are not mapped in Proctor, we check the site before choosing a bore path. High steel corrosion risk applies to 31 percent of the area, which matters for uncoated steel casing or tracer wire; the line owner chooses any coating. The geologic map includes Quartz sand decomposition residuum of Cenozoic age and the Early Cretaceous Twin Mountains Formation, described as sandstone, claystone and conglomerate.

How do we plan a bore through Proctor’s sandy clay loam while accounting for the ground along the route?

Proctor’s mapped ground changes from sandy surface soils to clay rich material lower down. We adjust drilling fluid and reaming to the soil along the route, and use the recorded ground pattern as planning information, not as a substitute for site checks.

  1. In Bastrop loamy fine sand and Demona loamy sand near the surface, we use drilling fluid and staged reaming to help keep the hole open until the pipe is ready.
  2. Where sandy clay loam or sandy clay appears lower down, we manage sticky returns with thinner fluid and polymer, then ream in stages and pull pipe promptly.
  3. With seasonal water table mapped within 40 inches on 22 percent of Proctor, we keep pits small and pump out water if a pit fills.
  4. Before approaching marked lines along Baker Street or Texas Avenue, we expose each one with hydrovac; a walkover locator tracks the head and logs depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where does a Proctor bore go under the Fort Worth and Western Railroad?

US 377, US 67 and FM 1476 run through the mapped Proctor community. A route on any of those roads needs a crossing plan that accounts for the road and its right of way. Baker Street is the longest named street at 0.5 miles inside the community; Texas Avenue runs 0.27 miles and Oak Street 0.25 miles. Those short streets can still carry buried services, so a planned bore needs utility locates and potholing before the drill approaches a marked line.

CrossingTypeMapped extentWho has a say
US 377US highway0.5 roadway miles insideState highway office
US 67US highway0.5 roadway miles insideState highway office
FM 1476State highway2.1 roadway miles insideState highway office
Fort Worth and Western RailroadRailroad0.77 track miles insideThe railroad
Walnut CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 0.77 track miles inside the mapped community, and three street and rail crossings are mapped there. A route beneath its track needs an agreement with the railroad, which sets the crossing terms. No named stream runs inside the community, and no street crossings of named streams are mapped there. Walnut Creek runs along or touches the boundary, so a route that crosses it needs a channel plan; creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. With no lakes or ponds mapped within one mile of Proctor, we can assess each proposed bore route using the available map.

Who has to sign off on a Proctor bore in Comanche County?

Proctor has no city government, so a street approval belongs to Comanche County or the state, depending on who controls the road. For work in the right of way of US 377, US 67 or FM 1476, TxDOT requires a utility permit reviewed by its Brownwood District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the utility owner’s permit. TxDOT rules set cover requirements, including 60 inches at highway crossings for electric, communication and water lines, and for pressurized sewer. A crossing beneath the Fort Worth and Western Railroad also needs an agreement with the railroad. Walnut Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Proctor and Comanche County?

EPA drinking water records do not tie a water system to Proctor, and no system name identifies the provider for this address. The water provider for a specific address has to be confirmed with the county or local water district before a bore is planned. Utilities reporting electric service in Comanche County include Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative Service. The line owner must be confirmed before we plan an electric conduit bore near Baker Street or another route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Hamilton County Electric Cooperative Association and United Electric Cooperative ServiceElectric utilities reporting service in Comanche CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

With Proctor’s median housing year at 1994 in the American Community Survey 2019 to 2023 five year estimates, we verify utility locations before underground work. The estimates place 88 percent of housing units in 1960 to 1999 and 12 percent in 2000 or later. A replacement route along Texas Avenue may meet existing service lines, while a new service may follow a different path. We hydrovac pothole marked utilities on the bore route before drilling near them, since paint shows location but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Proctor in relation to Gustine and nearby towns?

Proctor is an unincorporated community in eastern Comanche County, at an elevation of 1,211 feet and with a mapped area of 0.41 square miles. Its ZIP code is 76446. Dublin is 8.8 miles northeast, Gustine is 9.9 miles south, De Leon is 10.6 miles northwest, and Comanche, the county seat, is 11.8 miles southwest. Stephenville is the nearest larger city, 20.0 miles northeast. From the Yukon, Oklahoma main office, the drive is 304 road miles and 6.1 hours, a distance that affects crew mobilization for work near US 377.

Places near Proctor

What kinds of bores come up near Proctor’s Texas Avenue?

  • Highway crossing: A bore beneath US 377 or US 67 follows a planned route under the road rather than cutting through its pavement.
  • Street service: A water or sewer connection along Oak Street can use a bore to pass beneath the street surface and nearby marked utilities.
  • Rail crossing: A route under the Fort Worth and Western Railroad requires the railroad’s agreement and a plan for its track crossing.
  • Creek crossing: A bore near Walnut Creek needs a route that accounts for the channel and a check for federal jurisdiction during planning.
  • Fiber conduit: A conduit route along Texas Avenue can avoid an open cut, with hydrovac checks where marked lines cross its path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Proctor bore near Walnut Creek?

For a Proctor quote, send the address or map pin, what goes underground, pipe or conduit size and footage; sketches help us account for sandy clay loam. A route near Walnut Creek or the Fort Worth and Western Railroad needs enough detail to identify the crossing and access points, since those conditions can change the bore plan.

The route length and pipe or conduit size shape the work, and Proctor’s sandy surface soils over deeper sandy clay loam affect fluid and reaming choices. Railroad crossings add coordination with the Fort Worth and Western Railroad, while US 377 or FM 1476 right of way can require a TxDOT permit. Pavement, marked utilities, creek crossings, pits, excavator time and sand backfill also affect the scope. The 304 road miles from Yukon matter when planning mobilization; emergency or high profile work can require additional planning.

Questions people ask about boring in Proctor

Does Trinity take directional boring jobs in Proctor and Comanche County, and who staffs them?

Yes. We take work in Proctor and Comanche County using our crews or crews from partner contractors we have vetted. The work is coordinated through Trinity, from the first call through the bore log, even when a partner crew is on site. We can plan routes near US 377, the railroad or local streets.

Who owns electric lines in Proctor, Comanche County, and who confirms conduit specs?

Several utilities report service in Comanche County, including Oncor Electric Delivery Company, Texas-New Mexico Power and Comanche County Electric Cooperative Association. That does not establish which one serves a particular Proctor address. Confirm the line owner and conduit requirements with the utility before planning a bore along a route such as Baker Street.

Does Comanche County control Oak Street in Proctor, and can a bore avoid cutting it?

Proctor is unincorporated and has no city government, so its streets are under county or state control rather than a city department. A directional bore can pass beneath Oak Street without an open cut, subject to the road authority’s approval and the route. Locates and potholing help identify buried lines before drilling.

What do Proctor’s Texas Avenue housing ages mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Proctor a median housing year of 1994, with 88 percent of units built from 1960 to 1999. That can mean a Texas Avenue replacement project needs to work around existing services, while a new service may need a separate route. Before drilling near marked utilities in Proctor, we pothole them to confirm their location.

Can groundwater or Walnut Creek cause problems for Proctor bore pits?

They can affect planning in some locations. The USDA soil survey maps a seasonal water table within 40 inches on 22 percent of Proctor, so pits may need pumping. Walnut Creek runs along or touches the community boundary; a bore crossing its channel needs careful depth planning and a jurisdiction check during planning.

Does Bastrop soil in Proctor corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 31 percent of Proctor, including areas with Bastrop soil. That is a concern for uncoated steel casing or tracer wire. HDPE is not affected by soil corrosion, while the line owner selects any coating for steel. Confirm the material choice with the owner of the line.

Does Trinity cover Dublin and rural sites outside Proctor?

Yes. We take work in Dublin, which is 8.8 miles northeast of Proctor, as well as rural locations outside the mapped community. The route, access and distance from our Yukon main office affect mobilization. For a site near US 377, a map pin helps us review the road and nearby crossings.

How much notice does Texas811 need before a Proctor bore near Baker Street, and what if marks change?

Count back at least two working days from the planned start near Baker Street, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead, and if the start slips more than 14 days past the original notice, make a new request. If marks are worn or moved along a Proctor bore route, we have them refreshed through Texas811 before work continues.

What affects the cost of directional boring near US 377 in Proctor?

The job’s length and pipe or conduit size matter, along with Proctor’s sandy surface soils and deeper clay rich ground. A US 377 or FM 1476 crossing may involve right of way permitting, while the Fort Worth and Western Railroad adds crossing coordination. Pavement, utility exposures, pits, creek conditions, equipment time and mobilization from Yukon also shape the scope; there is no single price for every route.

Where the Proctor facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Proctor

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Proctor, Texas

Type the address of your job in Proctor. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Proctor

All counties: Texas county list.