trinityboringsolutions.com

Hereford Texas Directional Boring: Pullman Clay Loam, BNSF Railway and Tierra Blanca Creek

Quick Answer: What lies in the top five feet around Hereford? The USDA soil survey maps Pullman clay loam across 68 percent of the city, and bedrock is not mapped there. Directional boring, also called horizontal directional drilling (HDD), lets our crews plan for crossings near BNSF Railway tracks. Hereford is 302 road miles from our Yukon, Oklahoma main office, and US 60 is a local route a bore may need to cross. Pullman clay loam holds an open hole but can stick to the reamer, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hereford bores at a glance

  • County seat of Deaf Smith County, Texas. Population 14,860 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 302 miles, about 5.7 hours of driving.
  • Ground: Pullman soil is mapped on 69 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 60, US 385, FM 1058, FM 1259 and FM 2856. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway, with 30 mapped street and rail crossings.
  • Named streams inside the boundary: Tierra Blanca Creek.
  • Public water: Hereford Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near BNSF Railway in Hereford?

We take directional boring work in Hereford, the Deaf Smith County seat, where the Census Bureau Vintage 2024 estimate puts the population at 14,860. Along streets such as Avenue K, our crews install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement and other surface features. We also use horizontal directional drilling (HDD) where the route calls for it.

Our main office is in Yukon, Oklahoma, and Hereford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. That history and our range, from 3/4 inch service lines to 48 inch casing, suit work from a 1st Street service to a larger crossing near BNSF Railway.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Pullman soil in Hereford?

The USDA soil survey maps Pullman soil across 69 percent of Hereford, with Pullman clay loam, 0 to 1 percent slopes, covering 68 percent. Surface texture is clay loam across 91 percent of the mapped city area. At about 40 inches below the surface, the survey maps clay loam across 95 percent and an average clay content of 37 percent. For Hereford bore planning, we treat mapped soil patterns as regional guidance, not test borings at the proposed route. The clay rich ground can hold an open bore, but it can also cling to the reamer and grip pipe.

USDA soil survey, inside the Hereford city limitsWhat is mapped
Soil series mappedPullman 69 percent, Pep 9 percent, Estacado 8 percent, Berda 8 percent and Bippus 4 percent
Texture at the surfaceclay loam 91 percent and loam 9 percent
Texture about 40 inches downclay loam 95 percent and sandy clay loam 4 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel87 percent of the area

Bedrock is not mapped in the top five feet of Hereford, and the mapped area with a seasonal water table within 40 inches is 1 percent. Flood prone soils cover 4 percent, so a route near Tierra Blanca Creek deserves attention to channel depth and possible Corps jurisdiction. High steel corrosion risk is mapped across 87 percent, which matters for uncoated casing and tracer wire; the line owner selects coatings, while HDPE avoids that steel corrosion concern. The geologic map shows the Cenozoic Blackwater Draw Formation, made up of sand, fine alluvium and silt, with thickness as much as 25 feet.

How do we bore Hereford’s clay loam?

Pullman clay loam dominates the mapped ground in Hereford. We choose the drilling fluid and reaming sequence to keep the hole workable without forcing excess pressure beneath streets such as Avenue K.

  1. Pullman clay loam can cling to the reamer, so we use a thinner fluid mix with polymer and open the hole in stages before pulling pipe.
  2. Where Hereford’s mapped heavy clay is present, we watch fluid returns and keep pressure controlled to avoid lifting pavement along streets such as Avenue K.
  3. A creek route at Tierra Blanca Creek needs depth planning below the channel; we track the drill head from the surface and log depth and pitch.
  4. Before drilling near any marked line on a proposed 1st Street route, we expose it with hydrovac potholing because surface marks do not show depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Hereford bore cross near Avenue K?

US 60 and US 385 run through Hereford, along with FM 1058, FM 1259 and FM 2856. A route beneath one of these highways calls for highway right of way planning, not an open cut through existing pavement. Avenue K is the city’s longest named street at 3.75 miles, followed by 1st Street at 2.78 miles and Park Avenue at 2.71 miles. Their length makes them useful route references, but each proposed crossing still depends on the actual line path and marked utilities.

CrossingTypeMapped extentWho has a say
US 60US highway3.7 roadway miles insideState highway office
US 385US highway2.8 roadway miles insideState highway office
FM 1058State highway1.5 roadway miles insideState highway office
FM 1259State highway0.7 roadway miles insideState highway office
FM 2856State highway0.6 roadway miles insideState highway office
BNSF RailwayRailroad11 track miles insideThe railroad
Tierra Blanca CreekStream3.36 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 11.0 track miles in Hereford, and public mapping shows 30 street and rail crossings in the city. A crossing of BNSF Railway needs an agreement with the railroad that owns the track, with the agreement setting casing, depth and flagging. Tierra Blanca Creek runs 3.36 channel miles through the city, and six mapped streets cross named streams. Hereford’s mapped area shows no lakes or ponds within one mile, but we still confirm the specific bore path before planning. A creek route needs channel depth planning and a check for Corps jurisdiction.

Who approves a bore on Hereford roads in Deaf Smith County?

Hereford is incorporated, so its city streets belong to the city itself; we do not assume a highway permit covers a city street such as Park Avenue. For US 60, US 385 or a farm to market road, the line owner, not the drilling contractor, applies for a TxDOT utility permit through RULIS. TxDOT’s Amarillo District reviews it, and we give the utility owner the bore plan and profile and work under its permit. TxDOT cover rules set 60 inches for electric and communication lines crossing a highway, 48 inches along its right of way, and 60 inches for water crossings. The permit can require another depth. A BNSF Railway crossing needs the railroad’s agreement, and a Tierra Blanca Creek route is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground near Hereford Municipal Water System?

The Hereford Municipal Water System serves 16,048 people through 6,577 service connections and draws from groundwater wells. That existing network can affect a proposed service route along Avenue K or 1st Street. Southwestern Public Service, Deaf Smith Electric Cooperative and Farmers Electric Cooperative report electric service in Deaf Smith County. We confirm the electric line owner for the specific address before planning a conduit bore; those county reports do not establish which provider serves every Hereford property.

Line ownerWhat it isSourceSize
Hereford Municipal Water SystemPublic water systemGroundwater wells6,577 connections, 16,048 people served
Southwestern Public Service, Deaf Smith Electric Cooperative and Farmers Electric CooperativeElectric utilities reporting service in Deaf Smith CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use the American Community Survey 2019 to 2023 five year estimates carefully: Hereford’s median housing year is 1969, not a measure of underground conditions. The estimates show 28 percent of units built before 1960 and 11 percent built in 2000 or later, so a replacement bore near 1st Street may face older buried lines while newer services can call for a different route. Before the drill gets near a marked utility, we expose it by hydrovac potholing; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where does Trinity take directional boring work near Hereford and Summerfield?

Hereford is in Deaf Smith County, covers 6.32 square miles and sits at an elevation of 3,819 feet. We use ZIP code 79045 to identify the Hereford service location when organizing a directional boring quote. Summerfield is 8.4 miles southwest, Umbarger is 18.9 miles northeast, and Dimmitt is 19.7 miles south. Hereford is the county seat, and Amarillo, the nearest larger city listed, is 41.3 miles northeast. From our Yukon, Oklahoma main office, the road distance is 302 miles and the drive is 5.7 hours. That distance is part of planning a bore near US 60, especially when the job also needs equipment or excavator time.

Places near Hereford

Which jobs call for a bore near Park Avenue in Hereford?

  • Highway crossing: A bore under US 60 or US 385 avoids cutting existing pavement, with the route and cover addressed in the TxDOT permit.
  • Water service: A new connection near Hereford Municipal Water System lines needs a route that accounts for existing groundwater well supply piping.
  • Fiber conduit: A proposed Avenue K fiber route can pass beneath pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A Tierra Blanca Creek bore needs a plan for channel depth and a check for Corps jurisdiction during planning.
  • Rail crossing: A route under BNSF Railway requires the railroad’s crossing agreement to set casing, depth and flagging.
  • Replacement service: A bore near 1st Street can replace aging buried lines without opening a trench across the street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Hereford bore near Tierra Blanca Creek?

For a Hereford quote, send us the address or map pin, planned installation, pipe or conduit size, footage, and any sketch or plans. A route near Tierra Blanca Creek is worth showing clearly because the channel crossing and access affect the work plan.

Pullman clay loam is the first ground factor to assess because sticky clay can build on a reamer and grip the pipe. The price also reflects bore length, pipe or conduit size, marked utilities to expose, and pavement or concrete along Avenue K or US 60. A BNSF Railway or Tierra Blanca Creek crossing adds its own planning needs. Pits, excavator time, sand backfill, emergency scope and mobilization from Yukon matter too, with Hereford 302 road miles from our main office.

Questions people ask about boring in Hereford

Does Trinity take directional boring jobs in Deaf Smith County near Hereford?

Yes. We take work in Deaf Smith County, and Hereford jobs can be staffed by our crews or by partner drilling contractors we have vetted. You work with Trinity from the initial call through the bore log, even when a partner crew is on site. The route and job scope determine which crew handles the drilling.

How do Hereford’s older buried lines near 1st Street affect a replacement bore?

Hereford’s median housing year is 1969 in the American Community Survey 2019 to 2023 estimates, and 28 percent of housing units were built before 1960. Older properties near 1st Street may have buried lines that need careful locating before replacement work. We expose marked utilities before the drill approaches them.

Does Pullman soil in Hereford corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 87 percent of Hereford. That can matter for uncoated steel casing or tracer wire. HDPE is not subject to the same soil corrosion concern, but the line owner chooses coatings for steel components and confirms the material for the job.

What ground does a bore pass through in Hereford’s Pullman soil?

Pullman soil covers 69 percent of Hereford in the USDA soil survey. At about 40 inches down, clay loam is mapped across 95 percent of the city, with an average clay content of 37 percent. This mapped pattern suggests sticky ground that can hold a bore open but may load the reamer.

Could a directional bore in Hereford encounter rock beneath US 60, and what site information would help us assess the crossing?

Bedrock is not mapped in Hereford’s top five feet, but that does not rule out rock at greater depth. The geologic map identifies the Cenozoic Blackwater Draw Formation, including sand, fine alluvium and silt. A project near Tierra Blanca Creek still needs a site specific route and depth plan.

Who approves a bore beneath US 60 in Hereford?

For work in US 60 right of way, the utility owner applies for the TxDOT permit through RULIS, and TxDOT’s Amarillo District reviews it. We provide the bore plan and profile to the line owner and work under its permit. A city street such as Avenue K follows a separate city street route.

How early should I call Texas811 for a bore along Avenue K in Hereford?

Plan the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. We schedule Hereford work around Texas811’s description of that notice period as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.

Does Hereford’s distance from Amarillo change a job mobilized from Yukon?

From our Yukon, Oklahoma main office, we plan for Hereford as 302 road miles away and a 5.7 hour drive. Amarillo is 41.3 miles northeast of Hereford, but the job is planned around its actual location, access and equipment needs. The distance from Yukon can affect mobilization for a bore near US 385 or another local route.

What affects the cost of a directional bore beneath US 60 in Hereford, including the crossing route and the footage we need to install?

The job scope sets the price, with Pullman clay loam, bore length, pipe size and the utilities to expose among the main factors. A US 60 crossing adds highway planning, while Tierra Blanca Creek or BNSF Railway can bring added crossing requirements. Pavement, pits, excavator time and mobilization from Yukon also affect the work.

Where the Hereford facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hereford

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hereford, Texas

Type the address of your job in Hereford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hereford

All counties: Texas county list.