trinityboringsolutions.com

Friona Texas Directional Boring: Olton Clay Loam, US 60 and BNSF Railway

Quick Answer: Friona is an incorporated city, so its city streets belong to the city; US 60 and BNSF Railway shape crossing plans. We provide directional boring, also called horizontal directional drilling (HDD), for lines routed beneath Friona streets and US 60. The Yukon yard is 324 road miles from 11th Street in Friona, so distance affects mobilization. The USDA soil survey maps Olton clay loam across 66 percent of Friona, where sticky clay can load a reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Friona bores at a glance

  • Incorporated city in Parmer County, Texas. Population 4,071 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 324 miles, about 6.1 hours of driving.
  • Ground: Olton soil is mapped on 70 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 60, Texas State Highway 214 Business, Texas State Highway 214, FM 2397 and FM 2013. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: Friona Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can handle directional boring near US 60 in Friona?

Friona is an incorporated city in Parmer County, and we take directional boring work there along city streets such as 11th Street. Its Census Bureau Vintage 2024 estimate is 4,071 people. We install water, sewer, gas, electric conduit and fiber lines beneath routes such as US 60 or along local streets, with the exact path set by the project.

Our main office is in Yukon, Oklahoma, and Friona work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982; for a route across Friona’s 11th Street, our equipment range runs from 3/4 inch service lines to 48 inch casing.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Olton soil like to bore in Friona?

The USDA soil survey maps Olton clay loam, 0 to 1 percent slopes, across 66 percent of Friona, and clay loam is the dominant surface texture at 84 percent. About 40 inches below the surface, clay loam covers 73 percent of the mapped area and sandy clay loam covers 25 percent. The average clay content at that depth is 35 percent, and heavy clay is mapped across 73 percent. For Friona, we treat mapped soil patterns as planning context, not as test borings. Sticky clay can ball on a reamer and grip pipe, so the bore plan needs staged reaming and attention to fluid returns.

USDA soil survey, inside the Friona city limitsWhat is mapped
Soil series mappedOlton 70 percent, Bippus 14 percent, Acuff 6 percent, Posey 4 percent and Bovina 4 percent
Texture at the surfaceclay loam 84 percent, loam 10 percent and fine sandy loam 4 percent
Texture about 40 inches downclay loam 73 percent and sandy clay loam 25 percent
Engineering class about 40 inches downlean clay (CL) 94 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel70 percent of the area

Bedrock is not mapped in the top five feet of Friona, though the geologic map identifies the Ogallala Formation, a Pliocene unit of sand, silt, clay, gravel and caliche below. The USDA soil survey maps no seasonal water table within 60 inches, but flood prone soils cover 14 percent of the area, including Bippus clay loam map units described as occasionally flooded. High steel corrosion risk is mapped across 70 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel corrosion concern.

How do we bore Friona’s clay loam?

Friona’s mapped clay loam calls for controlled fluid and staged reaming. Along a route such as 10th Street, we track the drill head from the surface and log depth and pitch as the bore advances.

  1. With clay loam mapped across much of Friona, we use a thinner drilling fluid with polymer and ream in stages to manage sticky cuttings.
  2. Because the mapped soil averages 35 percent clay at about 40 inches, we watch returns and fluid pressure to avoid lifting pavement near US 60.
  3. Olton clay loam can grip the pipe, so we plan to pull it the same day the hole is opened along a route such as 10th Street.
  4. Before drilling near marked lines on 11th Street, we hydrovac pothole each one; a walkover locator tracks the head and records depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What might a bore cross in Friona near BNSF Railway?

Friona has US 60, Texas State Highway 214 Business, Texas State Highway 214, FM 2397 and FM 2013 within its limits, so a route may need to pass beneath a state or US highway. US 60 has 2.0 mapped roadway miles in the city. The longest named streets are 11th Street at 2.64 miles, 9th Street at 1.68 miles and 10th Street at 1.45 miles. Keeping a bore below these paved routes avoids cutting the surface, subject to the route and permit conditions.

CrossingTypeMapped extentWho has a say
US 60US highway2 roadway miles insideState highway office
Texas State Highway 214 BusinessState highway1.5 roadway miles insideState highway office
Texas State Highway 214State highway1.2 roadway miles insideState highway office
FM 2397State highway0.7 roadway miles insideState highway office
FM 2013State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad1.96 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 1.96 track miles in Friona on the Hereford Subdivision, and public mapping shows 3 street and rail crossings in the city. A bore near those tracks needs coordination with BNSF Railway before the crossing is planned. No named streams or lakes and ponds within one mile are mapped in Friona; the map does show 0.28 miles of unnamed drainage. That drainage may affect the bore route and access to its pits.

Who approves a bore under US 60 in Friona?

Friona is incorporated, so its city streets, including 11th Street, belong to the city; work in the right of way of US 60 or another state route needs a TxDOT utility permit. The line owner, not the drilling contractor, files through TxDOT’s online RULIS system, and the TxDOT Lubbock District reviews it. We give the utility owner a bore plan and profile to support its filing. Under US 60, TxDOT cover rules call for 60 inches at crossings for electric and communication lines and water lines; the permit may set another depth. Existing highway pavement is bored or tunneled, not open trenched.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Parmer County near Friona?

Friona Municipal Water System uses groundwater wells and serves 4,653 people through 1,553 service connections. In Parmer County, Southwestern Public Service, Bailey County Electric Cooperative Association, Deaf Smith Electric Cooperative and Farmers Electric Cooperative report electric service. Those county reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near the water system or US 60.

Line ownerWhat it isSourceSize
Friona Municipal Water SystemPublic water systemGroundwater wells1,553 connections, 4,653 people served
Southwestern Public Service, Bailey County Electric Cooperative Association, Deaf Smith Electric Cooperative and Farmers Electric CooperativeElectric utilities reporting service in Parmer CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Friona’s median housing year at 1971; 20 percent of homes were built before 1960, 70 percent from 1960 to 1999 and 10 percent in 2000 or later. That mix can mean replacement work as well as new services along 11th Street. Before the drill approaches a marked utility, we hydrovac pothole it to check its depth; paint alone shows its position, not how deep it sits.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Friona in relation to Bovina and other nearby places?

Friona is in Parmer County at an elevation of 4,026 feet, with 1.41 square miles of land and ZIP code 79035. Bovina is 12.6 miles southwest, Summerfield is 14.0 miles northeast, and Hereford is 22.3 miles northeast; Hereford is the nearest larger city. Dimmitt is 24.5 miles east, while Farwell, the county seat, is 25.1 miles southwest. Friona is 324 road miles and a 6.1 hour drive from our Yukon, Oklahoma yard, which affects mobilization for a bore here.

Places near Friona

What would we bore along 10th Street in Friona?

  • Highway crossing: A route beneath US 60 keeps the paved roadway intact, with the line owner obtaining the TxDOT permit.
  • Water service: A connection near Friona Municipal Water System needs a planned route that accounts for existing groundwater well lines.
  • Fiber conduit: A bore along 11th Street can pass beneath pavement without cutting the street surface.
  • Rail crossing: A route under BNSF Railway needs an agreement with the railroad before the track crossing is planned.
  • Street utility: Work beneath 10th Street starts with locating and exposing marked utilities along the planned bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Friona bore near 11th Street?

Start with the address or map pin, because a point on 11th Street differs from one beside US 60 or the BNSF Railway tracks. Tell us what is going underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, crossings and space for entry and exit pits before we build the bore plan.

Olton clay loam matters first in Friona because sticky ground can require staged reaming and careful fluid control. Price also reflects bore length, pipe or conduit size, and the number of utilities that must be exposed. A crossing beneath US 60 or BNSF Railway adds route and crossing requirements; pavement, drainage, pits, excavator time and sand backfill also shape the work. Mobilization reflects the 324 road miles from Yukon, and high profile or emergency work can add planning needs.

Questions people ask about boring in Friona

Does Trinity Boring Solutions take directional boring work in Friona and Parmer County?

Yes, we take directional boring work in Friona, Parmer County, with Trinity managing the job from the first call through the bore log. Our Yukon main office coordinates the work, using our own crews and satellite yards run by partner drilling contractors we have vetted. Routes may involve 11th Street, US 60 or other local crossings.

Could Olton soil or flooding affect bore pits in Friona?

It can affect planning, though the soil survey maps no seasonal water table within 60 inches of Friona’s surface. Flood prone soils cover 14 percent of the mapped area, and some Bippus clay loam is described as occasionally flooded. We assess the specific route and place pits with those mapped conditions in mind.

Does Olton soil in Friona corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 70 percent of Friona. The line owner should consider casing and tracer wire materials for a route near US 60 or 11th Street. HDPE is not affected by that soil corrosion concern, while the owner selects any coating for steel components.

What ground does a bore pass through in Friona’s Olton soil?

The USDA soil survey maps Olton soil across much of Friona, with clay loam covering 73 percent of the area at about 40 inches below the surface. Sandy clay loam accounts for 25 percent at that depth, and the mapped average clay content is 35 percent. These are survey patterns, not test borings.

Will mapped soil patterns in Friona tell us if a directional bore will hit rock?

Bedrock is not mapped in Friona’s top five feet, but that does not rule out deeper rock. The geologic map shows the Pliocene Ogallala Formation, made up of sand, silt, clay, gravel and caliche. We use the mapped information to plan, then evaluate actual drilling conditions along the route.

Who approves a bore beneath US 60 in Friona?

The utility owner applies for a TxDOT permit for work in the US 60 right of way, and the TxDOT Lubbock District reviews it. For the owner’s application in Friona, we provide the bore plan and profile to document the proposed crossing. TxDOT cover requirements depend on the line type and crossing, and the permit may set a different depth.

How far is Friona from the Yukon office, and does nearby Hereford change mobilization?

From our Yukon, Oklahoma main office, Friona is 324 road miles away, a 6.1 hour drive for planning. Hereford is 22.3 miles northeast and is the nearest larger city, but the Yukon distance remains part of planning mobilization for a Friona job. The route and work scope determine what equipment and crew setup is needed.

How much notice does Texas811 need before a bore on Friona’s 11th Street?

For a bore on 11th Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; it cannot be filed earlier than 14 days before work. For Friona work, if the start moves more than 14 days past the original notice, we submit a new request. Before work continues in Friona, we refresh worn or moved marks through Texas811.

What affects the cost of directional boring under US 60 in Friona?

The route and scope determine the price, with Friona’s Olton clay loam affecting reaming and fluid needs. Length, pipe or conduit size, utilities to expose, pavement, pits and drainage crossings also matter. Work beneath US 60 or BNSF Railway adds crossing considerations, while the 324 road miles from Yukon affect mobilization.

Where the Friona facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Friona

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Friona, Texas

Type the address of your job in Friona. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Friona

All counties: Texas county list.