trinityboringsolutions.com

Chilton Texas Directional Boring: Wilson Clay, US 77 and Deer Creek

Quick Answer: Can we get a line beneath US 77 without cutting the road? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Chilton and across Texas. The Yukon, Oklahoma main office is 320 road miles from Chilton, near Mooreville Road and the other local routes. Wilson silty clay loam and heavy clay dominate the mapped ground, so sticky cuttings and pressure under pavement need attention. We plan the bore path and drilling fluid around the crossing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Chilton bores at a glance

  • Unincorporated community in Falls County, Texas. Population 776 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 320 miles, about 6.2 hours of driving.
  • Ground: Wilson soil is mapped on 49 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: US 77, Texas State Highway 7 and FM 434. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Mooreville Road in Chilton?

Can we get a line beneath Mooreville Road without cutting the road? Yes, we take directional boring work in Chilton, an unincorporated community in Falls County. The Census Bureau counted 776 residents in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath Mooreville Road, 4001 or another local road to keep the surface crossing intact.

Our main office is in Yukon, Oklahoma, and Chilton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Chilton job along US 77 or Texas State Highway 7 is planned to suit its own crossing and line size.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Wilson soil like to bore through in Chilton?

The USDA soil survey maps Wilson soil across 49 percent of Chilton, including Wilson silty clay loam on mapped slopes. Branyon clay covers another 26 percent by soil series. At about 40 inches below the surface, clay is mapped across 91 percent of the area and silty clay across 8 percent; the average clay content there is 49 percent. These are mapped soil patterns, not test borings. The clay can cling to a reamer and grip pipe, so the route and drilling fluid need to suit the ground at the actual Mooreville Road crossing.

USDA soil survey, inside the Chilton mapped community boundaryWhat is mapped
Soil series mappedWilson 49 percent, Branyon 26 percent, Heiden 5 percent, Houston Black 5 percent and Burleson 4 percent
Texture at the surfacesilty clay loam 44 percent, clay 40 percent and silty clay 8 percent
Texture about 40 inches downclay 91 percent and silty clay 8 percent
Engineering class about 40 inches downfat clay (CH) 97 percent and lean clay (CL) 3 percent
Average clay content about 40 inches down49 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped in the top five feet across the mapped area, though that does not rule out deeper rock. The USDA soil survey maps seasonal water tables and flood prone soils across 4 percent each, so pits and creek approaches still need a site check. High steel corrosion risk is mapped across 99 percent, a concern for steel casing and tracer wire that the line owner should consider. The geologic map shows Wolfe City Sand of Late Cretaceous age, with sand and silt above calcareous mudstone.

How do we drill through Chilton clay?

Wilson soil and Branyon clay make Chilton a sticky ground job. We match fluid and reaming to the mapped clay, then check the actual route and marked lines before opening a bore near US 77 or Mooreville Road.

  1. In Wilson clay, we use a thinner drilling fluid with polymer and ream in stages to manage sticky cuttings and reduce the chance of the hole gripping the pipe.
  2. Because heavy clay is mapped around Mooreville Road, we watch fluid returns closely and keep pressure controlled beneath pavement to avoid lifting the surface.
  3. The survey maps seasonal water tables in 4 percent of Chilton, so we keep pits compact and plan for pumping if a route near Deer Creek is wet.
  4. Before drilling near a marked line on US 77, we hydrovac expose it and track the drill head from the surface, logging depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in Chilton near US 77?

US 77 runs through 2.3 mapped roadway miles inside Chilton, while Texas State Highway 7 covers 3.7 miles and FM 434 covers 1.5. TxDOT lists no other highways within 1.5 miles outside the mapped community boundary. Mooreville Road is the longest named street at 2.3 miles, followed by 4001 at 0.76 miles and Mooreville Road (County Road 493) at 0.72 miles. A bore route can pass beneath road pavement rather than cut across it, subject to the applicable road approval.

CrossingTypeMapped extentWho has a say
US 77US highway2.3 roadway miles insideState highway office
Texas State Highway 7State highway3.7 roadway miles insideState highway office
FM 434State highway1.5 roadway miles insideState highway office
Deer CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Post Oak CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cow BayouStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Chilton or within one mile outside the community boundary, and no mapped street and rail crossings are shown. Deer Creek runs along or touches the boundary; Post Oak Creek is 0.4 miles away and Cow Bayou is 0.9 miles away. One mapped street crossing of a named stream is inside the community, and 9.05 miles of unnamed drainage are mapped there. Creek work is checked for Corps jurisdiction during planning.

Whose permission does a Chilton bore in Falls County need?

Chilton is unincorporated, so it has no city government; local streets and their permits belong to Falls County or the state. For work in the right of way of US 77, Texas State Highway 7 or FM 434, the line owner applies through TxDOT RULIS, and the TxDOT Waco District reviews it. We prepare the bore plan and profile for the owner to submit, then work under its permit. For a highway crossing, cover depth depends on the line: electric and communication lines need 60 inches, water needs 60 inches and pressurized sewer needs 60 inches below the lowest crossed grade. A Deer Creek crossing is also checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in Falls County near Chilton?

The water provider for a specific Chilton address must be confirmed with Falls County or the local water district before a bore is planned; public water records do not identify a provider for this place. Electric utilities reporting service in Falls County are Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. We confirm which owner serves the address before planning an electric conduit bore near 4001 or US 77.

Line ownerWhat it isSourceSize
Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Falls CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Chilton housing at a median build year of 1966: 43 percent was built before 1960, 52 percent from 1960 to 1999 and 5 percent in 2000 or later. That mix can mean either replacement work or a new service near Mooreville Road. Before drilling close to a marked water or electric line, we use hydrovac potholing to expose it; surface marks show position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Chilton from Lott and the Yukon yard?

Chilton is in western Falls County at an elevation of 453 feet, covering 3.95 square miles in ZIP code 76632. Golinda is 5.7 miles north, and Lott is 5.7 miles south. Marlin, the county seat and nearest larger city, is 10.0 miles east. Lorena is 11.1 miles northwest and Bruceville-Eddy is 11.7 miles west. From the Yukon, Oklahoma main office, the road distance is 320 miles and the drive is 6.2 hours, which affects mobilization for work along US 77 or Mooreville Road.

Places near Chilton

What would we bore near 4001 in Chilton?

  • Highway crossing: A bore beneath US 77 keeps the line below the road surface, with the utility owner arranging the TxDOT right of way permit.
  • Street service: A water or sewer line along Mooreville Road can pass beneath pavement and driveways without an open cut across the route.
  • Electric conduit: Near 4001, we first confirm the address line owner among the utilities reporting service in Falls County.
  • Fiber route: A fiber bore near Texas State Highway 7 can use staged reaming to manage Chilton clay while keeping the road surface intact.
  • Creek approach: At Deer Creek, the route needs a site review and a check for Corps jurisdiction before a crossing is planned.
  • Drainage crossing: Unnamed drainage mapped across Chilton can affect pit placement and the bore path, so we review the route before quoting.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Deer Creek in Chilton?

For a Chilton quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Include whether the route is near Deer Creek, US 77 or Mooreville Road. That lets us review the crossing and access before we work out the bore plan.

The route, ground and access all shape a Chilton price. Wilson clay can call for staged reaming and careful fluid control; a crossing beneath US 77 brings highway planning into the scope. We also account for line size and length, marked utilities to expose, pavement, creek or drainage crossings, pits, excavator time and backfill. The 320 road miles from Yukon can affect mobilization, while emergency timing or a high profile route can change the work plan.

Questions people ask about boring in Chilton

Does Trinity take directional boring jobs in Chilton and Falls County?

Yes. We take directional boring work in Chilton and across Texas, with Trinity managing the job from the first call through the bore log. Our crews or vetted drilling partners can handle a route near Mooreville Road or US 77. The work is staffed through that model, not from a local Chilton office.

Do older Chilton lines near 4001 need replacement bores?

They may. The American Community Survey 2019 to 2023 estimates put the median housing year at 1966, with 43 percent of homes built before 1960. A bore near 4001 might serve a replacement line or a newer connection; the address, existing utility marks and the line owner help determine the route.

Does Wilson soil in Chilton corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Chilton, so steel casing and tracer wire need consideration. HDPE does not carry that steel corrosion concern. The line owner selects suitable materials and coatings for a bore near Mooreville Road or another local route.

What ground does a Chilton bore pass through in Wilson soil?

The USDA soil survey maps Wilson soil across 49 percent of Chilton, with clay mapped at about 40 inches below the surface across 91 percent of the area. Sticky clay can ball on a reamer and grip pipe. Those mapped patterns are not test borings, so the actual conditions along 4001 still need to guide the bore.

Will a bore in Chilton hit rock?

Bedrock is not mapped in the top five feet of Chilton, but that does not rule out rock deeper down. The geologic map shows Wolfe City Sand of Late Cretaceous age, with sand, silt and lower calcareous mudstone. A route near Deer Creek still needs planning for conditions found at the bore site.

Who approves a Chilton bore under US 77?

For work in the US 77 right of way, the utility owner applies through TxDOT RULIS, and the TxDOT Waco District reviews the application. The owner submits the bore plan and profile; we work under the permit issued to that owner. Required cover depends on the line and the permit conditions.

How early do I need to request Chilton locates near Mooreville Road?

Texas811 needs the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and not more than 14 days ahead. A ticket has a 20 day life. If the start slips more than 14 days past the original notice, request a new one; refresh worn or moved marks through Texas811 before work continues near Mooreville Road.

Does the distance from Marlin change a Chilton job from Yukon?

Marlin is 10.0 miles east of Chilton, while the Yukon, Oklahoma main office is 320 road miles away. That distance can affect mobilization for a bore near US 77. We consider the route, equipment and site access when planning the work, rather than treating every Chilton job as the same trip.

What affects the cost of a Chilton bore under US 77?

Length, pipe or conduit size, soil, utility crossings and pavement all affect the scope. Near US 77, the highway permit and crossing plan matter; Wilson clay can affect reaming, and Deer Creek or drainage can add crossing work. Pits, excavator time, backfill, emergency timing and the 320 road miles from Yukon can also change the job.

Where the Chilton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Chilton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Chilton, Texas

Type the address of your job in Chilton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Chilton

Same county: Rosebud. All counties: Texas county list.