Ellinger Texas Directional Boring: Wilson Clay, Ellinger Branch And Texas State Highway 71
Quick Answer: Wilson clay loam is Ellinger’s main mapped soil, and sticky clay can ball on a reamer and grip pipe. We do directional boring, also called horizontal directional drilling (HDD), for work near Ellinger Branch and across Texas. The Yukon main office is 433 road miles away, a factor for work on Grover Street. Staged reaming and a same day pull help manage the clay.
Ellinger bores at a glance
- Incorporated city in Fayette County, Texas. Population 296 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 433 miles, about 8.6 hours of driving.
- Ground: Wilson soil is mapped on 42 percent of the area, with silty clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: Texas State Highway 71 and FM 2503. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Ellinger Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Ellinger Branch?
Wilson clay loam is common around Ellinger, so the drilling plan has to account for clay that can cling to tooling. We take directional boring work in Ellinger near Ellinger Branch and across Texas. The Census Bureau Vintage 2024 estimate puts the city’s population at 296. We install water, sewer, gas, electric conduit and fiber lines beneath places such as Grover Street, where a bore can avoid cutting the roadway.
Our main office is in Yukon, Oklahoma, and Ellinger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters when planning around buried lines near Munn Street. Bluebonnet Electric Cooperative and Fayette Electric Cooperative report service in Fayette County, though the line owner at an Ellinger address must be confirmed.

How does Wilson soil affect a bore in Ellinger?
The USDA soil survey maps Wilson clay loam across 42 percent of Ellinger and Crockett loam across 26 percent. At about 40 inches below the surface, silty clay is mapped across 42 percent and clay across 37 percent; average clay content there is 41 percent. Wilson and Crockett soil series are mapped patterns, not test borings, so we verify subsurface conditions before planning work. That much clay can make the hole sticky, build up on a reamer and grip the pipe. We plan staged reaming and keep the pull moving once the hole is ready.
| USDA soil survey, inside the Ellinger city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 42 percent, Crockett 26 percent, Hallettsville 16 percent, Straber 12 percent and Degola 4 percent |
| Texture at the surface | clay loam 42 percent, loam 29 percent and fine sandy loam 17 percent |
| Texture about 40 inches down | silty clay 42 percent, clay 37 percent and sandy clay loam 19 percent |
| Engineering class about 40 inches down | lean clay (CL) 61 percent and fat clay (CH) 37 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (0 percent hard rock, 26 percent weathered rock) |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 70 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches in 26 percent of the area, with typical bedrock depth at 53 inches. A seasonal water table within 60 inches is mapped in 2 percent, and flood prone soils cover 4 percent. High steel corrosion risk is mapped across 70 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The geologic map unit is alluvial clay, silt, sand, and gravel of Pleistocene age, a mixed deposit that can change along a bore.
How do we bore silty clay in Ellinger?
Ellinger’s mapped silty clay and Wilson clay loam call for control of fluid, reaming and pull timing. We track the drill head from the surface and log depth and pitch as the route advances.
- In Wilson clay loam, we use staged reaming to manage sticky cuttings, then pull the pipe the same day the hole is opened so clay has less time to grip it.
- Because clay is mapped at 40 inches across 37 percent of Ellinger, we watch fluid returns and keep pressure controlled near Grover Street pavement.
- We expose marked utilities along an Ellinger route with hydrovac potholing before the drill approaches; paint on Munn Street indicates position, not depth.
- At Ellinger Branch, we plan below the channel and check jurisdiction during planning, while tracking drill depth and pitch from the surface.

What might a bore cross near Grover Street in Ellinger?
Texas State Highway 71 runs 1.1 mapped roadway miles inside Ellinger, and FM 2503 runs 0.6 miles. A bore beneath either route needs a plan that respects the roadway and its right of way. Among local streets, Grover Street extends 0.63 miles, Munn Street 0.61 miles and Tobias Road 0.57 miles. Fordtrand Street adds another named route to consider when laying out a service. The route and access determine where entry and exit pits can sit without cutting the street.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 71 | State highway | 1.1 roadway miles inside | State highway office |
| FM 2503 | State highway | 0.6 roadway miles inside | State highway office |
| Ellinger Branch | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dutys Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Pettys Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Ellinger or within one mile outside its limits, so the mapped street and rail crossing count is none. Ellinger Branch runs 0.31 channel miles through the city, and two street crossings of named streams are mapped. Unnamed drainage adds 0.83 miles. A proposed crossing at Ellinger Branch needs a channel plan, and creek jurisdiction is checked during planning. No lakes or ponds are mapped within one mile of Ellinger, so we focus waterway reviews on nearby Dutys Creek.
Who approves work near Texas State Highway 71 in Ellinger?
Texas State Highway 71 and FM 2503 are state routes in Ellinger, so work in their right of way needs a TxDOT utility permit. The county facts place Ellinger in the TxDOT Yoakum District, which reviews the application. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with rural crossings extending below all travel lanes. Ellinger’s city streets belong to the city itself. A crossing of Ellinger Branch is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is known about utility lines in Fayette County near Ellinger?
EPA drinking water records do not connect a water provider to Ellinger by town name. The water provider for a specific address has to be confirmed with the city, Fayette County or the local water district before a bore is planned. Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric Cooperative report service in the county. That does not identify the electric line owner at every Ellinger address, so the owner must be confirmed before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric Cooperative | Electric utilities reporting service in Fayette County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Ellinger’s median housing year at 1975, so we plan underground work with utility coordination in Fayette County. It estimates 28 percent of homes were built before 1960, 50 percent from 1960 to 1999 and 22 percent in 2000 or later. A replacement line near Munn Street may need a different route from a new service. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

How far is Ellinger from Giddings and nearby towns?
Ellinger is in Fayette County, at an elevation of 286 feet, and covers 0.45 square miles. Fayetteville is 5.1 miles north, Weimar is 10.4 miles southwest, La Grange is 11.5 miles northwest, Glidden is 12.0 miles southeast and Columbus is 12.9 miles southeast. La Grange is the county seat; Giddings, the nearest larger city, is 27.4 miles northwest. The public records used here do not provide ZIP codes. From the Yukon main office, the drive is 433 road miles and 8.6 hours, which affects mobilization for an Ellinger job.
Places near Ellinger
- Directional boring in Fayetteville: 5.1 miles north
- Directional boring in Weimar: 10.4 miles southwest
- Directional boring in La Grange: 11.5 miles northwest
- Directional boring in Glidden: 12 miles southeast
- Directional boring in Columbus: 12.9 miles southeast
- Directional boring in Giddings: 27.4 miles northwest
What boring work could come up near Munn Street in Ellinger?
- Highway crossing: A bore beneath Texas State Highway 71 needs a route and profile suited to the highway right of way and pavement.
- Street service: A service near Grover Street can be installed below the roadway, with pits placed to avoid cutting the street.
- Creek crossing: A proposed line beneath Ellinger Branch needs channel depth planning and a jurisdiction check during planning.
- Water line: We can plan a replacement or new water line near Tobias Road after confirming the provider for the specific address.
- Electric conduit: Before planning conduit near Munn Street, we confirm the line owner among the utilities reporting service in Fayette County.
- Fiber route: A fiber bore along Fordtrand Street can be scoped around marked utilities and the mapped Wilson clay.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Fordtrand Street in Ellinger?
For an Ellinger quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. The route near Fordtrand Street can change the work area and pit placement. A map also helps us see whether the proposed line approaches Texas State Highway 71 or Ellinger Branch before we scope the bore.
The price follows the route and work involved. Wilson clay can add reaming and fluid control; a crossing at Texas State Highway 71 brings right of way requirements, while Ellinger Branch adds a creek crossing to plan. We also account for line size and length, utilities to expose, pavement or concrete, pits, excavator time and sand backfill. At 433 road miles from Yukon, mobilization is another part of the Ellinger job scope, especially for high profile or emergency work.
Questions people ask about boring in Ellinger
Does Trinity take directional boring jobs in Ellinger and Fayette County?
Yes. We take work in Ellinger and across Texas, with crews of our own and partner contractor crews from vetted satellite yards. Our main office is in Yukon, Oklahoma, with Ellinger 433 road miles away for project coordination. For a route near Grover Street, we stay involved from the first call through the bore log, whichever crew is on site.
Who should we contact at TxDOT Yoakum District for approval of a bore under Texas State Highway 71 in Ellinger?
TxDOT reviews a utility permit for work in the right of way of Texas State Highway 71. Ellinger is in the TxDOT Yoakum District. The utility owner files through RULIS, and we prepare the bore plan and profile for its application. Existing highway pavement is bored or tunneled beneath, rather than trenched through.
Can a line be bored under Ellinger Branch in Ellinger?
A line can be planned beneath Ellinger Branch, subject to the route and channel conditions. The stream runs 0.31 channel miles within Ellinger, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We also consider the mapped stream crossings and drainage along the proposed path.
Which electric company owns lines at an Ellinger address in Fayette County?
The specific owner has to be confirmed for the address. Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric Cooperative report electric service in Fayette County, but that does not establish who serves every address. Before an electric conduit bore near Munn Street, confirm the line owner and its conduit requirements.
Who controls Tobias Road in Ellinger, and does a bore require cutting it?
Tobias Road is a city street, so it belongs to the city itself. Directional boring can place a line beneath the street without opening a trench through the roadway. The entry and exit pits still need room off the travel surface, and marked utilities must be exposed before drilling near them.
What do Ellinger homes near Munn Street tell us about replacement bores?
The American Community Survey 2019 to 2023 estimates a median housing year of 1975, with 28 percent of homes built before 1960. Older housing can mean a replacement route differs from a new service, but the survey does not establish pipe age. Near Munn Street, we check the route and expose marked lines before drilling.
Does Trinity cover Fayetteville and rural sites outside Ellinger?
Yes. We take work in Ellinger, nearby Fayetteville and rural Texas sites outside city limits. Fayetteville is 5.1 miles north of Ellinger. For work beyond the city streets, the route, access and the authority responsible for any road right of way must be considered in the bore plan.
How much notice does Texas811 need for a bore near Grover Street in Ellinger?
Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from the planned start near Grover Street. A request cannot be made more than 14 days ahead; if the start slips over 14 days beyond the original notice, make a new request. Before work continues along Grover Street, we have worn or moved marks refreshed through Texas811.
What affects the cost of directional boring under Texas State Highway 71 in Ellinger?
The route, footage, pipe or conduit size, Wilson clay, pavement, utilities to expose, pits and equipment time all affect the scope. A Texas State Highway 71 crossing brings permit planning, and a route near Ellinger Branch can add creek considerations. Mobilization also reflects the 433 road miles from the Yukon main office.
Where the Ellinger facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ellinger
- U.S. Census Bureau, TIGER/Line 2024: Ellinger boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Ellinger
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ellinger housing units and year built
- Macrostrat geologic map compilation: map units under Ellinger
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fayette County
- U.S. Geological Survey, Elevation Point Query Service: Ellinger elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ellinger
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ellinger
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ellinger, Texas
Type the address of your job in Ellinger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ellinger
Same county: Schulenburg · Flatonia · Carmine · Round Top · Plum. All counties: Texas county list.
