trinityboringsolutions.com

Glidden Texas Directional Boring: Wilson Clay Loam, Interstate 10 and Ratliff Creek

Quick Answer: Interstate 10 is a main crossing to plan around for directional boring in Glidden, also called horizontal directional drilling (HDD). The mapped community is 446 road miles from our Yukon, Oklahoma main office, so distance and access affect mobilization for work near US 90. Wilson clay loam covers 33% of the mapped area. Clay deeper down can cling to the reamer, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Glidden bores at a glance

  • Unincorporated community in Colorado County, Texas. Population 741 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 446 miles, about 8.8 hours of driving.
  • Ground: Wilson soil is mapped on 33 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 10, US 90 and FM 2434. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Glidden near Union Pacific?

Interstate 10 is a major route to consider when planning utility work in Glidden, Colorado County. The Census Bureau counted 741 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, with routes planned along streets such as Front Street or across a highway where the line needs to go.

Our main office is in Yukon, Oklahoma, and Glidden work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a Glidden bore is scoped around its particular street, ground and crossing, such as the Union Pacific boundary.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Glidden and Wilson soil?

The USDA soil survey maps Wilson clay loam on 33% of Glidden, the largest listed map unit. At about 40 inches down, sandy clay loam is mapped under 33% of the area, clay under another 33%, and clay loam under 18%. The survey also maps 66% of the area in heavy clay at that depth and 14% as sandy. These are mapped patterns, not test borings. A route near Garden Oaks Drive still needs field checks because the soil can change along the bore.

USDA soil survey, inside the Glidden mapped community boundaryWhat is mapped
Soil series mappedWilson 33 percent, Straber 29 percent, Nez 19 percent, Milby 14 percent and Tremona 4 percent
Texture at the surfaceclay loam 33 percent, loamy sand 19 percent and very gravelly loamy fine sand 18 percent
Texture about 40 inches downsandy clay loam 33 percent, clay 33 percent and clay loam 18 percent
Engineering class about 40 inches downfat clay (CH) 66 percent and clayey sand (SC) 33 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches37 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA map places no bedrock within 60 inches in Glidden, which means it shows no shallow bedrock layer to plan around, not that deeper rock is absent. A seasonal water table is mapped within 40 inches on 37% of the area, so pits may need pumping. Flood prone soils are not mapped. High steel corrosion risk covers 70%, a concern for uncoated casing or tracer wire. The geologic map lists Terrace deposits of Cenozoic age, with sand, silt, clay and gravel in varying proportions.

What does it take to bore Glidden sandy clay loam?

Glidden has both sandy clay loam and heavy clay mapped around 40 inches deep. We adjust the drilling fluid and reaming sequence to the ground along the route, rather than treating every street as the same soil.

  1. On Wilson clay loam, we use a fluid mix suited to sticky clay and ream in stages so material does not pack onto the reamer.
  2. Where Glidden’s deeper map shows heavy clay, we watch fluid returns closely and keep pressure controlled to avoid lifting pavement along streets such as Taylor Street.
  3. With sandy clay loam mapped at about 40 inches, we prepare the pipe before the final ream so the hole is ready for the pull.
  4. Where seasonal water is mapped within 40 inches, we keep pits small and pump them as needed, especially near a route toward Ratliff Creek.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Glidden near Ratliff Creek?

Interstate 10, US 90 and FM 2434 pass inside Glidden’s mapped community boundary, while Texas State Highway 71 runs along or touches it. A TxDOT crossing needs a plan for the highway right of way and travel lanes. Among the named streets, Schulenburg Lane runs 0.62 miles inside the community; Front Street and Garden Oaks Drive each run 0.47 miles. Taylor Street runs 0.46 miles. Their lengths help locate a route, but the actual bore path depends on the service connection and marked utilities.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate0.8 roadway miles insideState highway office
US 90US highway2.2 roadway miles insideState highway office
FM 2434State highway1 roadway miles insideState highway office
Texas State Highway 71Highway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Ratliff CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad runs inside Glidden, but Union Pacific runs along or touches the mapped boundary. No street and rail crossings are mapped inside the community; a proposed track crossing still needs the railroad’s agreement. Ratliff Creek is 0.3 miles away, and no named stream runs inside Glidden. No street crossings of named streams are mapped here. The map also shows 0.08 miles of unnamed drainage inside the community, so a route near it needs a site specific review.

Do I need a permit to bore in Glidden, Colorado County?

Interstate 10, US 90 and FM 2434 are roads where work in the right of way needs a TxDOT utility permit; Texas State Highway 71 also runs along or touches Glidden’s mapped boundary. The TxDOT Yoakum District reviews the application. The utility that owns the line files it in TxDOT’s RULIS system, and we prepare the bore plan and profile for work under that owner’s permit. Glidden is an unincorporated community with no city government, so local street approval belongs to the county rather than a city office. A Union Pacific crossing needs an agreement with the railroad. Ratliff Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Glidden in Colorado County?

The water provider for a specific Glidden address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie a system to this community, and no system carrying Glidden’s name could be matched. For electric service reported in Colorado County, the utilities are AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative. The actual line owner must be confirmed before an electric conduit bore is planned.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Colorado CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Glidden’s median housing year at 1986; 6% of units were built before 1960, and 19% in 2000 or later. That age mix can mean either replacement work or a new service, so the route under Front Street cannot be assumed clear. We hydrovac pothole each marked utility on the bore path before drilling near it. For example, a planned crossing beneath Front Street needs the marked lines exposed first because paint does not show their depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Glidden in relation to Columbus?

Glidden is in Colorado County, at an elevation of 238 feet across 0.99 square miles. Its ZIP codes are 78943 and 78934. Columbus, the county seat, is 1.9 miles east; Weimar is 11.4 miles west, and Ellinger is 12.0 miles northwest. Rock Island is 12.7 miles south, while Sheridan is 13.8 miles south. Sealy is the nearest larger city listed, 25.9 miles east. The drive from our Yukon, Oklahoma main office is 446 road miles and 8.8 hours, which is part of mobilization planning for a Glidden job.

Places near Glidden

What kinds of bores come up on Glidden’s Schulenburg Lane?

  • Highway crossing: A bore beneath Interstate 10 stays below the travel lanes, with the route and depth set through the utility owner’s TxDOT permit.
  • Water service: A connection near Front Street starts with confirming the address’s water provider and locating any existing lines along the route.
  • Fiber drop: A fiber route along Schulenburg Lane can be installed below the surface without cutting the street pavement.
  • Creek crossing: A route toward Ratliff Creek needs a channel crossing plan and a check for federal jurisdiction during planning.
  • Rail crossing: A proposed line near the Union Pacific boundary needs the railroad’s crossing agreement and its requirements for casing, depth and flagging.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Glidden quote near Taylor Street?

For a Glidden quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help show the route near Taylor Street. That gives us a starting layout to review against the marked utilities, surface conditions and any highway, drainage or railroad crossing.

The main cost driver in Glidden is the ground: Wilson clay loam and heavy clay at about 40 inches can call for careful fluid control and staged reaming. Next, the number of utilities to expose and any crossing of Interstate 10 or Union Pacific can add work. Concrete or pavement, pits, excavator time and sand backfill also affect the scope. At 446 road miles from Yukon, mobilization matters too. Emergency or high profile work can change the planning and crew needs.

Questions people ask about boring in Glidden

Does Trinity Boring Solutions take Glidden jobs in Colorado County, and who does the work?

Yes. We take directional boring work in Glidden, Colorado County, and handle the job from planning through the bore log. Our crews do the work, with support from satellite yards run by drilling contractors we have personally vetted. The work may include a route near US 90 or a service connection along Front Street.

Can a utility line be bored beneath Ratliff Creek near Glidden?

A bore may be planned beneath Ratliff Creek if the site, ground and crossing requirements support it. The creek is 0.3 miles from Glidden’s mapped boundary, and the route needs a review for federal jurisdiction during planning. We also check access and choose a path that keeps the creek bank and channel uncut.

Who owns electric lines in Glidden, Colorado County, and who confirms conduit details?

The specific electric line owner has to be confirmed before a conduit bore is planned. AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative report service in Colorado County, but that does not identify the provider at every Glidden address. The line owner confirms conduit specifications for its system.

Who is responsible for Garden Oaks Drive in Glidden, and must it be cut?

Glidden is unincorporated and has no city government, so Garden Oaks Drive is not under a city street department. Street approval belongs to the county, while state roads fall under TxDOT. A directional bore can pass beneath the street without cutting its surface when the route and approvals allow it.

Do older buried lines near Front Street in Glidden affect replacement bores?

They can affect the route and the amount of locating and exposure needed. The American Community Survey 2019 to 2023 estimates put Glidden’s median housing year at 1986, with 6% of units built before 1960. A replacement bore near Front Street needs marked utilities exposed before drilling close to them, since paint does not show depth.

Could groundwater near Ratliff Creek fill bore pits in Glidden?

It could at some locations. The USDA soil survey maps a seasonal water table within 40 inches on 37% of Glidden, so pits may need pumping. Ratliff Creek is nearby, but flood prone soils are not mapped in the community. We check the actual pit location and ground rather than treating the map as a site test.

Does Trinity cover Columbus and rural locations outside Glidden?

Yes. We take work across Texas, including Columbus and rural sites beyond Glidden’s mapped community boundary. Columbus is 1.9 miles east and is the Colorado County seat. Each location still needs its own route, utility marks and access review, whether the bore follows US 90 or serves a site outside the community.

How far ahead should I call 811 for a Glidden bore on Schulenburg Lane?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. A ticket for Schulenburg Lane has a 14 day window; if the start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near Interstate 10 in Glidden?

The job’s length, pipe or conduit size and Glidden ground all matter. Wilson clay loam and heavy clay can affect drilling time; utilities to expose, pavement, pits and backfill add scope. A crossing near Interstate 10 needs highway planning, while the 446 road miles from Yukon affect mobilization. The route and site conditions determine the work involved.

Where the Glidden facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Glidden

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Glidden, Texas

Type the address of your job in Glidden. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Glidden

Same county: Eagle Lake · Garwood · Nada. All counties: Texas county list.