trinityboringsolutions.com

Kirvin Texas Directional Boring: Crockett Soil, FM 80 And BNSF Railway

Quick Answer: Kirvin is an incorporated town, so its public streets, including Sessions Street, belong to the town. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for routes near BNSF Railway track. The jobsite is 301 road miles from our Yukon yard, a mobilization factor for work on FM 80. Crockett soil has a fine sandy loam surface and clay below, where sticky cuttings can load a reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kirvin bores at a glance

  • Incorporated city in Freestone County, Texas. Population 107 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 301 miles, about 6 hours of driving.
  • Ground: Crockett soil is mapped on 74 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 74 percent of the area.
  • Highways inside the boundary: FM 80 and FM 1449. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Public water: City of Kirvin, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near BNSF Railway in Kirvin?

Kirvin is an incorporated town in Freestone County, so its town streets belong to the town. With the Census Bureau Vintage 2024 estimate putting Kirvin at 107, we plan underground work around each route, not a townwide assumption. We install water, sewer, gas, electric conduit and fiber where routes run along Sessions Street or cross FM 80; the route and line owner help determine the bore plan.

Our main office is in Yukon, Oklahoma, and Kirvin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982; in Kirvin, we apply that experience to route planning. For a Kirvin route near BNSF Railway track, our range runs from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Crockett soil affect a directional bore in Kirvin?

The USDA soil survey maps Crockett soil across 74% of Kirvin, with fine sandy loam at the surface across the mapped area. At about 40 inches below the surface, clay is mapped under 76% of the area, and clay loam under 12%; the average clay content there is 41%. For planning in Kirvin, these are mapped patterns, not test borings, so we treat them as context rather than confirmed conditions. The clay rich layer can hold a bore open, but sticky cuttings may build on the reamer and swell against pipe. We plan the fluid and reaming sequence around that behavior.

USDA soil survey, inside the Kirvin city limitsWhat is mapped
Soil series mappedCrockett 74 percent, Edge 19 percent and Gasil 6 percent
Texture at the surfacefine sandy loam 100 percent
Texture about 40 inches downclay 76 percent, clay loam 12 percent and sandy clay loam 12 percent
Engineering class about 40 inches downfat clay (CH) 76 percent and lean clay (CL) 24 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches74 percent of the area (0 percent hard rock, 74 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel76 percent of the area

The soil survey maps weathered bedrock within 60 inches across 74% of Kirvin, with typical bedrock depth at 53 inches; hard bedrock is not mapped within that depth. A bore may slow as it reaches weathered material. Seasonal water tables within 60 inches are mapped across 2% of the town, and flood prone soils are not mapped. High steel corrosion risk is mapped across 76%, so the line owner should consider steel casing and tracer wire materials. The Cenozoic Clayey sand and sandy clay decomposition residuum includes clay, sand and sandstone, which can mean changing ground along a route.

How do crews handle clay on a Kirvin bore?

Crockett soil is fine sandy loam over clay rich ground in Kirvin. We adjust drilling fluid and reaming to keep sticky cuttings moving without building pressure beneath FM 80 pavement.

  1. Crockett soil has clay rich layers at about 40 inches, so we use thinner fluid and polymer and ream in stages to manage sticky cuttings.
  2. Because heavy clay is mapped across 88% of Kirvin at about 40 inches, we watch fluid returns near FM 80 so pressure does not lift pavement.
  3. Before the drill approaches any marked line along Sessions Street, we hydrovac pothole to expose it; surface paint shows position, not depth.
  4. We track the drill head from the surface and log depth and pitch on routes near BNSF Railway, keeping the bore path below the crossing.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross near Little Tehuacana Creek in Kirvin?

FM 80 has 1.0 mapped roadway mile inside Kirvin, and FM 1449 has 0.4. A bore beneath either state road needs a route planned around its pavement and right of way. Sessions Street is the longest named street at 0.75 miles; Main Street and Walnut Street each run 0.46 miles in town. The street network totals 6.21 public road centerline miles. A bore can pass below pavement rather than cut across it, with entry and exit pits placed off the traveled surface.

CrossingTypeMapped extentWho has a say
FM 80State highway1 roadway miles insideState highway office
FM 1449State highway0.4 roadway miles insideState highway office
BNSF RailwayRailroad0.66 track miles insideThe railroad
private or unidentified track (line shown as out of service)Railroad nearby0.9 miles outsideThe railroad
Little Tehuacana CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Grindstone CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 0.66 track miles in Kirvin, and public mapping shows 2 street and rail crossings. A route near the track needs coordination around the railroad crossing. No named stream runs inside town limits; Little Tehuacana Creek is 0.7 miles outside them, and Grindstone Creek is 0.9 miles away. No street crossings of named streams are mapped inside Kirvin, and no lakes or ponds are mapped within one mile. Drainage along a route still matters when placing bore pits.

Whose permission does a Kirvin bore in Freestone County need?

Kirvin is incorporated, so its town streets belong to the town, while work in FM 80 or FM 1449 right of way needs a TxDOT utility permit reviewed by the TxDOT Bryan District. For electric and communication lines crossing a highway, the stated cover is at least 60 inches below the lowest point of the crossed grade, or 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer needs 60 inches at crossings. The utility owner applies through RULIS, and we prepare the bore plan and profile for its permit. A BNSF Railway crossing needs an agreement with the railroad. If a route reaches Little Tehuacana Creek, planning checks for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Kirvin system?

The City of Kirvin public water system uses groundwater wells and reports 183 service connections serving 549 people. That gives a water route a local system to account for, but the line owner still needs to be identified along a proposed path near Walnut Street. Utilities reporting electric service in Freestone County are Oncor Electric Delivery Company, Houston County Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. We confirm the line owner for an electric conduit bore rather than assuming one provider serves every address.

Line ownerWhat it isSourceSize
City of KirvinPublic water systemGroundwater wells183 connections, 549 people served
Oncor Electric Delivery Company, Houston County Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Freestone CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Kirvin’s median housing year at 1988: 25% of units were built before 1960, 48% from 1960 to 1999 and 27% in 2000 or later. That mix can mean either replacement work or new service runs along Walnut Street. Before drilling near a marked line, we expose it with hydrovac potholing because paint shows position, not depth. For example, a proposed bore under Walnut Street needs marked utilities exposed along its path.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Kirvin in relation to Mexia and nearby towns?

Kirvin is in Freestone County, at an elevation of 460 feet, and covers 0.4 square miles. We use Kirvin’s ZIP codes, 75848, 75859 and 76693, as location references, not as substitutes for checking the underground route. Wortham is 7.9 miles west, Streetman is 7.9 miles north, Teague is 9.9 miles south, and Fairfield is 10.0 miles east. Fairfield is the county seat; Mexia, the nearest larger city, is 10.8 miles southwest. The route from our Yukon yard is 301 road miles and a 6.0 hour drive, which affects mobilization for a bore in Kirvin.

Places near Kirvin

What boring work comes up near Sessions Street in Kirvin?

  • Highway crossing: A bore beneath FM 80 keeps the route under pavement, with pits placed beyond the traveled surface.
  • Water service: A service route near Walnut Street can connect toward the City of Kirvin groundwater system after the line owner is confirmed.
  • Fiber route: A fiber bore along Sessions Street can run below pavement and sidewalks without opening a trench across the street.
  • Rail crossing: A route beneath BNSF Railway track needs the railroad agreement and a crossing plan that follows its conditions.
  • Drainage crossing: A bore approaching Little Tehuacana Creek needs its channel and possible Corps jurisdiction considered during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Kirvin bore near FM 80?

For a Kirvin quote, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help us assess a route near FM 80. The route also tells us whether the work approaches BNSF Railway, a paved street or local drainage, details that change the equipment and plan.

Crockett clay is the first price factor because sticky cuttings can require staged reaming and careful fluid control. Length and pipe size shape the equipment and time; BNSF Railway crossings and FM 80 pavement add coordination or crossing work. Marked utilities that need exposure, concrete, creek or drainage crossings, pits, excavator time and sand backfill also affect the scope. Mobilization reflects the 301 road miles from Yukon, while emergency or high profile work can require added planning.

Questions people ask about boring in Kirvin

Does Trinity take directional boring jobs in Kirvin and Freestone County?

Yes. We take directional boring work across Texas, including routes in Freestone County near FM 80 or BNSF Railway. Our main office is in Yukon, and Kirvin work is staffed with our own crews and from satellite yards run by vetted partner drilling contractors. You work with Trinity through the bore log.

Can Crockett soil in Kirvin corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 76% of Kirvin, much of it covered by Crockett soil. The line owner should weigh casing and tracer wire materials for a route near Walnut Street. HDPE is not affected by that mapped soil corrosion concern; the owner chooses any coating for steel.

What ground does a bore pass through in Kirvin’s Crockett soil?

Crockett soil is mapped across 74% of Kirvin, with fine sandy loam at the surface. At about 40 inches down, clay is mapped under 76% of the area and the average clay content is 41%. Those USDA soil survey patterns suggest sticky cuttings along a bore near Sessions Street, not site specific test results.

Is there rock near the surface for a directional bore in Kirvin?

Weathered bedrock is mapped within 60 inches across 74% of Kirvin, with typical bedrock depth at 53 inches. In Kirvin, hard bedrock is not mapped within that depth, so we use the map as planning guidance rather than a confirmed bore condition. A route near FM 1449 may therefore meet weathered material and slow, even though the mapping does not indicate hard rock in the top five feet.

Who approves a bore under FM 80 in Kirvin?

A bore in FM 80 right of way needs a TxDOT utility permit reviewed by the TxDOT Bryan District. The utility owner submits the application through RULIS, and we prepare the bore plan and profile for work under the owner’s permit. Cover depends on the line type and crossing conditions.

Who owns the Kirvin rail track, and what does a BNSF Railway bore need?

BNSF Railway owns the 0.66 track miles mapped inside Kirvin. A bore under that track needs an agreement with the railroad; its conditions address casing, depth and flagging. The mapped street and rail crossings in town are another reason to confirm the exact route before planning a bore near Sessions Street.

Can I reach Trinity after hours about an urgent bore near Walnut Street in Kirvin?

Yes. Call (405) 409-7423; a person answers 24 hours a day. For an urgent issue near Walnut Street, tell us the location and what line or crossing is involved so we can understand the scope and response needed.

How much notice does Texas811 need for a Kirvin bore near Sessions Street?

Request the locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as at least two working days. A request cannot be made earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request, and have worn or moved marks refreshed through Texas811 before work continues near Sessions Street.

What affects the price of directional boring near FM 80 in Kirvin?

The job scope sets the price: Crockett clay, bore length and pipe size matter, as do utilities to expose, pavement, drainage crossings, pits and equipment time. A route beneath FM 80 or near BNSF Railway can add crossing work. Mobilization also reflects the 301 road miles between Kirvin and our Yukon yard.

Where the Kirvin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kirvin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kirvin, Texas

Type the address of your job in Kirvin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kirvin

Same county: Oakwood. All counties: Texas county list.