Crockett Texas Directional Boring: Kirvin Soil, Spring Creek and Union Pacific Track
Quick Answer: US 287 and Spring Creek are crossings we plan around when we take directional boring work in Crockett, Texas, also called horizontal directional drilling (HDD). Crockett is 361 road miles from our Yukon, Oklahoma main office, so the Union Pacific track and route details help us plan mobilization. Kirvin soil is common here, and clay deeper down can stick to a reamer and grip pipe. We adjust the drilling fluid and ream in stages to manage that ground.
Crockett bores at a glance
- County seat of Houston County, Texas. Population 6,387 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 361 miles, about 7.4 hours of driving.
- Ground: Kirvin soil is mapped on 17 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 44 percent of the area.
- Highways inside the boundary: US 287, Loop 304, Texas State Highway 7, Texas State Highway 21 and Texas State Highway 19. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
- Named streams inside the boundary: Spring Creek, Town Branch and Gail Creek.
- Public water: City of Crockett, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring on Crockett’s 4th Street?
Yes. We take directional boring work in Crockett and Houston County, where the Census Bureau Vintage 2024 estimate puts the population at 6,387. Our crews install water, sewer, gas, electric conduit and fiber; a bore can carry those lines beneath 4th Street or Houston Avenue while keeping the paved surface intact.
Our main office is in Yukon, Oklahoma, and Crockett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, directional boring has meant learning how to manage ground like Crockett’s clay below the sandy loam surface. Our family business started in 1965, and we bring that experience to routes near 4th Street and Spring Creek.

How does Kirvin soil affect a Crockett bore?
The USDA soil survey maps Kirvin fine sandy loam, 1 to 5 percent slopes, across 17 percent of Crockett. Fine sandy loam is the leading surface texture at 38 percent, but the profile changes with depth. At about 40 inches, clay is mapped across 91 percent of the area, with an average clay content of 45 percent. That deeper material can cling to a reamer and swell around pipe, so a bore near Kirvin soil needs a fluid and reaming plan suited to sticky ground.
| USDA soil survey, inside the Crockett city limits | What is mapped |
|---|---|
| Soil series mapped | Kirvin 17 percent, Etoile 16 percent, Woodtell 16 percent, Latex 12 percent and Cuthbert 11 percent |
| Texture at the surface | fine sandy loam 38 percent, loam 36 percent and very fine sandy loam 18 percent |
| Texture about 40 inches down | clay 91 percent, sandy clay loam 6 percent and fine sandy loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 80 percent, silt (ML) 11 percent and clayey sand (SC) 5 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 44 percent of the area (0 percent hard rock, 44 percent weathered rock) |
| Seasonal water table within 60 inches | 49 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 93 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 44 percent of Crockett, with typical bedrock depth at 47 inches; hard bedrock is not mapped within that depth. Seasonal water tables are mapped within 60 inches across 49 percent, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across 93 percent, so the line owner should consider casing and tracer wire materials; HDPE does not have that steel concern. The Cook Mountain Formation, of Bartonian age, includes claystone, sandstone and siltstone, so the bore plan may need to account for changing material.
How do we bore Crockett’s clay?
Crockett’s sandy loam surface and clay deeper down call for different handling as the bore advances. We track the drill head from above and adjust the reaming plan to the ground near Spring Creek and 4th Street.
- We expose each marked utility on the planned route with hydrovac before drilling near it; that matters on Crockett streets where surface paint cannot show line depth.
- With clay mapped at about 40 inches across most of Crockett, we use a thinner drilling fluid and ream in stages to limit sticky buildup.
- Clay can grip pipe as it swells, so we plan to pull the line the same day the open bore is made near Spring Creek.
- We watch fluid returns on Crockett’s clay routes and keep pressure in check so drilling fluid does not lift pavement near 4th Street.

Which roads, tracks or creeks might a Crockett bore cross near Spring Creek?
US 287, Loop 304, Texas State Highway 7 and Texas State Highway 21 run through Crockett, along with Texas State Highway 19 and several farm to market roads. The mapped longest named streets include 4th Street at 3.91 miles, Houston Avenue at 3.46 miles and Goliad Avenue at 3.09 miles. A bore beneath those paved routes avoids cutting across the surface. For highway right of way work, the alignment and line type determine the cover and permit details.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 287 | US highway | 3.8 roadway miles inside | State highway office |
| Loop 304 | State highway | 8.6 roadway miles inside | State highway office |
| Texas State Highway 7 | State highway | 4 roadway miles inside | State highway office |
| Texas State Highway 21 | State highway | 3.8 roadway miles inside | State highway office |
| Texas State Highway 19 | State highway | 3.7 roadway miles inside | State highway office |
| FM 2022 | State highway | 1.7 roadway miles inside | State highway office |
| FM 229 | State highway | 1.5 roadway miles inside | State highway office |
| FM 2076 | State highway | 1 roadway miles inside | State highway office |
| FM 2110 | State highway | 0.9 roadway miles inside | State highway office |
| FM 3313 | State highway | 0.3 roadway miles inside | State highway office |
| FM 3133 | State highway | 0.3 roadway miles inside | State highway office |
| FM 2712 | State highway | 0.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 5.43 track miles inside | The railroad |
| Spring Creek | Stream | 2.95 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 5.43 track miles in Crockett on the Palestine Subdivision, and public mapping shows 8 street and rail crossings in the city. A crossing needs an agreement with Union Pacific before the route is set. Spring Creek runs 2.95 channel miles in the city, and public mapping shows 13 street crossings of named streams. A creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning; no lakes or ponds are mapped within one mile.
Who approves Crockett bores in Houston County?
Crockett is an incorporated city, so its city streets belong to the city itself. For work in the right of way of US 287, Loop 304, state highways or farm to market roads, the line owner files the utility application in TxDOT’s online RULIS system. The TxDOT Lufkin District reviews it, and we prepare the bore plan and profile for the owner’s filing. TxDOT cover rules depend on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. The permit may set a different depth. A Union Pacific crossing also requires its railroad agreement, and Spring Creek is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground near the City of Crockett system?
The City of Crockett public water system uses purchased surface water and reports 3,304 service connections serving 7,755 people. For electric service in Houston County, utilities reporting to the EIA include Entergy Texas, Oncor Electric Delivery Company and Houston County Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near the City of Crockett system.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Crockett | Public water system | Surface water bought from another system | 3,304 connections, 7,755 people served |
| Entergy Texas, Oncor Electric Delivery Company and Houston County Electric Cooperative | Electric utilities reporting service in Houston County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Crockett’s median housing year at 1973. The estimates show 32 percent of homes built before 1960, 63 percent from 1960 to 1999 and 5 percent in 2000 or later. That mix can mean a project replaces older service lines as well as adds new connections. For a proposed line under 4th Street, we hydrovac pothole each marked utility on the bore path before drilling near it; surface marks show position, not depth.

What is near Crockett and Palestine for service?
Crockett is the incorporated county seat of Houston County, at an elevation of 359 feet and covering 8.85 square miles. Its ZIP code is 75835. Latexo is 5.3 miles north, Grapeland is 12.3 miles north, Lovelady is 13.1 miles south, Kennard is 16.2 miles east and Elkhart is 22.9 miles north. Palestine, the nearest larger city, is 32.2 miles north. From our Yukon yard, Crockett is 361 road miles and a 7.4 hour drive, which is part of planning mobilization for a job near US 287 or Spring Creek.
Places near Crockett
- Directional boring in Latexo: 5.3 miles north
- Directional boring in Grapeland: 12.3 miles north
- Directional boring in Lovelady: 13.1 miles south
- Directional boring in Kennard: 16.2 miles east
- Directional boring in Elkhart: 22.9 miles north
- Directional boring in Palestine: 32.2 miles north
Which jobs call for a bore near Crockett’s Houston Avenue?
- Highway crossing: A bore beneath US 287 keeps the paved route intact while the line passes below the traveled lanes.
- Water service: A connection near the City of Crockett system can be routed below Houston Avenue without opening a trench across the street.
- Fiber conduit: A conduit run along Goliad Avenue can link properties while avoiding an open cut through the paved corridor.
- Creek crossing: A line routed beneath Spring Creek avoids cutting the creek bank, with the crossing checked for federal jurisdiction during planning.
- Rail crossing: A utility route beneath Union Pacific track needs the railroad’s agreement, with crossing conditions settled before the bore is planned.
- Street utility: For a line proposed beneath 4th Street, we hydrovac each marked utility on the bore path before the drill approaches it.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Crockett bore under US 287?
Start with a map pin or address, because a spot near US 287 can have different access and crossing needs from one beside Spring Creek. Tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, the pits and the lines that may need to be crossed.
Mobilization starts with the 361 road miles from Yukon, then the route and ground shape the work. Kirvin soil’s clay at about 40 inches can affect reaming and fluid needs. A crossing at US 287 or the Union Pacific track adds planning, and Spring Creek may call for a creek crossing review. Pipe size, total length, marked utilities, pavement, pit work, excavator time, sand backfill and emergency timing also affect the job price.
Questions people ask about boring in Crockett
Does Trinity take directional boring jobs in Crockett and Houston County?
Yes. We take jobs in Crockett and Houston County, and our crews work with Trinity from the first call through the bore log, whichever crew is on site. Our main office is in Yukon, Oklahoma, and vetted partner drilling contractors operate satellite yards that support work in Texas.
Can groundwater or flooding affect a bore pit near Crockett’s Spring Creek?
It can affect pit planning. The USDA soil survey maps seasonal water tables within 60 inches across 49 percent of Crockett, while flood prone soils cover 5 percent. Near Spring Creek, we plan pit placement and depth for the route, and use small pits and pumping if water collects.
Does Crockett’s Kirvin soil pose a corrosion concern for steel pipe?
The mapped corrosion concern is high for uncoated steel: the USDA soil survey shows high steel corrosion risk across 93 percent of Crockett. HDPE does not have that steel concern. For steel casing or tracer wire near Kirvin soil, the line owner selects any needed coating.
What ground does a bore pass through in Crockett’s Kirvin soil areas?
The USDA soil survey maps Kirvin fine sandy loam across 17 percent of Crockett. At about 40 inches, clay is mapped across 91 percent of the city, and the average clay content is 45 percent. Those are mapped soil patterns, not test borings, so the exact route still needs planning for changing ground.
How much rock is mapped within five feet of a Crockett bore?
Weathered bedrock is mapped within 60 inches across 44 percent of Crockett, and typical bedrock depth is 47 inches. Hard bedrock is not mapped within 60 inches. A route near the Cook Mountain Formation may still encounter changing claystone, sandstone or siltstone material.
Who approves a Crockett bore under US 287, and which TxDOT office reviews it?
The utility line owner submits the right of way application through TxDOT’s RULIS system, and the TxDOT Lufkin District reviews it. We prepare the bore plan and profile for the owner’s filing. For an electric or communication line crossing US 287, the standard cover is 60 inches below the lowest point of the crossed grade, subject to permit conditions.
What bore sizes and lengths can Trinity handle near Crockett’s Goliad Avenue?
We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Goliad Avenue depends on the route, utility crossings, ground and access, so we use the site details to determine a suitable approach.
How early should I call Texas811 for a Crockett bore along 4th Street?
The line owner or excavator needs to request a locate through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a 4th Street start moves more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Crockett near US 287?
The job route and scope determine the price. Factors include bore length and pipe size, Crockett’s clay and any weathered rock, crossings of US 287 or Union Pacific track, and pavement or creek work near Spring Creek. Pit work, excavator time, backfill, emergency timing and mobilization from Yukon also affect the plan.
Where the Crockett facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Crockett
- U.S. Census Bureau, TIGER/Line 2024: Crockett boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Crockett
- U.S. Census Bureau, American Community Survey 2019 to 2023: Crockett housing units and year built
- Macrostrat geologic map compilation: map units under Crockett
- U.S. EPA Safe Drinking Water Information System: public water systems serving Crockett
- U.S. Department of Transportation, North American Rail Network: track owners in Houston County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Houston County
- U.S. Geological Survey, Elevation Point Query Service: Crockett elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Crockett
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Crockett
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Crockett, Texas
Type the address of your job in Crockett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Crockett
All counties: Texas county list.
