trinityboringsolutions.com

Ames Texas Directional Boring: Texla Soil, US 90 and Union Pacific

Quick Answer: Can you get a line beneath US 90 or the Union Pacific track without cutting the surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Ames, Texas. From our Yukon, Oklahoma main office, the 478 road miles to Ames matter alongside the Union Pacific crossing when we plan mobilization. Texla soil covers 55 percent of the mapped area, and its sticky clay at depth can grip pipe, so we manage fluid and ream in stages. Near Abbott Creek, wet ground and drainage also shape the bore path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ames bores at a glance

  • Incorporated city in Liberty County, Texas. Population 1,210 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 478 miles, about 9.4 hours of driving.
  • Ground: Texla soil is mapped on 55 percent of the area, with silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 90, FM 160 and FM 1909. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring under US 90 in Ames?

Can a line pass beneath US 90 or Union Pacific track without opening the surface? Yes. We take directional boring work in Ames, an incorporated city in Liberty County, where the Census Bureau Vintage 2024 estimate is 1,210 residents. Water, sewer, gas, electric conduit and fiber can be routed beneath Main Street or FM 160 when the alignment and clearances suit the job.

Our main office is in Yukon, Oklahoma, and Ames work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short 3/4 inch service near Bakers Circle and a larger bore using 48 inch casing show the range we handle, from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, including work suited to Ames streets.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Texla soil like to bore in Ames?

The USDA soil survey maps Texla across 55 percent of Ames, with Texla silt loam covering 40 percent of the mapped area. Surface texture is mostly silt loam, while about 40 inches down, 55 percent is mapped as silty clay loam and 22 percent as clay. Average clay content at that depth is 33 percent, and heavy clay is mapped across 42 percent of the area. These are mapped soil patterns, not test borings. Sticky clay can ball on a reamer or grip a pulled pipe, so a route near Main Street needs a plan for fluid and staged reaming.

USDA soil survey, inside the Ames city limitsWhat is mapped
Soil series mappedTexla 55 percent, Aris 20 percent, Orcadia 9 percent, Anahuac 8 percent and Camptown 3 percent
Texture at the surfacesilt loam 68 percent, loam 21 percent and very fine sandy loam 8 percent
Texture about 40 inches downsilty clay loam 55 percent, clay 22 percent and clay loam 21 percent
Engineering class about 40 inches downlean clay (CL) 60 percent and fat clay (CH) 40 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches100 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA map shows no bedrock in the top five feet of Ames, though deeper material could still affect a bore. A seasonal water table is mapped within 60 inches across the city and within 40 inches across 92 percent, so pits near US 90 may need pumping. Flood prone soils cover 1 percent of the area. High steel corrosion risk is mapped throughout, which matters when selecting casing or tracer wire. The mapped Delta silt and clay unit is Pleistocene age; its clay and silt can make wet ground soft and sticky.

How do crews bore Ames silty clay loam?

Ames soil maps point to silty clay loam, clay and a shallow seasonal water table. We set the bore plan around those conditions, then track the drill head and adjust the fluid and reaming as the ground responds.

  1. For Texla’s silty clay loam, we use a thinner fluid mix with polymer and ream in stages to limit sticky clay buildup on the reamer.
  2. Because wet clay can swell around pipe near Main Street, we plan to pull the product pipe the same day the bore is opened.
  3. With seasonal water mapped close to the surface across Ames, we keep pits small and pump water out as needed.
  4. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth, including on routes toward US 90.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Ames near Union Pacific?

US 90 and FM 160 run through Ames, with FM 1909 also inside the limits; Texas State Highway 146 is 1.1 miles outside them. A line crossing those roads needs a route and depth plan suited to the specific right of way. Main Street runs 1.3 miles in the city, while Martin L King Street runs 3.84 miles and Martin Luther King Drive runs 1.61 miles. A bore can keep pavement and driveways uncut, with entry and exit pits placed off the crossing.

CrossingTypeMapped extentWho has a say
US 90US highway2.1 roadway miles insideState highway office
FM 160State highway4.2 roadway miles insideState highway office
FM 1909State highway0.2 roadway miles insideState highway office
Texas State Highway 146Highway nearby1.1 miles outsideState highway office
Union PacificRailroad2.3 track miles insideThe railroad
Abbott CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Turtle BayouStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.3 track miles in Ames, and public mapping shows 2 street and rail crossings. A track bore needs the railroad’s crossing agreement, which sets the casing, depth and flagging conditions. No named stream crosses are mapped inside the city, but Abbott Creek is 0.1 miles from the limits and Turtle Bayou is 0.4 miles away. Unnamed drainage runs for 1.24 miles in Ames, so a route near a drainage feature needs its own crossing review.

Do I need a permit to bore under roads in Liberty County in Ames?

US 90, FM 160 and FM 1909 are TxDOT routes in Ames, and TxDOT’s Beaumont District reviews utility work in Liberty County. Work in their right of way needs a TxDOT utility permit. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. Union Pacific also sets crossing conditions for its Ames track. For a bore near Abbott Creek or Turtle Bayou, planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Liberty County near Ames?

EPA drinking water records do not tie a water provider to Ames by town name. Before planning a bore along Main Street or FM 160, confirm the provider for that address with the city, county or local water district. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County, but that does not identify the line serving each Ames address. We confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
CenterPoint Energy, Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Liberty CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ames housing’s median year built at 1999; 6 percent was built before 1960, 47 percent from 1960 to 1999 and 47 percent in 2000 or later. Housing age does not establish the age or location of buried pipe. A replacement bore near Martin Luther King Drive still needs marked utilities exposed by hydrovac before the drill approaches them.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Ames from Hardin and the Yukon yard?

Ames is in Liberty County, covers 3.3 square miles and sits at an elevation of 69 feet. Its ZIP code is 77575. Liberty, the county seat and nearest larger city, is 3.1 miles west; Hardin is 7.2 miles north, Kenefick is 7.4 miles northwest, and Daisetta is 7.5 miles northeast. Ames is 478 road miles and a 9.4 hour drive from our Yukon, Oklahoma yard, a distance that is part of planning a mobilization for work near US 90.

Places near Ames

What boring work comes up near Martin Luther King Street in Ames?

  • Highway crossing: A route beneath US 90 needs a bore plan for TxDOT right of way and pavement, with the crossing kept below the travel lanes.
  • Street service: A water or sewer line beneath Main Street can pass under the pavement without opening a trench across the road.
  • Fiber route: Conduit along Martin Luther King Street needs marked utilities exposed before the drill approaches the planned path.
  • Rail crossing: A bore under Union Pacific track follows the railroad’s crossing agreement for casing, depth and flagging.
  • Drainage crossing: A route near Abbott Creek needs channel depth considered and jurisdiction checked during planning.
  • Electric conduit: Before a conduit bore near FM 160, the line owner for that Ames address needs confirmation.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Main Street in Ames?

For a route under Main Street, start with the address or map pin, then tell us what will go in the ground. We need the pipe or conduit size and the footage. A sketch or plans can show whether the route crosses a driveway, US 90 or Union Pacific track and help us shape the bore plan.

Price follows the Ames job details, not a single measurement. Texla clay affects drilling and reaming; crossing Union Pacific track or a TxDOT road adds coordination and crossing requirements. Length, pipe size, utilities to expose, pavement, drainage, pit work and excavator time all affect the scope. The 478 road miles from Yukon also matter for mobilization. High profile or emergency work can require a different plan.

Questions people ask about boring in Ames

Does Trinity Boring Solutions take directional boring jobs in Ames, Liberty County?

Yes. We take directional boring jobs in Ames and serve Texas from our Yukon, Oklahoma main office. Our own crews and vetted partner contractor crews can handle the work, while you stay with Trinity from the first call through the bore log. A route under US 90 or Main Street can be reviewed for the ground and crossings involved.

Which railroad owns the Ames track, and what does a Union Pacific bore need?

Union Pacific owns the 2.3 track miles mapped in Ames. A bore beneath that track needs the railroad’s crossing agreement, which sets conditions for casing, depth and flagging. The mapped 2 street and rail crossings make the exact route important; we plan the bore around the track and its crossing requirements.

Can a line be bored under Abbott Creek near Ames?

A bore under Abbott Creek can be considered, but the route and channel conditions need review first. The creek is 0.1 miles from Ames city limits, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Drainage and seasonal wet ground around Ames can also affect pit placement and bore depth.

Who owns electric lines in Liberty County near Ames, and who confirms conduit specs?

CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County, but those records do not establish the provider at every Ames address. The line owner needs to be confirmed for the specific route before conduit specifications are set. That check matters for a bore near FM 160 or another local road.

Does the city or county control Martin Luther King Street in Ames, and must it be cut?

Ames is incorporated, so Martin Luther King Street is a city street. A directional bore can pass beneath it without cutting the paved surface; pits sit on each side of the route. The exact alignment and any existing utilities still need checking before work is planned.

Do homes on Martin Luther King Drive show how old buried lines are in Ames?

No. The American Community Survey 2019 to 2023 estimates give Ames a median housing year of 1999, but home age does not show when a buried line was installed. For a replacement bore near Martin Luther King Drive, we expose marked utilities before drilling close to them.

Can I reach Trinity after hours about an urgent bore near Martin Luther King Street in Ames?

Yes. For an urgent bore near Martin Luther King Street, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. We also provide 24 hour emergency response, so you can discuss the route and what is in the ground even after regular business hours.

How much notice does Texas811 need for a bore near Martin L King Street in Ames?

For a bore near Martin L King Street, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. File no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 90 in Ames?

The Ames scope sets the price: length, pipe or conduit size, Texla soil, utilities to expose, pavement, pits and crossing conditions all matter. A US 90 bore also involves TxDOT right of way planning, while a Union Pacific route has railroad requirements. Mobilization from the Yukon yard is another part of the job.

Where the Ames facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ames

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ames, Texas

Type the address of your job in Ames. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ames

Same county: Dayton · Cleveland · Plum Grove · Big Thicket Lake Estates · Hull · Devers · North Cleveland · Old River-Winfree. All counties: Texas county list.