trinityboringsolutions.com

Cleveland Texas Directional Boring: Westcott Soil, US 59, Tarkington Bayou

Quick Answer: Westcott soil marks Cleveland ground where wet conditions can affect bore pits. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings of US 59 and Tarkington Bayou in Cleveland, Texas. From our Yukon, Oklahoma main office, Cleveland is 440 road miles away, and Union Pacific track can shape a route. Seasonal water tables are mapped in 74 percent of Cleveland, so pit size and water management matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cleveland bores at a glance

  • Incorporated city in Liberty County and Montgomery County, Texas. Population 9,757 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 440 miles, about 8.5 hours of driving.
  • Ground: Westcott soil is mapped on 27 percent of the area, with loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 59, US 59 Business, Texas State Highway 105, Loop 573 and FM 787. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: Union Pacific and BNSF Railway, with 24 mapped street and rail crossings.
  • Named streams inside the boundary: Tarkington Bayou, East Fork San Jacinto River, Bee Branch and Whisky Branch.
  • Public water: City of Cleveland, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Cleveland boring near Tarkington Bayou?

Westcott soil and loam are part of Cleveland ground, where wet conditions can affect work near Tarkington Bayou. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath Cleveland streets or around creek crossings as the plans require. The Census Bureau Vintage 2024 estimate puts Cleveland’s population at 9,757, with most of the city in Liberty County.

Our main office is in Yukon, Oklahoma, and Cleveland work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Cleveland routes, our range runs from a 3/4 inch service line to 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982, experience we bring to Cleveland project planning. Those years of work guide the way we plan around US 59 and Tarkington Bayou.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cleveland’s Westcott soil like to bore?

Westcott is Cleveland’s most common mapped soil series at 27 percent, with Splendora at 25 percent and Sorter at 14 percent. The USDA soil survey maps very fine sandy loam across 42 percent of the surface and fine sandy loam across 32 percent. About 40 inches down, loam is mapped in 65 percent of the area. Average clay content at that depth is 18 percent, while sandy ground is mapped in 2 percent. For Cleveland planning, we treat mapped soil patterns as context, not test borings or confirmed subsurface conditions. Near Tarkington Bayou, actual conditions can vary along a bore path.

USDA soil survey, inside the Cleveland city limitsWhat is mapped
Soil series mappedWestcott 27 percent, Splendora 25 percent, Sorter 14 percent, Segno 7 percent and Hatliff 7 percent
Texture at the surfacevery fine sandy loam 42 percent, fine sandy loam 32 percent and loam 10 percent
Texture about 40 inches downloam 65 percent, very fine sandy loam 14 percent and fine sandy loam 7 percent
Engineering class about 40 inches downlean clay (CL) 66 percent, silt (ML) 15 percent and silty clayey sand (SC SM) 7 percent
Average clay content about 40 inches down18 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches74 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel75 percent of the area
Mapped as urban land (disturbed fill)7 percent of the area

Bedrock is not mapped in the top five feet of Cleveland, but that does not rule out rock deeper down. The geologic map shows Holocene Alluvial Gravelly Sand, which can include sand, clay, gravel and silt. Seasonal water tables are mapped within 60 inches across 74 percent of the city, so pits may need pumping and wet sand can move. Flood prone soils cover 7 percent, making channel depth a planning concern near Tarkington Bayou. High steel corrosion risk is mapped across 75 percent, so the line owner should consider steel casing and tracer wire materials; HDPE avoids the soil corrosion concern for uncoated steel.

How do we drill Cleveland’s loam and Westcott soil?

Cleveland’s mapped loam, clay and seasonal wet ground call for a plan that fits the route. Along US 59 or near Tarkington Bayou, we check the path, access and marked utilities before drilling.

  1. At Tarkington Bayou, we plan the bore to pass below the channel and check for Corps jurisdiction; seasonal wet ground can make creek bank access and pits harder.
  2. Where Cleveland’s Westcott soil holds the hole, clay can stick to the reamer; staged reaming and a prompt pipe pull help limit time the hole stays open.
  3. In wet areas near Bee Branch, we size pits with the mapped seasonal water table in mind and use a pump if water collects.
  4. Before drilling near Southline Street, we expose marked utilities along the path with hydrovac; a walkover locator tracks the head, and we log depth and pitch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a Cleveland line go under US 59?

US 59 has 11.0 mapped roadway miles in Cleveland, and US 59 Business has 7.4. Texas State Highway 105 adds 12.5 mapped roadway miles, while Loop 573 has 7.1. A route under one of these highways needs a bore plan that accounts for the pavement and right of way. Cleveland’s longer named streets include Southline Street at 5.25 miles, Houston Street at 3.41 miles and Washington Avenue at 2.71 miles. A bore route near these streets must be checked for the actual road and utility layout.

CrossingTypeMapped extentWho has a say
US 59US highway11 roadway miles insideState highway office
US 59 BusinessUS highway7.4 roadway miles insideState highway office
Texas State Highway 105State highway12.5 roadway miles insideState highway office
Loop 573State highway7.1 roadway miles insideState highway office
FM 787State highway7.7 roadway miles insideState highway office
Texas State Highway 321State highway3.2 roadway miles insideState highway office
FM 2025State highway1.7 roadway miles insideState highway office
FM 1010State highway1.4 roadway miles insideState highway office
FM 1725State highway0.1 roadway miles insideState highway office
Interstate 69Highway nearby1.4 miles outsideState highway office
Union PacificRailroad8.82 track miles insideThe railroad
BNSF RailwayRailroad6.09 track miles insideThe railroad
Tarkington BayouStream6.94 channel miles insideChecked for Corps of Engineers jurisdiction
East Fork San Jacinto RiverStream3.57 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific track runs 8.82 miles inside Cleveland, and BNSF Railway track runs 6.09 miles. Public mapping records 24 street and rail crossings in the city, so the route determines which railroad controls a particular crossing. Tarkington Bayou runs 6.94 channel miles inside Cleveland; East Fork San Jacinto River runs 3.57 and Bee Branch runs 2.54. Mapping also shows 11 street crossings of named streams. Creek banks and channels affect bore depth and access, and none of the lakes and ponds are mapped within one mile.

Who approves a Cleveland bore in Liberty County?

For a bore under US 59, the utility owner applies for the TxDOT utility permit through the online RULIS system. The TxDOT Beaumont District reviews the application, and we provide the bore plan and profile for the owner to submit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit sets the required depth, and lines crossing a highway generally need at least 60 inches of cover below the lowest crossed grade. Because Cleveland is incorporated, we plan city street crossings with the city as the street owner. A crossing of Union Pacific or BNSF Railway track needs an agreement from the railroad that owns it. A Tarkington Bayou crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are near the City of Cleveland water system?

The City of Cleveland public water system uses groundwater wells and reports 4,053 service connections serving 12,438 people. That network is a reason to confirm water line locations before planning a bore near city streets. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County. Those reports do not identify the provider at every Cleveland address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of ClevelandPublic water systemGroundwater wells4,053 connections, 12,438 people served
CenterPoint Energy, Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Liberty County and Montgomery CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Cleveland’s American Community Survey 2019 to 2023 five year estimates put the median housing year at 1983; we do not treat housing age as a substitute for locating underground utilities. The same survey estimates that 13 percent of housing was built before 1960, 69 percent from 1960 to 1999 and 18 percent in 2000 or later. Along Houston Street, those different building eras can mean a mix of older lines and newer service connections. We use hydrovac potholing to expose each marked utility on the planned path before drilling near it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where do we work around Cleveland and Splendora soil?

Cleveland covers 18.8 square miles in Liberty County and Montgomery County, with 88 percent of the city in Liberty County. The city sits at an elevation of 152 feet and uses ZIP codes 77327 and 77328. North Cleveland is 1.8 miles north; Splendora is 8.7 miles southwest, where Splendora soil is also mapped in Cleveland. Plum Grove is 9.5 miles south, and Shepherd is 11.3 miles northeast. Conroe, the nearest larger city, is 23.5 miles west; Liberty, the county seat, is 27.4 miles southeast. The drive from our Yukon yard is 440 road miles and 8.5 hours, which affects mobilization for Cleveland work.

Places near Cleveland

What boring work comes up near Cleveland’s Washington Avenue?

  • Highway crossing: A bore beneath US 59 needs a route and profile suited to the pavement and the TxDOT right of way.
  • Water service: A connection near the City of Cleveland system needs its route checked against groundwater lines and existing street utilities.
  • Fiber conduit: A route near Washington Avenue can place conduit without cutting the pavement, with marked lines exposed before drilling nearby.
  • Creek crossing: A bore beneath Tarkington Bayou needs a planned depth below the channel and a check for federal jurisdiction.
  • Rail crossing: A route under Union Pacific track requires an agreement with the railroad that owns the line.
  • Street replacement: A service route along Southline Street can use a bore to avoid open cuts through pavement and driveways.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Cleveland quote near Travis Avenue?

A map pin near Travis Avenue matters because the exact route can change how a bore approaches a road, utility or drainage crossing. For an incorporated Cleveland city street, send the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us see how the proposed route fits the street and nearby access in Cleveland.

Cleveland’s mapped loam, clay and seasonal water conditions can affect drilling and pit work, so ground is an early price factor. The number and depth of utilities to expose matter too. A route beneath US 59 or Union Pacific track adds crossing requirements and coordination. Pavement, creek crossings at Tarkington Bayou, pits, excavator time and sand backfill also affect the scope. The 440 road miles from Yukon can affect mobilization, as can emergency timing or a high profile job.

Questions people ask about boring in Cleveland

Does Trinity take directional boring work in Cleveland, Liberty County, and who staffs it?

Yes. We take directional boring work in Cleveland and serve the Liberty County area with our own crews and crews from partner drilling contractors we have vetted. You work with Trinity through planning and the bore log, whether the route is near US 59, a city street or Tarkington Bayou.

Does Cleveland’s Westcott soil create a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across 75 percent of Cleveland. That matters for uncoated steel casing and tracer wire, so the line owner chooses the appropriate material or coating. HDPE does not have the same soil corrosion issue. A route near Westcott soil still needs its materials matched to the job.

What ground does a Cleveland bore pass through near Westcott soil?

The USDA soil survey maps Westcott across 27 percent of Cleveland, with Splendora mapped across 25 percent. About 40 inches down, loam is mapped in 65 percent of the city, and average clay content at that depth is 18 percent. These are mapped patterns, not test borings, so a Tarkington Bayou route can differ on site.

Will a Cleveland directional bore hit rock?

Bedrock is not mapped in the top five feet of Cleveland, but deeper rock is not ruled out. The geologic map shows Holocene Alluvial Gravelly Sand, which can contain sand, gravel, clay and silt. Near East Fork San Jacinto River, we plan from the route conditions rather than treating the map as a site specific drilling log.

Who approves a Cleveland bore under US 59, and which state office reviews it?

The utility owner applies for the TxDOT utility permit in RULIS, and the TxDOT Beaumont District reviews it. For a bore under US 59, we prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT rules require boring or tunneling beneath existing highway pavement.

What does a Cleveland bore under Union Pacific track require from us before we plan the crossing?

A bore beneath Union Pacific track needs an agreement from Union Pacific, the railroad that owns the track in Cleveland. The agreement sets crossing conditions such as casing, depth and flagging. If the line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

Can I reach Trinity after hours about an urgent bore near Cleveland’s Washington Avenue?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, and we offer 24 hour emergency response. If an urgent job is near Washington Avenue, have the address or map pin ready so we can understand the route and what needs to go underground.

How much notice does Texas811 need for a Cleveland bore near Southline Street?

For a bore near Southline Street, submit the Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays. That is at least two working days, and the request cannot be made earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring in Cleveland under US 59?

The route and scope set the price. Soil and water conditions near Cleveland, the size and length of the line, and utilities that must be exposed all matter. A US 59 crossing may add pavement and permit planning, while a Tarkington Bayou route can add creek work. Pit needs, concrete, excavator time and the 440 road miles from Yukon also affect mobilization.

Where the Cleveland facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cleveland

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cleveland, Texas

Type the address of your job in Cleveland. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cleveland

Same county: Dayton · Liberty · Ames · Daisetta · Hardin · Kenefick · Big Thicket Lake Estates · Hull · Devers · Old River-Winfree · Dayton Lakes. All counties: Texas county list.