trinityboringsolutions.com

Liberty Texas Directional Boring: Kaman Clay, Trinity River and Union Pacific

Quick Answer: Liberty maps Kaman clay near the surface and clay under 63 percent of mapped ground at about 40 inches; bedrock is not mapped in the top five feet. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work beneath US 90 and across the Trinity River in Liberty, Texas. Liberty is 475 road miles from our Yukon, Oklahoma main office, with Union Pacific tracks to plan around. Sticky clay can grip pipe, so staged reaming and a same day pull help.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Liberty bores at a glance

  • County seat of Liberty County, Texas. Population 8,974 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 475 miles, about 9.3 hours of driving.
  • Ground: Kaman soil is mapped on 37 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 90, Texas State Highway 146, FM 563, FM 2684 and FM 160. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: Union Pacific, with 17 mapped street and rail crossings.
  • Named streams inside the boundary: Trinity River, Abbott Creek, Big Bayou and Clayton Bayou.
  • Public water: City of Liberty, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near the Trinity River in Liberty?

We take Liberty bores through mapped Kaman clay, with bedrock not mapped in the top five feet. Liberty is the Liberty County seat, with a population of 8,974 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber for routes that may follow Main Street or need to pass beneath a local road or creek.

Our main office is in Yukon, Oklahoma, and Liberty work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. Compared with that reach, a Liberty service line or crossing near US 90 is a shorter, site specific job. Our family business started in 1965, and we have done directional boring since 1982 for work requiring careful Liberty ground planning.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Liberty Kaman soil like to bore?

The USDA soil survey maps Kaman as Liberty’s leading soil series, covering 37 percent of the city. Kaman clay map units account for 31 percent of the area as frequently flooded and 7 percent as occasionally flooded. At about 40 inches below the surface, clay is mapped under 63 percent of the area, while the mapped surface texture is clay across 44 percent. We use mapped soil patterns in Liberty for planning, not as a substitute for test borings. Clay can hold an open hole, but sticky cuttings may ball on the reamer and grip pipe.

USDA soil survey, inside the Liberty city limitsWhat is mapped
Soil series mappedKaman 37 percent, Belrose 8 percent, Cowmarsh 7 percent, Texla 6 percent and Spurger 5 percent
Texture at the surfaceclay 44 percent, very fine sandy loam 19 percent and silt loam 12 percent
Texture about 40 inches downclay 63 percent, very fine sandy loam 8 percent and silty clay loam 6 percent
Engineering class about 40 inches downfat clay (CH) 57 percent, lean clay (CL) 15 percent and silty clayey sand (SC SM) 12 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches75 percent of the area
Flood prone soils56 percent of the area
High corrosion risk for uncoated steel77 percent of the area

We do not see bedrock mapped in Liberty’s top five feet, but deeper rock remains possible. The USDA soil survey maps a seasonal water table within 60 inches across 75 percent of the area and flood prone soils across 56 percent, so pits near the Trinity River may need pumping and careful depth planning. In Liberty, high steel corrosion risk is mapped across 77 percent, informing casing material decisions. The geologic map describes Holocene Alluvial Gravelly Sand with sand, clay, gravel and silt, so ground can vary along a route.

How do we bore through Liberty clay?

Liberty’s Kaman clay can stay open but cling to the reamer. Along routes near the Trinity River, we match fluid and reaming steps to the ground and watch pressure around pavement.

  1. In Kaman clay, we use a thinner drilling fluid with polymer and open the hole in stages, since sticky cuttings can build on the reamer.
  2. With Liberty’s heavy clay areas, we watch fluid returns and keep pressure controlled near pavement so fluid does not lift the surface.
  3. Seasonal water tables mapped near the Trinity River can fill pits, so we plan compact pits and pumping where site conditions call for it.
  4. We track the drill head from the surface and record depth and pitch as it advances, a useful check where mapped alluvial sand and clay meet.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Which Liberty roads, tracks or creeks may a bore cross near US 90?

US 90 runs 9.4 mapped roadway miles inside Liberty, and Texas State Highway 146 runs 12.8 miles. FM 563, FM 2684, FM 160, FM 1011, FM 3361 and FM 2830 also pass through the city. A bore under an existing highway uses boring or tunneling rather than an open cut through pavement. Main Street is the longest named street at 4.46 miles, followed by Wallisville Road at 2.58 miles and Travis Street at 2.1 miles, giving local routes several possible street crossings.

CrossingTypeMapped extentWho has a say
US 90US highway9.4 roadway miles insideState highway office
Texas State Highway 146State highway12.8 roadway miles insideState highway office
FM 563State highway4.1 roadway miles insideState highway office
FM 2684State highway4 roadway miles insideState highway office
FM 160State highway1.2 roadway miles insideState highway office
FM 1011State highway1.1 roadway miles insideState highway office
FM 3361State highway0.9 roadway miles insideState highway office
FM 2830State highway0.7 roadway miles insideState highway office
Union PacificRailroad7.85 track miles insideThe railroad
Trinity RiverStream8.63 channel miles insideChecked for Corps of Engineers jurisdiction
Abbott CreekStream4.08 channel miles insideChecked for Corps of Engineers jurisdiction
Big BayouStream3.6 channel miles insideChecked for Corps of Engineers jurisdiction
Clayton BayouStream2.51 channel miles insideChecked for Corps of Engineers jurisdiction
Day Lake BayouStream1.93 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 7.85 track miles in Liberty, and public mapping shows 17 street and rail crossings inside the city. The Trinity River runs 8.63 channel miles here; Abbott Creek and Big Bayou add other water crossings, with 22 mapped street crossings of named streams in total. Lake Liberty is also inside city limits. A track or water crossing needs a separate route plan, and a water crossing is checked for federal jurisdiction during planning.

Who approves a Liberty County bore near roads or tracks?

For work in the right of way of US 90, Texas State Highway 146 or a farm to market road in Liberty County, the line owner files the utility permit with TxDOT through its online RULIS system. The TxDOT Beaumont District reviews it. We give the owner the bore plan and profile for that application and work under the permit issued to the owner. TxDOT cover requirements vary by line type, including 60 inches for electric and communication crossings and 60 inches for water crossings; the permit may set another depth. For Liberty city streets, we coordinate with the city because those streets belong to the city. A Union Pacific crossing requires an agreement with the railroad, and Trinity River crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground near the City of Liberty system?

The City of Liberty public water system uses groundwater wells and reports 3,182 service connections serving 8,170 people. For an electric conduit route in Liberty County, CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report service in the county. Those records do not identify the provider at each address, so we confirm the line owner before planning a conduit bore near the City of Liberty water lines.

Line ownerWhat it isSourceSize
City of LibertyPublic water systemGroundwater wells3,182 connections, 8,170 people served
CenterPoint Energy, Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Liberty CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Liberty’s median housing year at 1976; 24 percent of homes date before 1960, while 15 percent were built in 2000 or later. That mix can mean a replacement route near Wallisville Road differs from a new service. We expose each marked utility on the planned path before drilling near it, since locate marks show position but not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Liberty from Baytown and our Yukon office?

Liberty is in Liberty County, covers 44.52 square miles and sits 17 feet above sea level. We use Liberty ZIP codes 77575 and 77535 when checking project details before planning a bore. Ames is 3.1 miles east, Kenefick is 5.4 miles northwest, and Dayton is 9.0 miles west. Liberty is the county seat; Baytown, the nearest larger city, is 21.7 miles southwest. Our Yukon yard is 475 road miles away, a 9.3 hour drive, so that distance is part of planning equipment and crew mobilization for a Liberty job.

Places near Liberty

What would we bore near Travis Street in Liberty?

  • Highway crossing: A bore beneath US 90 keeps the existing pavement uncut and follows the cover and casing conditions in the TxDOT permit.
  • Water service: A new connection near the City of Liberty system needs a route checked against existing groundwater lines before drilling.
  • Fiber conduit: A run along Travis Street can pass beneath pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A route beneath Abbott Creek or the Trinity River needs depth planning and a jurisdiction check during design.
  • Rail crossing: A bore beneath Union Pacific track requires the railroad’s crossing agreement and coordination of its conditions.
  • Street replacement: A sewer or water replacement near Main Street can be bored beneath pavement rather than opened across the street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Liberty quote near Union Pacific?

For a route near Union Pacific tracks or Travis Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the path reaches US 90, a creek or an existing utility. Those details let us shape a quote around the actual Liberty route.

The job scope sets the price: length, pipe size, soil, crossings, pavement, pits, equipment time and mobilization all matter. Kaman clay can affect fluid and reaming needs, while a route under US 90 or across Union Pacific track adds crossing coordination. A Trinity River crossing can change depth planning, and the 475 road miles from Yukon affect mobilization. High profile or emergency work can also change the job plan.

Questions people ask about boring in Liberty

Does Trinity Boring Solutions take jobs in Liberty County, and how is the work staffed?

Yes, we take directional boring work in Liberty County, with our own crews and partner contractor crews working from vetted satellite yards. Our Yukon main office remains the point of contact from the first call through the bore log. A route near US 90 is planned for its specific access and crossings.

Who owns electric lines in Liberty County, and who confirms conduit specifications?

The electric line owner depends on the Liberty County address. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report service in the county, but those records do not assign a provider to every location. We confirm the owner and conduit specifications for the particular route, such as a planned run near Main Street.

Who controls Travis Street in Liberty, and can a bore avoid cutting it?

Travis Street is a city street in incorporated Liberty, so it belongs to the city. Directional boring can pass beneath the street without cutting its pavement; we plan the bore path and expose marked utilities before drilling near them. Access and the line route determine where pits can sit.

Do older buried lines near Wallisville Road in Liberty affect replacement bores?

They can affect planning, since Liberty’s median housing year is 1976 and 24 percent of homes were built before 1960, according to the American Community Survey 2019 to 2023 estimates. A replacement route near Wallisville Road needs existing utilities located and exposed before the drill approaches them.

Can groundwater or flood prone soil complicate bore pits near the Trinity River in Liberty?

Yes, it can. The USDA soil survey maps a seasonal water table within 60 inches across 75 percent of Liberty and flood prone soils across 56 percent. Near the Trinity River, we account for water in pits and plan the crossing depth around the channel.

Does Kaman soil in Liberty pose a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 77 percent of Liberty, including areas with Kaman soil. For Liberty crossings, we leave coating choices for steel casing or tracer wire to the line owner. HDPE does not share that steel corrosion concern, and the material choice depends on the line design.

What bore sizes and lengths can Trinity handle for a job near Commerce Street in Liberty?

For a route near Commerce Street, we handle 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The needed size and length depend on what the line serves and what the route crosses.

How much notice does Texas811 need for a Liberty bore near Main Street, and what if marks change?

For a bore near Main Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Liberty start, if work slips more than 14 days past the original notice, we make a new request. On Liberty city streets, we have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near US 90 in Liberty?

The route and scope determine the price, not one item alone. Length, pipe size, Kaman clay, pavement, utility crossings, pits and excavator time can all matter. A US 90 crossing adds permit and installation planning, while Union Pacific track or Trinity River crossings add their own coordination. Mobilization from Yukon is also part of the job.

Where the Liberty facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Liberty

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Liberty, Texas

Type the address of your job in Liberty. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Liberty

Same county: Cleveland · Plum Grove · Daisetta · Big Thicket Lake Estates · Hull · Devers · North Cleveland · Old River-Winfree. All counties: Texas county list.