Dayton Lakes Texas Directional Boring: Sourlake Loam, Lake Bayou and Lavaca Lane
Quick Answer: Lake Bayou sits just outside Dayton Lakes, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes near it. Lavaca Lane is one of the city’s longest streets, so we plan the bore path around its existing utilities. Dayton Lakes is 469 road miles from our Yukon, Oklahoma main office, a distance that affects mobilization for work near Kenefick. Sourlake soil is frequently flooded, so wet ground and water control matter during drilling.
Dayton Lakes bores at a glance
- Incorporated city in Liberty County, Texas. Population 57 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 469 miles, about 9.3 hours of driving.
- Ground: Sourlake soil is mapped on 49 percent of the area, with loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary or within a mile and a half of it.
- Railroad track inside the boundary: none mapped.
- Public water: City of Dayton Lakes, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring in Dayton Lakes, Liberty County?
We take directional boring work in Dayton Lakes, Liberty County, where the Census Bureau Vintage 2024 estimate puts the population at 57. The main challenge is the mapped wet ground around streets such as Lavaca Lane. We install water, sewer, gas, electric conduit and fiber, routing each line along a planned path that avoids marked utilities and fits the site.
Our main office is in Yukon, Oklahoma, and Dayton Lakes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For routes near Lewis Lake or Lavaca Lane, we handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. We are a family business that started in 1965 and has done directional boring since 1982.

How does Sourlake soil affect drilling in Dayton Lakes?
The USDA soil survey maps Sourlake soil across 49 percent of Dayton Lakes, with Kaman clay mapped across another 25 percent. At about 40 inches below the surface, the survey maps loam across 49 percent, clay across 30 percent and fine sandy loam across 13 percent. These are mapped soil patterns, not test borings. The clay can cling to a reamer and grip pipe, while the loam and clay mix calls for steady fluid control and staged reaming along streets such as Trinity Road.
| USDA soil survey, inside the Dayton Lakes city limits | What is mapped |
|---|---|
| Soil series mapped | Sourlake 49 percent, Kaman 25 percent, Hatliff 13 percent and Cowmarsh 4 percent |
| Texture at the surface | loam 62 percent, clay 25 percent and mucky silty clay 4 percent |
| Texture about 40 inches down | loam 49 percent, clay 30 percent and fine sandy loam 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 49 percent, fat clay (CH) 25 percent and silty clayey sand (SC SM) 13 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 78 percent of the area |
| Flood prone soils | 91 percent of the area |
| High corrosion risk for uncoated steel | 78 percent of the area |
Bedrock is not mapped in the top five feet of Dayton Lakes, though that does not rule out rock at greater depth. The USDA survey maps a seasonal water table within 60 inches across 78 percent of the area and flood prone soils across 91 percent, so pits may need pumping and a route near Lewis Lake needs wet ground planning. High steel corrosion risk covers 78 percent. The geologic map shows Alluvium of Holocene age, including sand, silt, clay and gravel; conditions can vary along a bore.
What does it take to bore through loam in Dayton Lakes?
In Dayton Lakes, we match the drilling fluid and reaming pace to the mapped loam and clay, then track the bore around streets such as Lavaca Lane and nearby Lewis Lake.
- Sourlake soil is frequently flooded, so we keep entry and exit pits manageable and pump water when needed near Lewis Lake or Pecan Lake.
- Clay can stick to the reamer around Trinity Road, so we use a thinner fluid mix, ream in stages and pull the pipe after opening the hole.
- We hydrovac pothole every marked utility on the Dayton Lakes bore path before the drill approaches it; locate paint shows position, not depth.
- We track the drill head from the surface and record depth and pitch as it advances, especially where the alluvial ground near Lake Bayou may vary.

What is in the way of a new line in Dayton Lakes near Lavaca Lane?
Dayton Lakes has no highways within its limits or within 1.5 miles outside them, so the street route is the main mapped corridor to plan around. Lavaca Lane runs 1.3 miles inside the city, Trinity Road runs 1.0 mile, and River Road runs 0.96 miles. The public road centerlines total 11.85 miles across 29 named streets. We can plan a bore below pavement and driveways, with pits placed in dirt rather than cutting across the street surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Lake Bayou | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Hardin Lake | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Gillen Bayou | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Long John Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Rosewood Lake | Lake or pond | 53 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Lewis Lake | Lake or pond | 38 acres, inside | Checked for Corps of Engineers jurisdiction |
| Pecan Lake | Lake or pond | 23 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Dayton Lakes or within 1 mile outside the city, and no street and rail crossing is mapped inside the limits. No named stream runs inside the city, and none of the mapped streets crosses a named stream there. Lake Bayou is 0.1 miles from the city limits, while Hardin Lake is 0.5 miles away. A proposed bore near either water feature needs a route review, and a water crossing is checked for federal jurisdiction during planning.
Whose permission does a Dayton Lakes bore in Liberty County need?
For a bore along Lavaca Lane or Trinity Road, Dayton Lakes is an incorporated city, so its city streets belong to the city itself. No state highway is mapped in or within 1.5 miles of the limits, so the TxDOT Beaumont District highway utility permit process applies only if a project reaches state highway right of way. For such work, the utility owner files through TxDOT’s online RULIS system, using our bore plan and profile. Lake Bayou is outside the city; a proposed creek or lake crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Texas811 requires notice at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the City of Dayton Lakes water lines and other utilities?
The City of Dayton Lakes public water system uses groundwater wells and reports 28 service connections serving 36 people. For an electric conduit bore near Lewis Lake or Lavaca Lane, the county records list CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative as reporting service in Liberty County. The specific electric line owner must be confirmed before conduit specifications are set, since those providers are not identified for every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Dayton Lakes | Public water system | Groundwater wells | 28 connections, 36 people served |
| CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in Liberty County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median Dayton Lakes housing year at 1980; 17 percent of homes were built before 1960, 71 percent from 1960 to 1999, and 12 percent in 2000 or later. Work near Trinity Road may involve replacement lines for older properties or new service connections. Before drilling near a marked utility, we expose it to confirm its position and depth.

Where is Dayton Lakes in relation to Kenefick?
Dayton Lakes is in Liberty County, 7.4 miles north of Liberty, the county seat and nearest larger city. Kenefick is 3.2 miles southwest, and Hardin is 4.7 miles east. The city covers 0.86 square miles at an elevation of 32 feet, and its ZIP code is 77535. From our Yukon, Oklahoma main office, the road trip is 469 miles and 9.3 hours. That distance matters when we schedule equipment and crews for a bore near Lavaca Lane or Lewis Lake.
Places near Dayton Lakes
- Directional boring in Kenefick: 3.2 miles southwest
- Directional boring in Hardin: 4.7 miles east
- Directional boring in Liberty: 7.4 miles south
- Directional boring in Ames: 8.3 miles southeast
- Directional boring in Hull: 10.4 miles east
What would we bore near Trinity Road in Dayton Lakes?
- Water service: A service near the City of Dayton Lakes well system can follow a route beside Lavaca Lane, with marked lines exposed before drilling nearby.
- Fiber conduit: A route along Trinity Road can carry fiber beneath pavement, with the bore path set around existing service connections.
- Creek crossing: A proposed route toward Lake Bayou needs a planned channel crossing and a check for federal jurisdiction during planning.
- Street crossing: A line beneath River Road can leave the road surface uncut, with entry and exit pits set in dirt beside the pavement.
- Electric conduit: Near Lewis Lake, we confirm the line owner and conduit requirements before setting a bore route through the mapped wet soils.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Dayton Lakes bore near Lake Bayou?
For a Dayton Lakes quote, start with the address or map pin near Lavaca Lane, Trinity Road or Lake Bayou. Tell us what goes underground, such as water service or fiber, then give the pipe or conduit size and expected footage. A sketch or plans help us set the route and identify any creek, street or utility crossings before we scope the work.
The route and ground conditions around Dayton Lakes drive the scope. Sourlake soil and frequently flooded ground come first because they affect drilling fluid, reaming and pit work. Next, the number of utilities to expose and any pavement or concrete along Lavaca Lane affect the setup. A Lake Bayou crossing adds water crossing review, while distance from Yukon affects mobilization. Pipe size, footage, excavator time, sand backfill and emergency timing also shape the work.
Questions people ask about boring in Dayton Lakes
Does Trinity Boring Solutions take directional boring jobs in Dayton Lakes, Liberty County?
Yes. We take work in Dayton Lakes, Liberty County, and staff it with our own crews or crews from vetted partner drilling contractors at satellite yards. You deal with Trinity from the first call through the bore log, including work near Lavaca Lane. The route and crew plan depend on the line and site access.
What ground should I expect for a Dayton Lakes bore through Sourlake soil?
The USDA soil survey maps Sourlake soil across 49 percent of Dayton Lakes, and loam covers 49 percent of the mapped area at about 40 inches down. Clay accounts for 30 percent at that depth. These mapped patterns are not test borings; the sticky clay and frequently flooded soil call for staged reaming and attention to water near Lewis Lake.
Will a Dayton Lakes bore hit rock near Trinity Road?
The geologic map does not map bedrock in the top five feet of Dayton Lakes, but that does not rule out deeper rock. The mapped unit is Alluvium of Holocene age, with sand, silt, clay and gravel. Conditions can change along Trinity Road, so the bore plan still needs to allow for variable ground.
Can a line be bored under Lake Bayou near Dayton Lakes?
A bore under Lake Bayou can be considered if the route and ground conditions support it. The stream is 0.1 miles from Dayton Lakes city limits, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. We would need the crossing location and line details to assess the route.
Who runs the Dayton Lakes public water system, and where does its water come from?
The City of Dayton Lakes runs the public water system, which draws from groundwater wells. Public records report 28 service connections serving 36 people. If a proposed water line near Lavaca Lane connects to that system, the specific route and existing utilities still need to be confirmed before drilling.
Who owns electric lines in Dayton Lakes, Liberty County, for a conduit bore?
CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County. That does not identify the owner at every Dayton Lakes address. Before a conduit bore near Trinity Road or Lewis Lake, we confirm the line owner and get the conduit specifications from that owner.
How much Texas811 notice does a Dayton Lakes bore along Lavaca Lane need?
Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Marks show where a line is, not its depth. If marks move or wear off along Lavaca Lane, they must be refreshed through Texas811 before work continues.
How far is Dayton Lakes from Liberty and Trinity’s Yukon, Oklahoma main office?
Dayton Lakes is 7.4 miles north of Liberty, while our Yukon, Oklahoma main office is 469 road miles away, a 9.3 hour drive. That distance affects mobilization for work near Trinity Road. We plan equipment and crew travel around the job scope rather than treating the trip as a local dispatch.
What affects the cost of a Dayton Lakes bore near Lake Bayou?
The price depends on the specific route and scope, not one standard measure. Sourlake soil and flooded ground can affect reaming and pit work; a Lake Bayou crossing adds planning. Line size and footage, utilities to expose, pavement, excavator time, backfill, emergency timing and mobilization from Yukon also affect the job.
Where the Dayton Lakes facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Dayton Lakes
- U.S. Census Bureau, TIGER/Line 2024: Dayton Lakes boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Dayton Lakes
- U.S. Census Bureau, American Community Survey 2019 to 2023: Dayton Lakes housing units and year built
- Macrostrat geologic map compilation: map units under Dayton Lakes
- U.S. EPA Safe Drinking Water Information System: public water systems serving Dayton Lakes
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Liberty County
- U.S. Geological Survey, Elevation Point Query Service: Dayton Lakes elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Dayton Lakes
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Dayton Lakes
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Dayton Lakes, Texas
Type the address of your job in Dayton Lakes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Dayton Lakes
Same county: Dayton · Cleveland · Plum Grove · Daisetta · Big Thicket Lake Estates · Devers · North Cleveland · Old River-Winfree. All counties: Texas county list.
