trinityboringsolutions.com

Sudan Texas Directional Boring: Amarillo Soil, US 84 and BNSF Railway

Quick Answer: Can you get a line under US 84 or BNSF Railway without cutting it? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Sudan, Texas, for crossings like these. From our Yukon, Oklahoma main office, Sudan is 369 road miles away, and US 84 is one route a bore may need to pass beneath. Amarillo soil includes sandy clay loam about 40 inches down, so we plan for ground that can hold and grip the bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sudan bores at a glance

  • Incorporated city in Lamb County, Texas. Population 937 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 369 miles, about 7 hours of driving.
  • Ground: Amarillo soil is mapped on 100 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 84 and FM 303. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: City of Sudan, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Sudan and Lamb County?

Can you get a line under US 84 or a BNSF Railway track without cutting the surface? We take directional boring work in Sudan, an incorporated city in Lamb County with a population of 937, according to the Census Bureau Vintage 2024 estimate. Along Barron Street or another route, we install water, sewer, gas, electric conduit and fiber, with the bore path set for the line and crossing.

Our main office is in Yukon, Oklahoma, and Sudan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A proposed line along Barron Street is a different scale, but our family business has done directional boring since 1982 and started in 1965.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Amarillo soil like to bore in Sudan?

The USDA soil survey maps Amarillo soil across Sudan. At the surface, the mapped area is 62 percent fine sandy loam and 38 percent loamy fine sand. About 40 inches down, sandy clay loam is mapped throughout the area, with an average clay content of 24 percent. Those survey patterns are not test borings. The fine sandy loam and loamy fine sand can cut readily, while the deeper sandy clay loam can hold the hole and may cling to a reamer or pipe.

USDA soil survey, inside the Sudan city limitsWhat is mapped
Soil series mappedAmarillo 100 percent
Texture at the surfacefine sandy loam 62 percent and loamy fine sand 38 percent
Texture about 40 inches downsandy clay loam 100 percent
Engineering class about 40 inches downlean clay (CL) 62 percent and clayey sand (SC) 38 percent
Average clay content about 40 inches down24 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet, and that does not rule out rock at greater depth. The map shows the Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material, as well as Paleocene Cenozoic sedimentary rocks. Seasonal water table, flood prone soils and high steel corrosion risk are not mapped in Sudan. That gives no mapped shallow water or corrosion issue to plan around, but the deeper sandy clay loam still calls for controlled fluid and staged reaming.

How do we bore Sudan’s sandy clay loam?

Sudan’s mapped surface soils are fine sandy loam and loamy fine sand, with sandy clay loam below. We match the drilling fluid and reaming sequence to those changing layers and to the route beside streets such as Hay Street.

  1. In Sudan’s mapped fine sandy loam and loamy fine sand, we use drilling fluid to support the bore as the ground can loosen behind the cutting head.
  2. At about 40 inches, the USDA survey maps sandy clay loam, so we ream in stages and manage fluid to limit material buildup around the reamer.
  3. Before a bore near Hay Street, we hydrovac expose every marked utility on the path; surface paint shows location, not how deep a line sits.
  4. As the drill advances under a Sudan street, a walkover locator tracks the head from the surface while we log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads and tracks can a bore cross in Sudan, including BNSF Railway?

US 84 runs 3.2 mapped roadway miles inside Sudan, and FM 303 runs 1.3. A line beneath either highway needs a planned crossing rather than an open cut through existing pavement. The longer named streets include Barron Street, Hay Street and 1st Avenue, so a route may also need to pass below street pavement or driveways. The mapped road network totals 21.12 public road centerline miles, which gives the route and access plan a local scale.

CrossingTypeMapped extentWho has a say
US 84US highway3.2 roadway miles insideState highway office
FM 303State highway1.3 roadway miles insideState highway office
BNSF RailwayRailroad2.22 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 2.22 track miles inside Sudan, and public mapping shows 3 street and rail crossings. A bore beneath its track needs an agreement from the railroad that owns it, with crossing conditions set for that location. No streams, lakes or ponds are mapped in or within the stated surrounding area, and no street crossings of named streams are mapped. The BNSF track is the mapped major crossing feature to check alongside US 84.

Do I need a permit to bore under US 84 in Sudan?

For a line crossing US 84 in Sudan, TxDOT’s utility rules set the depth: electric and communication lines need at least 60 inches of cover below the lowest crossed grade, and water lines need the same minimum. Pressurized sewer crossings also need 60 inches. Along highway right of way, electric and communication lines need 48 inches of cover and water lines need 36 inches. TxDOT requires boring or tunneling below existing highway pavement, and rural highway crossings extend beneath all travel lanes. The TxDOT Lubbock District reviews the utility permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near City of Sudan lines?

The City of Sudan public water system uses groundwater wells and reports 465 service connections serving 940 people. That makes water lines a key locate item before a bore near Hay Street or another service route. Lamb County electric service is reported by Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore, since the county list does not identify the provider at each address.

Line ownerWhat it isSourceSize
City of SudanPublic water systemGroundwater wells465 connections, 940 people served
Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Lamb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sudan’s median housing year at 1965; 39 percent of housing was built before 1960, 46 percent from 1960 to 1999 and 15 percent in 2000 or later. Older homes can mean replacement work near Hay Street, but the housing data does not establish pipe age. We hydrovac expose marked utilities on the bore path before drilling near them, since locate marks show position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Sudan from Littlefield and our Yukon office?

Sudan is an incorporated city in Lamb County, at an elevation of 3,756 feet, with 1.02 square miles of land and ZIP code 79371. Amherst is 7.3 miles southeast, Earth is 13.3 miles northeast, and Littlefield is 14.9 miles southeast. Littlefield is also the county seat and nearest larger city. Muleshoe is 16.2 miles northwest, and Springlake is 16.9 miles northeast. From our Yukon, Oklahoma main office, Sudan is 369 road miles and a 7.0 hour drive, so mobilization is part of planning a job near US 84.

Places near Sudan

What boring work comes up near Barron Street in Sudan?

  • Highway crossing: A bore beneath US 84 is planned below the pavement and all travel lanes, with cover and the TxDOT permit addressed before work.
  • Rail crossing: A route beneath the BNSF Railway track needs an agreement with the track owner and a plan for its crossing conditions.
  • Water service: A connection near the City of Sudan system needs the existing groundwater line located before a new route is drilled.
  • Fiber route: A fiber conduit along 1st Avenue can pass below pavement, with marked lines exposed before the drill approaches them.
  • Replacement bore: Work near Hay Street may replace service to older housing, with potholing used to check the path against existing lines.
  • Street crossing: A bore beneath Barron Street can leave pavement uncut, with pits placed in dirt on each side of the crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Sudan bore near East Avenue?

A map pin matters near East Avenue because a small shift can change whether a route meets street pavement, a marked utility or the BNSF track. Send the job address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us set the route and identify the crossings to review.

For an East Avenue job, price depends on the mapped sandy clay loam, bore length and pipe or conduit size. We also look at how many utilities need exposing, pavement or concrete, pits, excavator time and sand backfill. A US 84 or BNSF Railway crossing adds route and approval details. Sudan is 369 road miles from Yukon, so mobilization matters too; emergency timing or a high profile crossing can add planning needs.

Questions people ask about boring in Sudan

Does Trinity take directional boring jobs in Sudan and Lamb County?

Yes. We take directional boring jobs in Sudan, Lamb County, using our own crews and partner contractor crews from satellite yards. Trinity vets those drilling partners, and you work with our team from the first call through the bore log. A route beneath US 84 or near BNSF Railway is planned around its specific crossing.

Who controls 1st Avenue in Sudan, and can a bore avoid cutting it?

Sudan is incorporated, so its city streets, including 1st Avenue, belong to the city itself. Directional boring can pass below pavement instead of opening a trench across the street. The entry and exit pits still need suitable locations, and marked utilities along the selected route must be exposed before drilling near them.

Could older buried lines near Hay Street in Sudan affect a replacement bore?

They could affect the route, but housing age does not confirm the age or location of buried pipe. The American Community Survey estimates Sudan’s median housing year at 1965, with 39 percent of housing built before 1960. Near Hay Street, we check records and expose marked lines before setting the bore path.

What ground does a bore cross in Sudan’s Amarillo soil?

The USDA soil survey maps Amarillo soil across Sudan, with fine sandy loam or loamy fine sand at the surface and sandy clay loam about 40 inches down. The surface material can cut easily, while deeper clay can hold the hole or stick to the reamer. These are mapped patterns, not jobsite soil tests.

Will a directional bore in Sudan hit rock?

The soil mapping does not show bedrock in the top five feet, but that cannot rule out deeper rock. The geologic map includes the Cenozoic Blackwater Draw Formation, described as sand, silt and locally clayey material, along with Paleocene Cenozoic sedimentary rocks. A site specific route still needs to account for what the drill encounters.

Who approves a bore under US 84 in Sudan?

TxDOT reviews the utility permit for a crossing of US 84 in Sudan through its Lubbock District. The utility owner, not the drilling contractor, submits the application in TxDOT’s online RULIS system. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner.

What bore sizes and lengths can you handle near East Avenue in Sudan?

For a proposed line near East Avenue, our equipment range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The usable size and length depend on the job route, material, ground and crossing constraints. We review those details before choosing a setup.

How much Texas811 notice is needed for a bore near Barron Street in Sudan?

For a bore near Barron Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. Texas811 describes the lead time as two working days. If work slips more than 14 days past the original notice, make a new request; worn or moved marks need refreshing before work continues.

What affects the cost of directional boring under US 84 in Sudan?

The job scope drives the price, with no single factor deciding it. For US 84, the crossing and pavement affect planning. Other factors include length, pipe or conduit size, Sudan’s sandy clay loam, utilities to expose, pits, excavator time, sand backfill and mobilization from Yukon. Emergency or high profile work can also change the required plan.

Where the Sudan facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sudan

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sudan, Texas

Type the address of your job in Sudan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sudan

Same county: Olton · Spade. All counties: Texas county list.