trinityboringsolutions.com

Daisetta Texas Directional Boring: Anahuac Soil, FM 770 and North Fork Long Island Bayou

Quick Answer: Need a line under FM 770 or North Fork Long Island Bayou without cutting the surface? We do directional boring, also called horizontal directional drilling (HDD), for Daisetta routes like those. From FM 834, our Yukon, Oklahoma main office is 480 road miles away, which is part of planning mobilization. The USDA soil survey maps Anahuac soil across 59 percent of Daisetta, and heavy clay can cling to a reamer and grip pipe. That calls for staged reaming and controlled fluid on a Main Street bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Daisetta bores at a glance

  • Incorporated city in Liberty County, Texas. Population 1,177 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 480 miles, about 9.5 hours of driving.
  • Ground: Anahuac soil is mapped on 59 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 770 and FM 834. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: North Fork Long Island Bayou and West End Slough.
  • Public water: City of Daisetta, groundwater bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Daisetta near North Fork Long Island Bayou?

Need a line beneath Main Street or FM 770 without cutting the surface? We take directional boring work in Daisetta, Liberty County, where the Census Bureau Vintage 2024 estimate puts the population at 1,177. Our crews install water and sewer lines along West Pine, plus gas, electric conduit and fiber routes near FM 834. The route and what is already buried help shape the bore plan.

Our main office is in Yukon, Oklahoma, and Daisetta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a West Pine service, our range starts with 3/4 inch lines and reaches 48 inch casing, with bores from 10 feet to 5,000 feet. The family business began in 1965, and we have done directional boring since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Anahuac soil survey show beneath Daisetta?

The USDA soil survey maps Anahuac soil across 59 percent of Daisetta, with Evadale mapped across 23 percent and Hatliff across 10 percent. These are mapped soil patterns, not test borings for a particular West Pine route. At about 40 inches below the surface, clay is mapped under 68 percent of the area, and average clay content at that depth is 35 percent. Heavy clay holds an open hole, but it can stick to the reamer and swell against pipe. Field conditions still need to be checked along the planned bore.

USDA soil survey, inside the Daisetta city limitsWhat is mapped
Soil series mappedAnahuac 59 percent, Evadale 23 percent, Hatliff 10 percent, Vamont 5 percent and Bevil 3 percent
Texture at the surfacevery fine sandy loam 59 percent, silt loam 23 percent and loam 10 percent
Texture about 40 inches downclay 68 percent, silt loam 23 percent and fine sandy loam 10 percent
Engineering class about 40 inches downfat clay (CH) 68 percent, lean clay (CL) 23 percent and silty clayey sand (SC SM) 10 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches90 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel90 percent of the area

For a route near FM 770, bedrock is not mapped in the top five feet, which does not rule out rock at greater depth. The USDA soil survey maps a seasonal water table within 60 inches across 90 percent of Daisetta, so pits may need pumping. Flood prone soils cover 10 percent of the mapped area. Across 90 percent of Daisetta, mapped high steel corrosion risk leads us to consider casing and tracer wire materials for boring near Main Street. The geologic map shows the Beaumont Formation, a Pleistocene unit described as predominantly clay.

How do we drill Daisetta clay without losing control?

Anahuac soil and clay mapped under much of Daisetta call for a bore plan that manages sticky cuttings and fluid pressure. We track the drill head from the surface and log depth and pitch as it advances.

  1. With clay mapped under 68 percent of Daisetta at about 40 inches, we use thinner drilling fluid and polymer, then open the hole in stages.
  2. Sticky cuttings from the Anahuac soil can collect on a reamer and grip the pipe, so we plan to pull the line the same day the hole is opened.
  3. Because a seasonal water table is mapped within 60 inches across 90 percent of Daisetta, we keep pits small and pump water when needed.
  4. Before drilling near a marked utility, we expose it by hydrovac. On a Main Street route, that means checking each marked line’s actual depth before the drill approaches.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a Daisetta line go under FM 770?

FM 770 and FM 834 are the state highways inside Daisetta. The mapped city road length includes 1.2 miles of FM 770 and 0.5 miles of FM 834, so a route in either right of way needs to be planned as a state highway crossing or installation. Main Street is the longest named street at 1.22 miles in the city. Bobcat Lane runs 0.85 miles and West Oak runs 0.71 miles. West Pine adds another 0.54 miles of possible city street frontage. A bore keeps pavement and driveways uncut.

CrossingTypeMapped extentWho has a say
FM 770State highway1.2 roadway miles insideState highway office
FM 834State highway0.5 roadway miles insideState highway office
North Fork Long Island BayouStream0.34 channel miles insideChecked for Corps of Engineers jurisdiction
West End SloughStream0.09 channel miles insideChecked for Corps of Engineers jurisdiction
SwampStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Long Island BayouStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Daisetta or within one mile of its limits, so the local crossing picture centers on roads and waterways. North Fork Long Island Bayou runs 0.34 channel miles inside the city, and West End Slough runs 0.09 miles. Mapped street crossings of named streams are absent. A crossing under North Fork Long Island Bayou still needs review for possible U.S. Army Corps of Engineers jurisdiction during planning.

Whose permission does a Daisetta bore in Liberty County need?

Main Street and West Pine are city streets because Daisetta is incorporated. FM 770 and FM 834 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Beaumont District. The utility owner, not our drilling crew, submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. For North Fork Long Island Bayou, we check for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped near Daisetta.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the City of Daisetta water lines and nearby utilities?

The City of Daisetta public water system serves 1,141 people through 406 service connections and uses purchased groundwater. That is useful context for a water service near West Pine, but the owner of the specific line still needs to be identified. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County. We confirm the line owner before planning an electric conduit bore near FM 770.

Line ownerWhat it isSourceSize
City of DaisettaPublic water systemGroundwater bought from another system406 connections, 1,141 people served
CenterPoint Energy, Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Liberty CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Daisetta’s median housing year at 1971, guiding how we plan underground work around the housing stock. The survey estimates 9 percent of housing was built before 1960, 66 percent from 1960 to 1999, and 25 percent in 2000 or later. That mix can mean work on an older service near Main Street as well as new connections. We expose each marked utility on a bore path before drilling near it, since surface marks show position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Daisetta, including Hull?

Daisetta is in Liberty County, at an elevation of 81 feet, and covers 1.48 square miles. ZIP code 77533 serves Daisetta in Liberty County, and we use it to identify the service area before planning underground work. Hull is 2.2 miles north, Hardin is 6.2 miles northwest, Devers is 6.8 miles southeast, and Ames is 7.5 miles southwest. Liberty, the county seat and nearest larger city, is 10.2 miles southwest. From our Yukon yard, Daisetta is 480 road miles and a 9.5 hour drive away, a factor in scheduling work along FM 770 and nearby rural routes.

Places near Daisetta

What would we bore near Main Street in Daisetta?

  • Highway crossing: A water line under FM 770 needs a planned bore beneath the highway pavement and all travel lanes.
  • Street service: A new water or sewer connection along Main Street can pass below pavement and driveways without an open cut.
  • Fiber conduit: A route near West Oak can carry conduit below the street surface, with marked utilities exposed along the bore path.
  • Creek crossing: A line beneath North Fork Long Island Bayou needs a planned depth below the channel and a jurisdiction check.
  • Water service: A connection near West Pine can be planned around the City of Daisetta public water system and existing lines.
  • Rural service: A line toward Hull can extend beyond Daisetta’s limits, with route length and access included in the bore plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Daisetta bore near West Pine?

For a West Pine quote, show us where the line starts and ends with an address or map pin. Tell us what goes underground, such as a water line near the City of Daisetta system, then give the pipe or conduit size and the footage. A sketch or plans help us see whether the route reaches Main Street, FM 770 or a drainage crossing.

Mobilization starts with the 480 road miles from Yukon, then the ground: Anahuac soil and heavy clay can change the reaming plan. Crossing FM 770 adds state right of way work, while a North Fork Long Island Bayou route needs water crossing review. We also consider line size and length, marked utilities to expose, pavement or concrete, entry and exit pits, excavator time, backfill, and whether the work is high profile or an emergency.

Questions people ask about boring in Daisetta

Does Trinity take directional boring jobs in Daisetta and Liberty County?

Yes. We take directional boring work in Daisetta and across Texas, coordinating FM 770 and FM 834 crossing permits with TxDOT Beaumont District. You work with Trinity from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. A route under FM 770 or along West Pine can be scoped from its location, line type, size and footage.

Does Anahuac soil in Daisetta corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 90 percent of Daisetta, including areas mapped as Anahuac soil. The line owner should weigh that risk for steel casing and tracer wire and select any needed coating. HDPE is not subject to that soil corrosion concern, so we can consider it for boring near West End Slough. The final material choice depends on the line and its use near FM 834.

What ground does a Daisetta bore pass through in Anahuac soil?

The USDA soil survey maps Anahuac soil across 59 percent of Daisetta. About 40 inches down, clay is mapped under 68 percent of the area and average clay content is 35 percent. Clay can hold the hole open but stick to the reamer and grip pipe, so a bore near Main Street needs staged reaming and managed fluid.

Will a Daisetta bore hit rock near FM 770?

Bedrock is not mapped in the top five feet along the mapped ground in Daisetta, but that does not rule out rock deeper down. The geologic map identifies the Beaumont Formation, a Pleistocene unit described as predominantly clay. A route near FM 770 still needs field planning for the actual ground along its alignment.

Who approves a Daisetta bore under FM 770?

TxDOT reviews work in the FM 770 right of way through its Beaumont District. The utility owner files the permit application in TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to the owner. The same state highway process applies to FM 834.

Can you bore a line under North Fork Long Island Bayou in Daisetta?

A bore can be planned beneath North Fork Long Island Bayou, which runs 0.34 channel miles inside Daisetta. We plan depth to pass below the channel and check during planning for U.S. Army Corps of Engineers jurisdiction. The route and conditions at the crossing determine the bore plan.

Does Trinity cover Hull and rural sites outside Daisetta?

Yes. We take work in the area around Daisetta, including routes toward Hull, which is 2.2 miles north, and Hardin, 6.2 miles northwest. Rural site access and the route length affect mobilization from our Yukon yard, 480 road miles away. Share the location and line details so we can assess the scope.

How much notice does Texas811 need for a Daisetta bore along Main Street?

The locate request for a Main Street bore must be made at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, submit a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring in Daisetta under FM 770?

The route and scope determine the price. A bore under FM 770 involves state right of way work, while Anahuac soil and heavy clay can affect drilling time and fluid management. We also consider bore length, pipe size, marked utilities, pavement, pits, backfill, drainage crossings and mobilization from Yukon. High profile or emergency work near Old Gulf Road can change the scope, and we plan each job accordingly.

Where the Daisetta facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Daisetta

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Daisetta, Texas

Type the address of your job in Daisetta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Daisetta

Same county: Dayton · Cleveland · Plum Grove · Kenefick · Big Thicket Lake Estates · North Cleveland · Old River-Winfree · Dayton Lakes. All counties: Texas county list.