Giddings Texas Directional Boring: Tabor Soil, US 290 and Cummins Creek
Quick Answer: Tabor fine sandy loam covers much of Giddings, but clay below can grip a reamer and pipe. We do directional boring, also called horizontal directional drilling (HDD), for routes crossing US 290 and Giddings streets. Giddings is 401 road miles from our Yukon, Oklahoma main office, a factor for work near Union Pacific tracks. The mapped heavy clay calls for staged reaming and close fluid control.
Giddings bores at a glance
- County seat of Lee County, Texas. Population 5,324 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 401 miles, about 7.9 hours of driving.
- Ground: Tabor soil is mapped on 45 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 290, US 77, FM 448, FM 141 and FM 2440. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: Union Pacific and Austin Western Railroad, with 14 mapped street and rail crossings.
- Named streams inside the boundary: Cummins Creek and Little Hickory Creek.
- Public water: City of Giddings, groundwater wells.
- Electric: City of Giddings municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near US 290 in Giddings?
Tabor fine sandy loam covers much of Giddings, with clay beneath that can cling to drilling tools. For directional boring in Giddings, we take work across Texas as well. The Census Bureau Vintage 2024 estimate puts the city population at 5,324. We install water, sewer, gas, electric conduit and fiber, including routes along Austin Street or between properties near US 77.
Our main office is in Yukon, Oklahoma, and Giddings work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began as a family business in 1965 and have focused on directional boring since 1982. Our 3/4 inch service lines through 48 inch casing fit utility routes along US 77 and US 290. Bore lengths range from 10 feet to 5,000 feet.

What does the USDA soil survey show for Giddings and Tabor soil?
The USDA soil survey maps Tabor soil across 45 percent of Giddings, mostly as Tabor fine sandy loam with 1 to 3 percent slopes. Zack soil accounts for 25 percent, Gredge 17 percent and Boonville 11 percent. Fine sandy loam is the surface texture across 90 percent of the mapped area; the remainder is gravelly fine sandy loam. At about 40 inches, clay is mapped under 58 percent of the area, and the average clay content there is 37 percent. We use mapped soil patterns for Giddings bore planning, not test borings.
| USDA soil survey, inside the Giddings city limits | What is mapped |
|---|---|
| Soil series mapped | Tabor 45 percent, Zack 25 percent, Gredge 17 percent and Boonville 11 percent |
| Texture at the surface | fine sandy loam 90 percent and gravelly fine sandy loam 10 percent |
| Texture about 40 inches down | clay 58 percent, loam 25 percent and sandy clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 62 percent and lean clay (CL) 38 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 56 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 83 percent of the area |
We plan Giddings bore depths with mapped information showing bedrock is not mapped in the top five feet. The soil survey maps a seasonal water table within 60 inches across 56 percent of the area, so excavation pits may need pumping. We do not see flood prone soils mapped for Giddings, a point to check when planning a crossing. High steel corrosion risk covers 83 percent of the mapped area, a concern for uncoated casing or tracer wire; the line owner chooses materials and coatings. The geologic map names High gravel deposits and Middle Eocene sedimentary rock, including sand, mud, clay and chalk, so deeper conditions can differ from the surface soils.
How do crews bore through clay in Giddings?
Giddings soil maps show clay below the sandy loam surface. On a route near Cummins Creek or US 290, we adjust the drilling fluid and reaming sequence to keep the hole stable without building excess pressure.
- Tabor fine sandy loam sits over clay in the Giddings soil survey, so we use thinner drilling fluid with polymer and ream in stages to limit clay buildup.
- Heavy clay is mapped across 56 percent of the area at about 40 inches, so we watch fluid returns near US 290 to reduce pressure that could lift pavement.
- A seasonal water table is mapped within 60 inches across 56 percent of Giddings; compact pits and pumping can help manage wet excavations near Cummins Creek.
- Before a bore near Austin Street, we hydrovac each marked utility on the route; paint shows its position, while potholing reveals its depth.

What does a bore have to cross in Giddings near Union Pacific?
US 290 has 4.0 mapped roadway miles inside Giddings, and US 77 has 2.7. FM 448, FM 141 and FM 2440 also run within the limits. A bore near these highways needs a route and entry pits planned around pavement and right of way. Austin Street is the city’s longest named street at 4.02 miles, followed by Main Street at 2.57 miles and Hempstead Street at 1.92 miles. Leon Street adds another 1.74 miles of city streets to consider when laying out a route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 290 | US highway | 4 roadway miles inside | State highway office |
| US 77 | US highway | 2.7 roadway miles inside | State highway office |
| FM 448 | State highway | 1.3 roadway miles inside | State highway office |
| FM 141 | State highway | 0.9 roadway miles inside | State highway office |
| FM 2440 | State highway | 0.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 4.18 track miles inside | The railroad |
| Austin Western Railroad | Railroad | 1.16 track miles inside | The railroad |
| Cummins Creek | Stream | 1.33 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Hickory Creek | Stream | 0.64 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Nails Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Persimmon Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Sandy Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Wolf Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Seales Lakes | Lake or pond | 16 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific has 4.18 track miles in Giddings, and Austin Western Railroad has 1.16. Public mapping shows 14 street and rail crossings, so a proposed route needs checking against both rail owners’ tracks. Cummins Creek runs 1.33 channel miles inside the city and Little Hickory Creek runs 0.64; three mapped street crossings intersect named streams. Creek work needs depth planning, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Seales Lakes lies outside the city limits within one mile.
Who approves a bore in Giddings and Lee County?
Since Giddings is incorporated, we treat its city streets as city property when planning crossings. Work in the right of way of US 290, US 77, FM 448, FM 141 or FM 2440 needs a TxDOT utility permit reviewed by the Austin District. The line owner files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. TxDOT requires lines beneath existing highway pavement to be bored or tunneled. A Union Pacific or Austin Western track crossing needs an agreement with that railroad, which sets crossing conditions. Creek crossings near Cummins Creek are checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are in the ground near the City of Giddings water system?
The City of Giddings public water system draws from groundwater wells and reports 2,626 service connections serving 7,878 people. Its municipal electric system is city owned. Before planning an electric conduit bore along Austin Street or another route, we confirm which line owner is involved. In Lee County, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Fayette Electric Cooperative also report electric service; that countywide list does not identify the provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Giddings | Public water system | Groundwater wells | 2,626 connections, 7,878 people served |
| City of Giddings municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 2,790 customers reported |
| Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Fayette Electric Cooperative | Electric utilities reporting service in Lee County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Giddings’ median housing year at 1985. For underground work in Giddings, the survey estimates 26 percent of homes were built before 1960, 48 percent from 1960 to 1999 and 26 percent in 2000 or later. A project on Main Street may replace older service or bring a new connection to newer construction. We use hydrovac potholing to expose marked lines before drilling near them; paint gives a line’s position, not its depth.

Where is Giddings in relation to Paige?
Giddings is in Lee County, covers 5.28 square miles and sits at an elevation of 499 feet. Its ZIP code is 78942. Paige is 12.0 miles west; Dime Box is 13.4 miles northeast, and Carmine is 14.4 miles east. Giddings is the Lee County seat. Bastrop, the nearest larger city listed, is 23.8 miles west. From our Yukon, Oklahoma main office, the road distance is 401 miles and the drive is 7.9 hours. That distance can affect mobilization for a bore near US 290.
Places near Giddings
- Directional boring in Paige: 12 miles west
- Directional boring in Dime Box: 13.4 miles northeast
- Directional boring in Carmine: 14.4 miles east
- Directional boring in Round Top: 16.2 miles southeast
- Directional boring in Lexington: 16.7 miles north
- Directional boring in Bastrop: 23.8 miles west
What boring work comes up near Main Street in Giddings?
- Highway crossing: A route beneath US 290 can keep the roadway intact, with bore limits and pits planned outside the travel lanes.
- Water service: A connection near the City of Giddings groundwater system needs its route checked against marked lines along Austin Street.
- Fiber conduit: A Main Street route can carry conduit below pavement and driveways without opening a trench across the street.
- Creek crossing: A bore near Cummins Creek needs channel depth planning and a jurisdiction check during project planning.
- Rail crossing: A proposed route beneath Union Pacific track needs the railroad’s crossing agreement and its conditions built into the bore plan.
- Street connection: A service near Leon Street can be routed around existing utilities after marked lines are exposed by potholing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Leon Street in Giddings?
For a route near Leon Street, start with the address or map pin. Tell us what will go underground, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show whether the route approaches US 77, a Union Pacific track or a creek.
In Giddings, mapped clay is a leading price factor because sticky ground can call for staged reaming and careful fluid control. The number of marked utilities to expose, pipe size and bore length also shape the work. Pavement along US 290, a Union Pacific crossing, creek pits, concrete and sand backfill can add steps. Mobilization matters too: Giddings is 401 road miles from our Yukon main office. High profile or emergency work can change the job plan.
Questions people ask about boring in Giddings
Does Trinity take directional boring jobs in Giddings and Lee County?
Yes. For directional boring in Giddings, we take work across Texas as well. Our main office is in Yukon, and our crews or vetted partner contractors can staff work in Lee County. You deal with Trinity from the first call through the bore log, including on a route near US 77.
Does Tabor soil in Giddings corrode steel, and what pipe can I use?
The soil survey maps high steel corrosion risk across 83 percent of Giddings, so the line owner should consider casing and tracer wire materials. For Giddings work, HDPE is not affected by this soil corrosion concern when we plan a bore. Tabor fine sandy loam is the main mapped soil series, but the owner selects the material and any coating.
What ground does a bore pass through in Giddings Tabor soil?
The USDA soil survey maps Tabor soil across 45 percent of Giddings, with fine sandy loam common at the surface. At about 40 inches, clay is mapped under 58 percent of the area, and the average clay content is 37 percent. Those mapped patterns help guide planning, but they are not test borings along a specific route.
Will our directional bore in Giddings encounter rock while crossing US 290?
Bedrock is not mapped in the top five feet of Giddings, but that does not establish conditions at a planned bore depth. The geologic map lists High gravel deposits and Middle Eocene sedimentary units that include sand, mud, clay and chalk. A route near US 290 still needs conditions considered at its actual depth.
Who approves our bore under US 290 in Giddings before we schedule that highway crossing?
For work in the US 290 right of way, the line owner applies for a TxDOT utility permit through RULIS. The TxDOT Austin District reviews it. We provide the bore plan and profile for the owner’s application and work under the permit issued to that owner.
What does our Giddings bore under Union Pacific track require before we plan the crossing?
A crossing beneath Union Pacific’s 4.18 track miles in Giddings needs an agreement from the railroad that owns the track. For a Giddings crossing under Union Pacific track, that agreement sets conditions for casing, depth and flagging. If the route also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.
How far is Giddings from Yukon, and does nearby Bastrop change the job?
From our Yukon, Oklahoma main office, Giddings is 401 road miles away and a 7.9 hour drive. Bastrop is 23.8 miles west of Giddings, but the job’s location and scope determine the work plan. The Yukon distance can affect mobilization for a route near US 77 or another local crossing.
How much notice does Texas811 need for a Giddings bore near Austin Street?
Submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For an Austin Street start that moves more than 14 days past the original notice, make a new request. If marks wear away or move, request refreshed marks before work continues.
What factors affect our directional boring cost in Giddings near US 290?
The route, footage and pipe or conduit size matter, as do Giddings’ mapped clay, utilities to expose, pavement, pits and any creek or railroad crossing. A bore near US 290 may involve highway right of way planning, while a Union Pacific crossing brings separate coordination. Mobilization from Yukon is also part of the job scope.
Where the Giddings facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Giddings
- U.S. Census Bureau, TIGER/Line 2024: Giddings boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Giddings
- U.S. Census Bureau, American Community Survey 2019 to 2023: Giddings housing units and year built
- Macrostrat geologic map compilation: map units under Giddings
- U.S. EPA Safe Drinking Water Information System: public water systems serving Giddings
- U.S. Department of Transportation, North American Rail Network: track owners in Lee County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lee County
- U.S. Geological Survey, Elevation Point Query Service: Giddings elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Giddings
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Giddings
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Giddings, Texas
Type the address of your job in Giddings. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Giddings
All counties: Texas county list.
