trinityboringsolutions.com

Oakwood Texas Directional Boring: Rader Soil, US 79 and Toms Creek

Quick Answer: Rader soil is mainly fine sandy loam, with sandy clay mapped below; sticky clay can build up on a reamer. We do directional boring, also called horizontal directional drilling (HDD), for routes crossing US 79 in Oakwood, Texas. The Yukon main office is 342 road miles away, and Buffalo is 15.4 miles southwest. On a Toms Creek route, we plan for wet ground and keep the channel crossing intact.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oakwood bores at a glance

  • Incorporated city in Leon County and Freestone County, Texas. Population 405 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 342 miles, about 6.6 hours of driving.
  • Ground: Rader soil is mapped on 61 percent of the area, with sandy clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 79 and FM 542. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Toms Creek.
  • Public water: City of Oakwood, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Oakwood and Leon County?

Rader fine sandy loam covers much of Oakwood, so a bore plan has to account for clay that can cling to the reamer. We take directional boring work in Leon County, where the Census Bureau Vintage 2024 estimate puts Oakwood at 405 people. Water, sewer, gas, electric conduit and fiber can be routed beneath Broad Street or US 79 without cutting the surface.

Our main office is in Yukon, Oklahoma, and Oakwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started directional boring in 1982, after our family business began in 1965. Four decades of boring help us plan for Oakwood’s Rader soil, where sticky clay can load the reamer and grip pipe.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Oakwood ground like to bore in Rader soil?

The USDA soil survey maps Rader fine sandy loam, 1 to 3 percent slopes, across 61 percent of Oakwood. Fine sandy loam is the leading surface texture, while sandy clay accounts for 61 percent of the mapped soil at about 40 inches below the surface. Oakwood’s mapped patterns are not test borings, so we treat them as planning context rather than confirmed conditions for a bore. The sandy surface may drill readily, but clay deeper down can cling to the cutting tools and swell against the product pipe. We plan the reaming and fluid for both layers, rather than treating Oakwood as uniform ground.

USDA soil survey, inside the Oakwood city limitsWhat is mapped
Soil series mappedRader 61 percent, Burleson 9 percent, Pickton 9 percent, Wolfpen 7 percent and Hatliff 7 percent
Texture at the surfacefine sandy loam 69 percent, loamy fine sand 16 percent and clay 9 percent
Texture about 40 inches downsandy clay 61 percent, clay 16 percent and loamy fine sand 16 percent
Engineering class about 40 inches downfat clay (CH) 76 percent, silty clayey sand (SC SM) 10 percent and clayey sand (SC) 7 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches78 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel84 percent of the area

Bedrock is not mapped in Oakwood’s top five feet, so we use that depth information carefully when planning bore depths. A seasonal water table is mapped within 60 inches across 78 percent of the area, so pits may need pumping. Flood prone soils cover 7 percent, a consideration near Toms Creek. High steel corrosion risk is mapped across 84 percent; the line owner should consider casing and tracer wire materials. The map includes Holocene alluvial gravelly sand, with stream deposits that may mix sand, silt and clay, and Lutetian Queen City Sand, which includes sandstone and claystone.

How do we bore Oakwood’s sandy clay ground?

Oakwood’s sandy clay at about 40 inches can stick to tooling, while mapped seasonal water can affect pits. We match the fluid and reaming sequence to the route, including crossings near Toms Creek.

  1. In Oakwood’s Rader soil, we use a thinner drilling fluid with polymer and ream in stages to limit sticky clay building up on the tooling.
  2. Because sandy clay is mapped at about 40 inches, we watch fluid returns closely near Broad Street pavement and pull the pipe after opening the hole.
  3. Seasonal water is mapped within 60 inches across much of Oakwood, so we keep pits small and pump them if groundwater collects.
  4. At Toms Creek, we track the drill head from the surface, log depth and pitch, and plan the bore below the channel without cutting its banks.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Which roads, tracks or creeks can a bore cross in Oakwood near US 79?

US 79 runs 1.6 mapped roadway miles inside Oakwood, and FM 542 adds 0.4 miles. A bore beneath either highway needs a route and depth suited to the crossing. Broad Street is the longest named street at 1.57 miles in town, followed by Walston Street at 0.9 miles and Main Street at 0.75 miles. Knowles Street and Holly Street are also among the longer routes. These streets give practical corridors for service lines, while a bore can leave pavement and sidewalks uncut.

CrossingTypeMapped extentWho has a say
US 79US highway1.6 roadway miles insideState highway office
FM 542State highway0.4 roadway miles insideState highway office
Union PacificRailroad2.3 track miles insideThe railroad
Toms CreekStream1.02 channel miles insideChecked for Corps of Engineers jurisdiction
Northwest ForkStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 2.3 track miles inside Oakwood on the Hearne Subdivision, and public mapping shows 3 street and rail crossings. A route beneath the tracks needs the railroad’s crossing agreement. Toms Creek runs 1.02 channel miles through town, with 6 mapped street crossings of named streams. A creek bore can pass below the channel without cutting its banks; planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. With no lakes or ponds mapped within one mile of Oakwood, we use that information when reviewing bore routes.

Who approves an Oakwood bore near Union Pacific tracks?

Oakwood is incorporated, so we plan street boring with the city as owner of its streets. A bore under US 79 or FM 542 needs a TxDOT utility permit; the TxDOT Bryan District reviews it. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that application. At a US 79 crossing, TxDOT cover requirements set the starting depth: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches. The permit can set another depth. Work beneath existing highway pavement is bored or tunneled. A Union Pacific track crossing needs an agreement with the railroad, which sets crossing conditions. Toms Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near the City of Oakwood water system?

The City of Oakwood public water system uses groundwater wells and lists 300 service connections serving 389 people. That system is a useful reference when planning a water service bore near Main Street, but the specific line and route still need to be identified. Leon County electric service is reported by Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative. We confirm the line owner for a proposed electric conduit before planning the bore; those county reports do not identify the provider at every Oakwood address.

Line ownerWhat it isSourceSize
City of OakwoodPublic water systemGroundwater wells300 connections, 389 people served
Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Leon County and Freestone CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Oakwood’s median housing year at 1964, which we consider in underground planning. Oakwood’s estimates put 46 percent before 1960, 46 percent from 1960 to 1999, and 8 percent in 2000 or later, which we consider in underground planning. Housing age does not establish the age or location of buried lines, so a replacement bore along Walston Street starts with locating and exposing marked utilities. Hydrovac potholes show their depth before the drill approaches; paint alone shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Oakwood from Buffalo and other nearby places?

Oakwood lies in Leon County and Freestone County, with 92 percent of the town in Leon County, at an elevation of 282 feet. Its land area is 1.13 square miles, and ZIP code 75855 covers the town. Buffalo is 15.4 miles southwest; Elkhart is 16.2 miles east; and Palestine, the nearest larger city, is 16.7 miles northeast. Centerville, the Leon County seat, is 23.8 miles south. From Trinity’s Yukon, Oklahoma main office, Oakwood is 342 road miles and a 6.6 hour drive, which affects crew and equipment mobilization for a US 79 project.

Places near Oakwood

What boring work comes up in Oakwood near Walston Street?

  • Highway crossing: A bore beneath US 79 keeps the route below the travel lanes, with depth and pavement requirements addressed in the TxDOT permit.
  • Water service: A connection near the City of Oakwood system can be bored beneath Main Street, with the route checked against marked utilities.
  • Fiber conduit: A run along Broad Street can pass beneath pavement, while hydrovac potholes expose marked lines before drilling approaches.
  • Creek crossing: A Toms Creek bore is planned below the channel, with the crossing checked for Corps jurisdiction.
  • Rail crossing: A route beneath Union Pacific tracks on the Hearne Subdivision needs the railroad’s crossing agreement and specified conditions.
  • Street replacement: A sewer or water line near Walston Street can be bored to avoid an open cut through the paved route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of Oakwood boring near Broad Street?

For a Broad Street quote, start with the address or a map pin. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show whether the route approaches US 79, Union Pacific tracks or Toms Creek. Those details let us review the route and the work area before pricing it.

Price follows the work involved. Rader soil and sandy clay affect drilling and reaming; US 79 and Union Pacific crossings add coordination and exposure work. Toms Creek may mean creek crossing planning, while pavement, concrete, pits, excavator time and sand backfill also shape the scope. Pipe size, bore length and the number of marked utilities to expose matter too. Oakwood is 342 road miles from Yukon, so mobilization is part of planning for a job this far from the main office.

Questions people ask about boring in Oakwood

Does Trinity take directional boring jobs in Oakwood and Leon County, and who staffs them?

Yes. We take directional boring work in Oakwood, where incorporated city streets are city owned, and across Texas. Work is handled by our own crews or by partner drilling contractors from satellite yards we have vetted. For Oakwood street work, we keep Trinity involved from the first call through the bore log, whichever crew is on site. For a route near Broad Street, send the location and line details so we can assess the scope.

Can a line be bored under Toms Creek in Oakwood?

Yes, a line can be planned beneath Toms Creek without cutting the channel banks. The creek runs 1.02 channel miles in Oakwood, and mapped street crossings of named streams total 6. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and we consider the mapped seasonal water and flood prone soils.

When we plan directional boring in Oakwood, who runs the public water system, and where does its water come from?

The City of Oakwood owns the public water system, which draws from groundwater wells. Public records list 300 service connections serving 389 people. For a proposed water bore near Main Street, the system information helps identify the local context, but the specific line and route still need confirmation.

Which electric company serves an Oakwood address in Leon County, and who confirms conduit details?

The provider depends on the address. Electric service reporting for Leon County includes Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative. Those records do not assign a provider to every location. We confirm the line owner and conduit requirements before planning an electric conduit bore near US 79.

Who controls Oakwood streets such as Main Street, and does a bore require cutting one?

Oakwood is incorporated, so its city streets, including Main Street, belong to the city. Directional boring can place a line beneath pavement without an open cut through the street. The route still needs planning around marked utilities, and any highway right of way such as US 79 follows TxDOT permitting requirements.

What do Oakwood’s housing ages mean for replacement bores near Walston Street?

Oakwood’s median housing year is 1964, and the American Community Survey estimates 46 percent of homes were built before 1960. That does not date buried utilities, but older streets such as Walston Street may be considered for replacement routes. We locate and hydrovac expose marked lines before drilling near them.

How much 811 notice does an Oakwood bore near Broad Street need, and what if marks change?

Count back at least two working days from a planned Broad Street start, excluding Saturdays, Sundays and legal holidays. Texas law allows a request no earlier than 14 days before excavation. If the start slips more than 14 days past the original notice, make a new request through Texas811. On Oakwood streets, we have worn or moved marks refreshed before boring work continues.

How far is Oakwood from Trinity’s Yukon office, and does Palestine affect the job?

Oakwood is 342 road miles from our Yukon, Oklahoma main office, a 6.6 hour drive we factor into boring work schedules. Palestine is 16.7 miles northeast and is the nearest larger city, but the project location and route determine the work. Distance from Yukon can affect mobilization for a bore near US 79 or Toms Creek.

What affects the cost of directional boring in Oakwood under US 79?

The route, pipe or conduit size, footage and ground all affect the scope. Sandy clay in Oakwood can shape reaming, while a US 79 crossing brings highway requirements and Union Pacific tracks may require separate coordination. Utility potholing, pavement, pits, creek crossings and mobilization from Yukon also factor into pricing. We assess the job details rather than using one factor alone.

Where the Oakwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oakwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oakwood, Texas

Type the address of your job in Oakwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oakwood

County: Freestone County directional boring. Same county: Teague · Wortham · Streetman · Kirvin · Hilltop Lakes · Centerville · Jewett · Normangee · Marquez · Leona. All counties: Texas county list.