Centerville Texas Directional Boring: Oakwood Soil, Spring Creek and Interstate 45
Quick Answer: Interstate 45 and Spring Creek are key crossings for directional boring in Centerville, and Trinity Boring Solutions also performs horizontal directional drilling (HDD) in Texas. Centerville is 342 road miles from our Yukon, Oklahoma main office, so distance matters for mobilization near Feeder Road. Oakwood soil and sandy clay loam can hold a bore open but may cling to the reamer. Under Interstate 45, the route and pavement affect the bore plan.
Centerville bores at a glance
- County seat of Leon County, Texas. Population 1,001 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 342 miles, about 6.6 hours of driving.
- Ground: Oakwood soil is mapped on 25 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 24 percent of the area.
- Highways inside the boundary: Interstate 45, Texas State Highway 75, Texas State Highway 7 and FM 1119. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Spring Creek, Little Beaver Creek, Cattail Branch and Bain Branch.
- Public water: City of Centerville, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Spring Creek in Centerville?
Interstate 45 and Spring Creek are among the features our crews plan around when we install water, sewer, gas, electric conduit and fiber in Centerville. The Census Bureau Vintage 2024 estimate puts the population at 1,001 in Leon County. A water service could follow a street toward a home, while a fiber or electric conduit route may need to cross Feeder Road or a mapped creek.
Our main office is in Yukon, Oklahoma, and Centerville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short service near St Marys Street could use a 3/4 inch service line, while a larger Interstate 45 crossing may call for 48 inch casing. We are a family business started 1965, with directional boring work dating to 1982.

What ground does Oakwood soil mean for a Centerville bore?
The USDA soil survey maps Oakwood soil across 25 percent of Centerville, with Trawick at 24 percent and Kirvin at 15 percent. Surface texture is mostly fine sandy loam at 63 percent, while loamy fine sand covers 24 percent. About 40 inches down, sandy clay loam is mapped under 47 percent of the area, clay under 27 percent and loamy fine sand under 13 percent. Oakwood, Trawick, Kirvin, and Wolfpen are mapped soil patterns; we do not treat them as test borings. A route near Spring Creek still needs site specific checks.
| USDA soil survey, inside the Centerville city limits | What is mapped |
|---|---|
| Soil series mapped | Oakwood 25 percent, Trawick 24 percent, Kirvin 15 percent, Wolfpen 10 percent and Hatliff 9 percent |
| Texture at the surface | fine sandy loam 63 percent, loamy fine sand 24 percent and paragravelly clay loam 12 percent |
| Texture about 40 inches down | sandy clay loam 47 percent, clay 27 percent and loamy fine sand 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 36 percent, fat clay (CH) 27 percent and silty clayey sand (SC SM) 12 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | 24 percent of the area (0 percent hard rock, 24 percent weathered rock) |
| Seasonal water table within 60 inches | 37 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 73 percent of the area |
The survey maps bedrock within 60 inches across 24 percent of Centerville, all weathered, with bedrock within 40 inches across 12 percent; hard bedrock is not mapped within 60 inches. Seasonal water tables occur within 60 inches across 37 percent, so pits near Spring Creek may need pumping. Flood prone soils cover 9 percent. High steel corrosion risk is mapped across 73 percent, a material concern for casing and tracer wire. The Queen City Sand, an Eocene unit of sand and clay, also points to changing ground along a bore.
How do crews bore Centerville’s sandy clay loam?
Centerville has fine sandy loam at the surface and sandy clay loam mapped about 40 inches down. We check the actual route, keep the bore controlled and prepare the pipe before opening the hole.
- Where Oakwood soil gives way to sandy clay loam, we adjust fluid and ream in stages so sticky material does not build up on the reamer.
- With loamy fine sand mapped in Centerville, we keep the pipe ready before the final ream and use drilling fluid to help support the hole.
- Seasonal water tables are mapped within 60 inches across 37 percent of the city, so pits near Spring Creek may need pumping and compact work areas.
- At marked utilities along Cass Street, we use hydrovac potholing to check depth before the drill approaches; a locator reading alone does not show depth.

Which roads and creeks can a Centerville bore cross near Feeder Road?
Interstate 45 has 3.1 mapped roadway miles inside Centerville, while Texas State Highway 75 has 1.6 and Texas State Highway 7 has 1.4. Feeder Road is the longest named street at 2.52 miles, followed by Cass Street at 2.0 and Commerce Street at 1.6. A bore near these routes must account for the specific road corridor and pavement. On a state highway, TxDOT rules call for boring or tunneling beneath existing pavement rather than open trenching.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 45 | Interstate | 3.1 roadway miles inside | State highway office |
| Texas State Highway 75 | State highway | 1.6 roadway miles inside | State highway office |
| Texas State Highway 7 | State highway | 1.4 roadway miles inside | State highway office |
| FM 1119 | State highway | 0.1 roadway miles inside | State highway office |
| Spring Creek | Stream | 1.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Beaver Creek | Stream | 0.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cattail Branch | Stream | 0.55 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bain Branch | Stream | 0.24 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Beaver Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Mill Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Centerville or within 1 mile outside its limits, and no street and rail crossing is mapped in the city. Spring Creek runs 1.19 channel miles through Centerville, and 12 street crossings of named streams are mapped. Little Beaver Creek adds 0.93 channel miles, with Cattail Branch and Bain Branch also mapped. With Spring Creek inside Centerville, we check water features during crossing planning; no lakes or ponds are mapped within 1 mile. A creek route needs depth planning and a check for federal waterway jurisdiction.
Who approves a Centerville bore in Leon County?
Centerville is incorporated, so its public city streets belong to the city. For work in Interstate 45, Texas State Highway 75, Texas State Highway 7 or FM 1119 right of way, the line owner, not the driller, applies for a TxDOT utility permit through RULIS. The TxDOT Bryan District reviews the application. We prepare the bore plan and profile for the owner and work under its permit. TxDOT cover rules depend on the line: electric and communication crossings need 60 inches, while water crossings need 60 inches. The district may set another depth. Spring Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Centerville system?
The City of Centerville public water system uses groundwater wells and reports 693 service connections for 903 people. That water network is a key reference when planning a service route near Cass Street. Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative report electric service in Leon County. We confirm the line owner for the specific address before planning an electric conduit bore, since the county list does not identify the provider at each location.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Centerville | Public water system | Groundwater wells | 693 connections, 903 people served |
| Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative | Electric utilities reporting service in Leon County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Centerville’s median housing year at 1979, context we consider when planning underground work along Cass Street. It estimates 9 percent of homes were built before 1960, 82 percent from 1960 to 1999 and 9 percent in 2000 or later. Along Cass Street, older water, sewer or electric lines could share a route with a new service. We hydrovac pothole marked utilities before drilling near them because paint shows position, not depth.

Where is Centerville in relation to Crockett and Yukon?
Centerville is the Leon County seat, with an elevation of 354 feet and a land area of 1.79 square miles. ZIP code 75833 covers the city. Leona is 7.2 miles south, Jewett is 12.2 miles northwest, and Buffalo is 14.8 miles north. Crockett, the nearest larger city, is 31.1 miles east. Interstate 45 runs through Centerville, which is 342 road miles and a 6.6 hour drive from our Yukon, Oklahoma main office; that distance is part of planning crew mobilization.
Places near Centerville
- Directional boring in Leona: 7.2 miles south
- Directional boring in Jewett: 12.2 miles northwest
- Directional boring in Buffalo: 14.8 miles north
- Directional boring in Marquez: 16.5 miles west
- Directional boring in Normangee: 17.7 miles southwest
- Directional boring in Crockett: 31.1 miles east
What boring work comes up near Cass Street in Centerville?
- Highway crossing: A bore beneath Interstate 45 needs a route and profile suited to the highway right of way and pavement.
- Water service: A connection near Cass Street can be planned against the City of Centerville groundwater system and existing marked lines.
- Fiber conduit: A route along Feeder Road may need potholing where marked utilities cross the planned bore path.
- Creek crossing: A Spring Creek bore needs depth planning beneath the channel and a check for U.S. Army Corps of Engineers jurisdiction.
- Street crossing: A bore beneath St Marys Street can leave the pavement uncut while pits sit in dirt on each side.
- Electric conduit: Near Interstate 45, we confirm the line owner before planning the route and any right of way permit.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Centerville work near Interstate 45?
A map pin matters near Interstate 45 because a route close to the highway can change the right of way and pavement plan. For a crossing on Commerce Street, send us the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us trace the proposed route toward Feeder Road or Spring Creek.
For a Centerville route, soil and creek conditions come first because Oakwood soil and sandy clay loam can change reaming and fluid needs, while Spring Creek may add crossing planning. The number of utilities to expose and any concrete or pavement also affect the work. Pipe size, bore length, pits, sand backfill and excavator time shape the scope. Interstate 45 work may involve a state permit, and mobilization reflects the 342 road miles from Yukon.
Questions people ask about boring in Centerville
Does Trinity take directional boring jobs in Centerville and Leon County?
Yes. We take directional boring work in Centerville and across Texas, with our own crews and satellite yards run by partner drilling contractors we have vetted. From the first call through the bore log, we coordinate with you on crossings near Texas State Highway 75, regardless of which crew is on site. Routes near Spring Creek are planned around the actual crossing.
What does Oakwood soil mean for a bore in Centerville?
The USDA soil survey maps Oakwood soil across 25 percent of Centerville. About 40 inches below the surface, sandy clay loam is mapped across 47 percent and clay across 27 percent. Those patterns help frame the plan, but we check the actual ground along the proposed route, including near Feeder Road.
How much bedrock is mapped within five feet in Centerville?
The USDA soil survey maps bedrock within 60 inches across 24 percent of Centerville, and the mapped bedrock there is weathered. Bedrock within 40 inches covers 12 percent, while hard bedrock is not mapped within 60 inches. A route near Spring Creek still needs field checks because mapped conditions do not define every bore path.
Who approves a bore under Interstate 45 in Centerville?
The line owner applies for a TxDOT utility permit when the work is in Interstate 45 right of way. The TxDOT Bryan District reviews the RULIS application, and Trinity prepares the bore plan and profile for the owner. A route near Feeder Road outside state right of way has a different approval path.
Can a utility line be bored under Spring Creek in Centerville?
A bore under Spring Creek can be planned if the route and ground conditions support it. The creek runs 1.19 channel miles in Centerville, so the plan needs a suitable depth beneath the channel. For a planned crossing at Little Beaver Creek, we check US Army Corps of Engineers jurisdiction during planning.
Who runs Centerville’s public water system in Leon County, and where does its water come from?
The City of Centerville owns the public water system, which uses groundwater wells. Public records report 693 service connections serving 903 people. For a new water bore near Cass Street, we still need to locate and expose marked lines along the proposed route.
What bore sizes and lengths can Trinity handle for a Centerville job near St Marys Street?
Along Frontage Road, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size for work near St Marys Street depends on what the line carries, the route and the ground conditions. A map or sketch helps establish the scope.
How early should I call Texas811 for a Centerville bore near Feeder Road?
Paint along Feeder Road shows utility position, not depth. Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Centerville near Interstate 45?
Soil and crossings matter first: sandy clay loam, Spring Creek and Interstate 45 can affect drilling, access and planning. The price also reflects bore length and size, utilities to expose, pavement, pits, backfill and excavator time. Centerville’s 342 road miles from Yukon can affect mobilization. We need the route and scope to assess the job.
Where the Centerville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Centerville
- U.S. Census Bureau, TIGER/Line 2024: Centerville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Centerville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Centerville housing units and year built
- Macrostrat geologic map compilation: map units under Centerville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Centerville
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Leon County
- U.S. Geological Survey, Elevation Point Query Service: Centerville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Centerville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Centerville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Centerville, Texas
Type the address of your job in Centerville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Centerville
Same county: Hilltop Lakes · Oakwood. All counties: Texas county list.
