Normangee Texas Directional Boring: Benchley Clay Loam, BNSF Railway, Caney Creek
Quick Answer: Can we put your line beneath FM 39, BNSF Railway or Caney Creek without cutting across the surface? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings like these in Normangee, Texas. The Yukon main office is 363 road miles away, and a route near County Line Road helps us plan mobilization. Benchley clay loam covers 41 percent of town, so sticky clay can cling to the reamer and needs careful fluid control.
Normangee bores at a glance
- Incorporated city in Leon County and Madison County, Texas. Population 547 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 363 miles, about 7.1 hours of driving.
- Ground: Benchley soil is mapped on 41 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: FM 39 and FM 3. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Caney Creek and Town Creek.
- Public water: City of Normangee, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Normangee near BNSF Railway?
Can we put your line beneath BNSF Railway, FM 39 or a street without cutting the surface? We take directional boring work in Normangee, in Leon and Madison counties. The Census Bureau Vintage 2024 estimate puts the town population at 547. Our crews install water, sewer, gas, electric conduit and fiber, including service routes along 2nd Street or connections approaching the City of Normangee water system.
Our main office is in Yukon, Oklahoma, and Normangee work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. For a line near FM 39, our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet.

What is Benchley soil like to bore in Normangee?
The USDA soil survey maps Benchley soil across 41 percent of Normangee, mostly as Benchley clay loam on 1 to 3 percent slopes. Crockett series covers 36 percent, with Gowker, Bremond and Dimebox making up the rest. At about 40 inches below the surface, clay is mapped across 91 percent of the area, and average clay content is 44 percent. For Normangee, we use mapped soil patterns as planning context, not as substitutes for project specific test borings. For a bore near Caney Creek, the heavy clay can hold a hole open but may stick to the reamer or grip pipe.
| USDA soil survey, inside the Normangee city limits | What is mapped |
|---|---|
| Soil series mapped | Benchley 41 percent, Crockett 36 percent, Gowker 9 percent, Bremond 8 percent and Dimebox 6 percent |
| Texture at the surface | clay loam 50 percent, fine sandy loam 35 percent and loam 9 percent |
| Texture about 40 inches down | clay 91 percent and clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 56 percent and lean clay (CL) 44 percent |
| Average clay content about 40 inches down | 44 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 9 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
Bedrock is not mapped in the top five feet as a general condition for Normangee, though the survey maps it within 60 inches on 1 percent of the area; typical depth is 53 inches. Seasonal water tables and flood prone soils each occur on 9 percent, so creek side pits need attention to water and channel depth. High steel corrosion risk is mapped across 100 percent, a concern for uncoated casing or tracer wire; the line owner chooses coatings, while HDPE is unaffected. The Cook Mountain Formation, of Bartonian age, includes clay and marly sand, so deeper ground may still slow drilling.
How do we drill through clay in Normangee?
Benchley clay loam and the clay mapped at about 40 inches call for controlled drilling. Around Caney Creek or FM 39, we plan fluid use and the bore path to protect the surface and keep the line on grade.
- Benchley clay can ball up on a reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe near County Line Road.
- Because heavy clay is mapped across Normangee at about 40 inches, we watch fluid returns near FM 39 to avoid pressure lifting pavement.
- At Caney Creek, we plan the bore below the channel and check the crossing for Corps jurisdiction; pits on both banks stay in dirt.
- For marked utilities along 2nd Street, we hydrovac to expose each line before drilling nearby, then track the head and record depth and pitch.

Which roads, tracks or creeks can a Normangee bore cross near Caney Creek?
FM 39 and FM 3 run through Normangee, with 1.4 mapped roadway miles of FM 39 and 0.8 of FM 3 inside town. County Line Road and Old San Antonio Road are the longest named streets at 2.27 miles each in town; Main Street adds 1.34 miles. A bore beneath pavement avoids cutting across the road, driveway or sidewalk. The route still needs to account for marked utilities and the pavement limits, especially where FM 39 meets local streets.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 39 | State highway | 1.4 roadway miles inside | State highway office |
| FM 3 | State highway | 0.8 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.68 track miles inside | The railroad |
| Caney Creek | Stream | 1.1 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Town Creek | Stream | 0.94 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Caney Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Iron Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Carryall Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Cobbs Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 1.68 track miles inside Normangee, and public mapping shows 2 street and rail crossings. A crossing beneath its track needs an agreement with BNSF Railway that sets the crossing conditions. Caney Creek runs 1.1 channel miles in town and Town Creek runs 0.94; mapping shows 9 street crossings of named streams. With no lakes or ponds mapped within one mile of Normangee, we can consider that when planning route options. Creek work is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who approves a Normangee bore near Leon County roads?
Normangee is incorporated, so its city streets belong to the city, while work in FM 39 or FM 3 right of way needs a TxDOT utility permit. The line owner, not the drilling contractor, files through TxDOT RULIS, and the TxDOT Bryan District reviews the application. We prepare the bore plan and profile for the line owner to submit, then work under the permit issued to that owner. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade; water lines also need 60 inches, and pressurized sewer lines need 60 inches. BNSF Railway sets its own track crossing conditions by agreement, and Caney Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Normangee near the City of Normangee water system?
The City of Normangee public water system uses groundwater wells and reports 363 service connections serving 719 people. That gives a water service bore near Main Street a local system to coordinate with, but the line location still needs verification. Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative report electric service in Leon County. We confirm the electric line owner for the address before planning a conduit bore, since county service reporting does not identify a provider for every location.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Normangee | Public water system | Groundwater wells | 363 connections, 719 people served |
| Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative | Electric utilities reporting service in Leon County and Madison County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Normangee’s median housing year at 1994: 17 percent of homes were built before 1960, 39 percent from 1960 to 1999, and 44 percent in 2000 or later. A replacement line along 2nd Street may meet older utilities, while a newer service may need a different route. We hydrovac pothole marked lines on the bore path first; paint shows position, not depth.

What is near Normangee, including Leona?
Normangee spans Leon County and Madison County, with 76 percent of the town in Leon County and 24 percent in Madison County. It covers 1.12 square miles, sits at 378 feet elevation and uses ZIP code 77871. Hilltop Lakes is 5.0 miles northwest; Leona is 11.9 miles northeast; Madisonville is 13.3 miles southeast; Marquez is 16.5 miles northwest; and Centerville, the Leon County seat, is 17.7 miles northeast. Bryan is 29.7 miles southwest. The Yukon yard is 363 road miles away, a 7.1 hour drive, so County Line Road work has a real mobilization component.
Places near Normangee
- Directional boring in Hilltop Lakes: 5 miles northwest
- Directional boring in Leona: 11.9 miles northeast
- Directional boring in Madisonville: 13.3 miles southeast
- Directional boring in Marquez: 16.5 miles northwest
- Directional boring in Centerville: 17.7 miles northeast
- Directional boring in Bryan: 29.7 miles southwest
What kinds of bores come up near County Line Road in Normangee?
- Highway crossing: A bore beneath FM 39 keeps the line below the travel lanes and avoids opening the existing pavement.
- Water service: A connection near the City of Normangee system needs a route that accounts for existing groundwater well distribution lines.
- Fiber route: A conduit bore along County Line Road can carry communications past marked services without cutting the street surface.
- Creek crossing: A Caney Creek bore needs a path planned beneath the channel and review for Corps jurisdiction.
- Rail crossing: A bore under BNSF Railway track needs the railroad agreement to set casing, depth and flagging conditions.
- Street service: A water or sewer line near 2nd Street can use a bore to cross pavement while crews expose marked utilities first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Normangee bore near 2nd Street?
For a route near 2nd Street, start with the address or map pin so we can place the work. Tell us what is going underground, such as a water line serving the City of Normangee system, then give the pipe or conduit size and the footage. A sketch or plans showing a crossing at FM 39 or Caney Creek help us understand the path.
The 363 road miles from Yukon affect mobilization for a Normangee job, and the 41 percent Benchley soil share gives us ground conditions to consider. Price also reflects bore length, pipe size, clay or rock, utilities to expose, pavement, and crossings such as BNSF Railway or Caney Creek. Pits, excavator time and sand backfill may affect the work too. A high profile or emergency schedule can change the work plan.
Questions people ask about boring in Normangee
Does Trinity Boring Solutions take jobs in Normangee and Leon County?
Yes. We take directional boring work in Normangee, with our main office in Yukon and work staffed by our own crews or vetted partner contractor satellite yards. Trinity stays your contact from the first call through the bore log. A proposed route near FM 39 or Caney Creek helps us understand the job.
Does Benchley soil in Normangee create corrosion concerns for steel pipe?
Yes. The USDA soil survey maps high steel corrosion risk across 100 percent of Normangee, so the line owner should consider casing and tracer wire materials for a route near County Line Road. HDPE is unaffected by this soil corrosion concern. The line owner selects any coating for steel.
What ground does a bore pass through in Normangee Benchley soil?
The USDA soil survey maps Benchley soil across 41 percent of Normangee, and clay across 91 percent at about 40 inches below the surface. Average clay content there is 44 percent. Clay can hold an open hole but become sticky on the reamer, which affects a bore near FM 3.
Could a directional bore in Normangee encounter rock along the planned alignment and affect our boring approach?
Bedrock is not mapped in the top five feet as a general condition in Normangee, but the survey places it within 60 inches on 1 percent of the area. The geologic map shows the Cook Mountain Formation of Bartonian age, including clay and marly sand, so deeper material may slow a route near Caney Creek.
Who approves a Normangee bore under FM 39?
For work in FM 39 right of way, the line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews it. For a Normangee crossing beneath BNSF Railway, we provide the bore plan and profile needed for that filing. A route under FM 39 also has to account for the highway cover requirements in the permit.
What should we prepare for a Normangee bore beneath BNSF Railway when assembling the railroad filing?
A crossing beneath the 1.68 track miles of BNSF Railway inside Normangee requires an agreement with the railroad. That agreement establishes crossing conditions such as casing, depth and flagging. If the line is also on highway right of way near FM 39, TxDOT asks for a copy.
What bore sizes and lengths can Trinity handle near 2nd Street in Normangee?
We handle lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right fit for a route near 2nd Street depends on what pipe or conduit is going in, the footage and the crossings along the path.
How early should I call Texas811 for a Normangee bore near County Line Road?
Submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a County Line Road start slips more than 14 days past the original notice, make a new request. Before work continues in Normangee, we have worn or moved marks refreshed so the marked route remains clear.
What do we consider when estimating directional boring costs near FM 39 in Normangee, including route and crossing conditions?
The scope drives the price: length, pipe size, Benchley clay or rock, utility exposures, pavement, pits and creek crossings all matter. A Caney Creek route may take different planning than a short street crossing, while work under FM 39 adds highway permit and cover details. Yukon is 363 road miles away, so we account for that distance when planning mobilization for Normangee work.
Where the Normangee facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Normangee
- U.S. Census Bureau, TIGER/Line 2024: Normangee boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Normangee
- U.S. Census Bureau, American Community Survey 2019 to 2023: Normangee housing units and year built
- Macrostrat geologic map compilation: map units under Normangee
- U.S. EPA Safe Drinking Water Information System: public water systems serving Normangee
- U.S. Department of Transportation, North American Rail Network: track owners in Leon County and Madison County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Leon County and Madison County
- U.S. Geological Survey, Elevation Point Query Service: Normangee elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Normangee
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Normangee
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Normangee, Texas
Type the address of your job in Normangee. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Normangee
County: Madison County directional boring. Same county: Buffalo · Jewett · Oakwood · Midway. All counties: Texas county list.
