Spade Texas Directional Boring: Amarillo Fine Sandy Loam, FM 168 And FM 54
Quick Answer: Amarillo fine sandy loam covers much of Spade, and sandy clay loam mapped below can cling to a reamer. Along FM 168 and FM 54, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes beneath pavement. Spade is 373 road miles from our Yukon, Oklahoma main office, so a bore near Littlefield needs mobilization planned into the job. In Amarillo soil, clay at depth can grip pipe, so we manage fluid and ream in stages before pulling the line.
Spade bores at a glance
- Unincorporated community in Lamb County, Texas. Population 71 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 373 miles, about 7.1 hours of driving.
- Ground: Amarillo soil is mapped on 80 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 168 and FM 54. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: Spade Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Spade, Lamb County?
We take directional boring work in Spade, an unincorporated community in Lamb County. The Census Bureau counted 71 residents in 2020; it does not publish yearly estimates for places this small. Water, sewer, gas, electric conduit and fiber lines can be routed beneath or alongside FM 168 and FM 54, depending on the route and what the line needs to connect.
Our main office is in Yukon, Oklahoma, and Spade work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, we have focused on directional boring; that is more than four decades of working out how ground conditions affect a bore. Our family business began in 1965, and that experience helps us plan for the sandy clay loam mapped beneath Spade.

What does the soil survey show beneath Amarillo soil in Spade?
The USDA soil survey maps Amarillo soil across 80 percent of Spade, with Amarillo fine sandy loam map units covering most of the mapped area. About 40 inches down, sandy clay loam is the mapped texture across 80 percent, while the surface is fine sandy loam across 88 percent. The survey reports average clay content of 27 percent at that depth. Around Spade, we use mapped Amarillo, Zita, Olton, and Randall soil patterns as context, not as substitutes for test borings. The clay can hold an open hole but may ball on a reamer or grip pipe.
| USDA soil survey, inside the Spade mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Amarillo 80 percent, Zita 7 percent, Olton 7 percent and Randall 5 percent |
| Texture at the surface | fine sandy loam 88 percent, loam 7 percent and clay 5 percent |
| Texture about 40 inches down | sandy clay loam 80 percent, loam 7 percent and clay loam 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 95 percent and fat clay (CH) 5 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 12 percent of the area |
Mapped soil data places no bedrock within five feet of the surface in Spade, but the map cannot rule out deeper rock. Seasonal water table conditions are mapped in 5 percent of the area, so pits may need pumping if water enters. The survey identifies no flood prone soils. High steel corrosion risk is mapped across 12 percent, a concern for steel casing or tracer wire that the line owner can address through material choices. The Blackwater Draw Formation is Cenozoic; the map also shows Cenozoic sedimentary rocks of Paleocene age.
How do we bore through Spade’s sandy clay loam?
The USDA survey maps sandy clay loam below Spade’s fine sandy loam surface. That ground can stay open but stick to tooling, so we plan fluid, reaming and pipe pull around the soil.
- In Spade’s sandy clay loam, we use fluid suited to clay and ream in stages, reducing the chance that sticky soil balls on the tooling.
- The drill head is followed from the surface with a walkover locator, while depth and pitch are logged as the bore advances beneath FM 168 or FM 54.
- Before drilling near marked utilities along a Spade route, we hydrovac pothole them; locate paint shows position, not burial depth.
- With seasonal water table conditions mapped in 5 percent of Spade, we keep pits small and pump if water enters while working near FM 54.

What does a bore have to cross along FM 168 in Spade?
FM 168 and FM 54 are state highways inside Spade’s mapped community boundary. The mapped roadway lengths are 2.0 miles for FM 168 and 0.9 miles for FM 54, so a route may need to pass beneath pavement or follow a highway right of way. Public records list 5.08 miles of public road centerlines inside the community, but no named local streets. A route sketch helps us see whether a proposed service follows either farm to market road or crosses its pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 168 | State highway | 2 roadway miles inside | State highway office |
| FM 54 | State highway | 0.9 roadway miles inside | State highway office |
Public mapping shows no railroad inside Spade or within one mile outside the mapped community, so no track alignment is identified for a bore route. No mapped street and rail crossing is listed. The maps also show no streams inside or within one mile of the community, and no lakes or ponds within one mile. There is no named water crossing to plan around in the mapped area, but we still need the proposed route to identify what the job actually crosses.
Who permits a bore on Spade roads in Lamb County?
Spade has no city government, so permissions for local roads belong to the county or state, depending on the road. FM 168 and FM 54 are state highways; if work uses their right of way, the line owner, not the driller, files through TxDOT’s online RULIS system. The TxDOT Lubbock District reviews that application, and we give the owner a bore plan and profile. TxDOT cover rules vary by line type: highway crossings generally require 60 inches for electric, communication and water lines, and pressurized sewer; the right of way cover differs by line type. Highway pavement crossings are bored or tunneled, encased, and extend beneath all travel lanes on rural highways. No railroad or stream crossing is mapped in Spade.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may be buried near Spade Water Supply Corporation routes?
Spade Water Supply Corporation uses groundwater wells and reports 52 service connections serving 100 people. Near FM 168 or FM 54, we use Texas811 marks and hydrovac potholing to expose marked water or electric lines before drilling close; paint shows position, not depth. EIA records list Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative as electric service reporters in Lamb County. We confirm the actual line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Spade Water Supply Corporation | Public water system | Groundwater wells | 52 connections, 100 people served |
| Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lamb County | EIA Form 861 | Confirm the line owner by address |
Housing data is not published for Spade because the survey sample is too small to rely on. A route following FM 168 or FM 54 may involve a long service run, so we need the water system and electric line locations before choosing a bore path. Lamb County averages 18.5 inches of precipitation a year, with June averaging 2.8 inches and January 0.6 inches. If marked lines fall on the route, we pothole them before the drill approaches.

Where is Spade in relation to Littlefield?
Spade is an unincorporated community in Lamb County at an elevation of 3,516 feet, covering 1.87 square miles. Its ZIP code is 79369. Anton is 8.0 miles south; Littlefield is 10.4 miles west; Amherst is 16.1 miles west; Whitharral is 16.3 miles southwest; and Olton is 17.6 miles north. Littlefield is both the county seat and the nearest larger city. From our Yukon yard, Spade is 373 road miles away, a 7.1 hour drive that affects how we plan mobilization for work along FM 168 or FM 54.
Places near Spade
- Directional boring in Anton: 8 miles south
- Directional boring in Littlefield: 10.4 miles west
- Directional boring in Amherst: 16.1 miles west
- Directional boring in Whitharral: 16.3 miles southwest
- Directional boring in Olton: 17.6 miles north
Which jobs call for a directional bore in Spade?
- Highway crossing: A bore beneath FM 168 can carry a water or communication line without opening the highway pavement.
- Roadside utility: A route beside FM 54 can place electric conduit or fiber within the highway right of way, subject to the permit.
- Water service: A connection near Spade Water Supply Corporation may need a bore that avoids marked water lines along the route.
- Fiber route: A fiber bore between Spade and Littlefield can use a planned path that limits surface cuts across local access.
- Sewer line: A pressurized sewer crossing at FM 168 needs its own cover and casing plan under TxDOT rules.
- Electric conduit: A route near FM 54 starts with confirming the serving line owner and exposing marked utilities before drilling.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore under FM 168 in Spade?
For a Spade quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Show whether the route reaches FM 168, FM 54 or a service connection near Littlefield, so we can assess the crossings and access.
Price follows the route and scope, with the sandy clay loam first because sticky ground can call for staged reaming and careful fluid control. The number of marked utilities to expose, pipe size and bore length also matter. Concrete or pavement on FM 168 or FM 54 changes the crossing plan. Pit work, sand backfill and excavator time affect the setup, while Spade’s 373 road miles from Yukon make mobilization part of the job.
Questions people ask about boring in Spade
Does Trinity take directional boring jobs in Spade, Lamb County, and who staffs them?
Yes. We take work in Spade using our own crews or crews from satellite yards run by drilling partners we have vetted. For Spade work near FM 168, we stay involved from the first call through the bore log. Lamb County routes near FM 168 or FM 54 can be planned around the ground and crossings shown for the proposed path.
Who owns electric lines in Spade, Lamb County, and who confirms conduit specs?
Electric service reporters for Lamb County include Southwestern Public Service, Bailey County Electric Cooperative Association, Lamb County Electric Cooperative and South Plains Electric Cooperative. That list does not identify the provider at every Spade address. We confirm the line owner and conduit requirements for the particular route before planning a bore near FM 168.
Who controls streets in Spade, Lamb County, and does FM 54 have to be cut?
Spade is unincorporated and has no city government, so local road authority rests with the county or state, depending on the road. FM 54 is a state highway. A bore can pass beneath pavement rather than open cutting it, with entry and exit pits placed in the ground on either side.
What ground is under Spade, including Amarillo soil about 40 inches down?
The USDA soil survey maps Amarillo soil across 80 percent of Spade. About 40 inches down, sandy clay loam is mapped across 80 percent, with average clay content of 27 percent. That clay can hold a hole open but stick to a reamer or grip pipe, so staged reaming and fluid control matter.
Is a Spade bore likely to hit rock beneath FM 168?
Bedrock is not mapped within the top five feet in Spade, though deeper rock is not ruled out. The geologic map shows the Cenozoic Blackwater Draw Formation and Cenozoic sedimentary rocks of Paleocene age. Those maps do not replace checking conditions along a specific bore route.
Who approves a bore under FM 168 in Spade, and which TxDOT office reviews it?
For work in the FM 168 right of way, the line owner submits the utility permit application through TxDOT’s RULIS system. The TxDOT Lubbock District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner.
How early must I call Texas811 for a Spade bore in Lamb County, and what if marks move?
For a bore along FM 168, the locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Spade requests through TxDOT Lubbock District, if the start slips more than 14 days past the original notice, we submit a new request. Before work continues along FM 54 in Spade, we refresh worn or moved marks through Texas811.
How far is Spade from Yukon, and does Littlefield affect mobilization?
From our Yukon, Oklahoma main office, Spade is 373 road miles and a 7.1 hour drive, shaping our travel planning. Littlefield is 10.4 miles west of Spade. That distance affects how we plan crew and equipment mobilization for a job near FM 168 or elsewhere in the community.
What affects the price of a Spade directional bore near FM 168?
For boring in Spade’s fine sandy loam, we set pricing from the job scope, not a blanket figure. In Spade, sandy clay loam can affect drilling time and fluid needs; the bore length, line size and utilities to expose also matter. Pavement on FM 168, pit work, backfill and equipment time change the plan. Mobilization from Yukon is another job factor.
Where the Spade facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Spade
- U.S. Census Bureau, TIGER/Line 2024: Spade boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Spade population count
- Macrostrat geologic map compilation: map units under Spade
- U.S. EPA Safe Drinking Water Information System: public water systems serving Spade
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamb County
- U.S. Geological Survey, Elevation Point Query Service: Spade elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Spade
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Spade
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Spade, Texas
Type the address of your job in Spade. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Spade
Same county: Sudan · Earth · Springlake. All counties: Texas county list.
