trinityboringsolutions.com

Tow Texas Directional Boring: Luckenbach Clay Loam, Calvert Creek, RM 2241

Quick Answer: The USDA soil survey maps Luckenbach clay loam in Tow, with bedrock commonly shallow in the top five feet. Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for lines crossing Calvert Creek without opening the channel. Tow is 409 road miles from our Yukon, Oklahoma main office, with RM 2241 among the routes that shape access. Clay loam and shallow bedrock can slow reaming and call for a bore plan matched to the exact route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tow bores at a glance

  • Unincorporated community in Llano County, Texas. Population 226 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 409 miles, about 8.6 hours of driving.
  • Ground: Luckenbach soil is mapped on 10 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 20 percent of the area.
  • Highways inside the boundary: RM 2241 and RM 3014. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Calvert Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Tow near Calvert Creek?

Trinity Boring Solutions takes directional boring work in Tow, where the USDA soil survey maps Luckenbach clay loam and bedrock within five feet. The Census Bureau counted 226 people in Tow in the 2020 Census; it does not publish yearly estimates for this unincorporated place. We can place water, sewer, gas, electric conduit or fiber beneath Bragg, Morgan or RM 3014 where the route calls for it.

Our main office is in Yukon, Oklahoma, and Tow work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965 and have done directional boring since 1982; that history supports jobs from 3/4 inch service lines to 48 inch casing. For a route near Calvert Creek, the needed pipe size and bore length help determine the right setup, with bore lengths from 10 feet to 5,000 feet.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Tow ground like to bore in Luckenbach soil?

Luckenbach soil covers 10 percent of Tow on the USDA soil survey, and Luckenbach clay loam with 0 to 3 percent slopes is mapped across the same share. At about 40 inches below the surface, the survey maps bedrock in 18 percent of the area, sandy clay loam in 14 percent and clay loam in 13 percent. Average clay content at that depth is 32 percent, and 17 percent of the area is mapped as heavy clay. These are soil map patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Tow mapped community boundaryWhat is mapped
Soil series mappedLuckenbach 10 percent, Pedernales 9 percent, Nuvalde 7 percent, Nebgen 6 percent and Oplin 4 percent
Texture at the surfaceclay loam 17 percent, fine sandy loam 13 percent and very stony fine sandy loam 6 percent
Texture about 40 inches downbedrock 18 percent, sandy clay loam 14 percent and clay loam 13 percent
Engineering class about 40 inches downlean clay (CL) 28 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inches20 percent of the area (16 percent hard rock, 5 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel19 percent of the area

The USDA soil survey maps bedrock within 60 inches across 20 percent of Tow, with hard bedrock in 16 percent and weathered bedrock in 5 percent; typical depth is 22 inches. That can slow a bore or change the bit where rock is encountered. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 3 percent, including ground to account for near Calvert Creek. High steel corrosion risk is mapped in 19 percent, so the line owner should weigh casing and tracer wire materials. The geologic map names the Cambrian Hickory Sandstone Member, a reminder that deeper ground may differ.

How do we bore Tow ground with mapped bedrock?

In Tow, the Luckenbach clay loam and shallow bedrock map calls for a route specific plan, not one assumed soil condition. We track the drill head from the surface and log its depth and pitch as the bore advances.

  1. Luckenbach clay loam can cling to the reamer, so we use a thinner fluid with polymer, ream in stages and pull the pipe the same day the hole is opened.
  2. Where the Tow soil survey maps bedrock within 60 inches, we allow for slower drilling and choose a rock bit if hard bedrock is encountered.
  3. Before drilling near a marked line on Bragg or County Road 220, we hydrovac pothole each utility on the path because surface paint does not show its depth.
  4. Near Calvert Creek, we track the drill head from the surface and log depth and pitch, keeping entry and exit pits on land beside the crossing.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What could a bore cross on Bragg in Tow?

RM 2241 has 1.8 mapped roadway miles inside Tow, and RM 3014 has 0.8, so a route under either state highway needs a plan for the right of way. The longest named streets include Bragg, County Road 220 and Morgan, each with 0.56 miles in the community. Tow Trail has 0.42 miles. Boring can carry a line beneath these roads without cutting the pavement, driveway or sidewalk; the entry and exit pits sit off the crossing.

CrossingTypeMapped extentWho has a say
RM 2241State highway1.8 roadway miles insideState highway office
RM 3014State highway0.8 roadway miles insideState highway office
Calvert CreekStream0.57 channel miles insideChecked for Corps of Engineers jurisdiction
Cowan CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Fall CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Alexander BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lake BuchananLake or pond8,029 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad tracks are mapped inside Tow or within one mile outside the community boundary, so a local track crossing is not shown. Calvert Creek runs 0.57 channel miles inside the boundary, and one street crossing of a named stream is mapped. Lake Buchanan is also inside Tow. A route crossing Calvert Creek or the lake needs water crossing jurisdiction checked during planning, and the bore path must account for the channel or shoreline.

Whose permission does a Tow bore in Llano County need?

Tow has no city government, so public street authority rests with Llano County or the state, depending on the road. For work in the right of way of RM 2241 or RM 3014, the line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. At a highway crossing, cover requirements depend on the line type. A Calvert Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Tow and Llano County?

The water provider for a specific Tow address needs to be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie systems to towns in Texas, so a town name alone does not identify the provider near Calvert Creek. Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative report electric service in Llano County. The line owner for the address must be confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric CooperativeElectric utilities reporting service in Llano CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Tow’s median housing year at 1966. It estimates 28 percent of homes were built before 1960, 55 percent from 1960 to 1999 and 17 percent in 2000 or later. That mix can mean replacing an older service or adding a new one. For a proposed conduit route beneath Morgan, we expose every marked utility along the bore path with hydrovac before the drill approaches; paint shows location, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Tow near Buchanan Dam?

Tow is an unincorporated community in Llano County, at an elevation of 1,034 feet and covering 1.82 square miles. ZIP code 78672 serves the area. Buchanan Lake Village is 2.6 miles southeast, and Buchanan Dam is 5.0 miles south. Kingsland, the nearest larger place listed, is 15.3 miles south; Llano, the county seat, is 15.7 miles southwest. Tow is 409 road miles and an 8.6 hour drive from our Yukon, Oklahoma main office, which affects mobilization for work near RM 2241.

Places near Tow

Which jobs call for a bore near County Road 220 in Tow?

  • Highway crossing: A line beneath RM 2241 needs a route and depth plan for the TxDOT right of way rather than an open cut through pavement.
  • Creek crossing: A route beneath Calvert Creek can keep the channel bank uncut, with water crossing jurisdiction checked during planning.
  • Street service: Water or sewer along Morgan can pass below the street surface, with marked utilities exposed before the drill reaches them.
  • Fiber conduit: A run near Tow Trail can avoid trenching the street once the route length and conduit size are set.
  • Lake edge line: A Lake Buchanan route needs entry and exit pits placed to suit the ground beside the water.
  • Rural service: A line reached from County Road 220 can be planned around its service length, ground conditions and utility crossings.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Tow Trail in Tow?

For a Tow Trail address, give us the street address or a map pin first. Tell us what will go underground, such as water, sewer or fiber conduit near RM 2241. Include the pipe or conduit size and the footage, whether the route follows Morgan or crosses Calvert Creek. A sketch or plans help us see the entry, exit and nearby obstacles.

In Tow, ground and crossings can drive the price before length does: Luckenbach clay loam and shallow bedrock affect reaming, while a Calvert Creek crossing adds planning. Pipe or conduit size, total length and marked utilities to expose also matter. Concrete or pavement, pits, excavator time and sand backfill change the work. Access and mobilization matter too, since Tow is 409 road miles from Yukon; high profile or emergency work can add requirements.

Questions people ask about boring in Tow

Does Trinity take directional boring jobs in Tow and Llano County, and who staffs them?

Yes, Trinity Boring Solutions takes directional boring work in Tow and across Texas. Our crews handle the work, with partner contractor crews available from satellite yards we have vetted. You work with Trinity from the first call through the bore log, whether the route is near Bragg or Calvert Creek.

Is there rock in Tow, and how much is mapped in the top five feet?

The USDA soil survey maps bedrock within 60 inches across 20 percent of Tow. Hard bedrock is mapped in 16 percent and weathered bedrock in 5 percent, with typical depth at 22 inches. That affects bit choice and drilling time where the route encounters rock; the map is not a test boring.

Who approves a Tow bore beneath RM 2241, and which TxDOT office reviews it?

For a bore in the RM 2241 right of way, the utility owner applies for the permit through TxDOT’s RULIS system. The TxDOT Austin District reviews the application. We prepare the bore plan and profile for the owner’s filing, and the permit depth requirements shape the crossing design.

Can a line be bored beneath Calvert Creek in Tow?

A line can be planned beneath Calvert Creek, which runs 0.57 channel miles inside Tow. The route must account for the channel and banks, and water crossing jurisdiction is checked during planning. The exact bore plan depends on the address, line and ground along the crossing.

Who owns electric lines in Tow, Llano County, and who confirms conduit requirements?

Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative report service in Llano County, but that does not identify the owner at every Tow address. The line owner must be confirmed before conduit work is planned, including on a route near RM 3014.

Who is responsible for Tow streets such as Morgan, and does a bore cut the road?

Tow has no city government, so streets and permits fall under Llano County or the state, depending on the road. Directional boring can place a line beneath Morgan without cutting the street surface; the route still needs utility checks and suitable entry and exit pits.

Does Trinity cover Buchanan Lake Village and rural sites outside Tow?

We take work across Texas, including Tow, nearby Buchanan Lake Village and rural sites outside the mapped community boundary. Buchanan Lake Village is 2.6 miles southeast of Tow, and a route there still needs its own address, ground and crossing details for planning.

How much notice does Texas811 need for a Tow bore near Bragg, and what if marks move?

For a bore near Bragg, Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore near RM 2241 in Tow?

Tow pricing depends on the route and work involved, not a single measurement. Luckenbach clay loam, shallow bedrock, pipe or conduit size, length and utility exposures all affect the job. Pavement, pits, creek crossings and excavator time matter too, as does mobilization from Yukon for work near RM 2241.

Where the Tow facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tow

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tow, Texas

Type the address of your job in Tow. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tow

Same county: Horseshoe Bay · Sunrise Beach Village. All counties: Texas county list.