trinityboringsolutions.com

Fritch Texas Directional Boring: Dumas Loam, Texas State Highway 136, Broadway Street

Quick Answer: On Texas State Highway 136 and Broadway Street, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines that need to pass beneath pavement. Fritch is 244 road miles from our Yukon, Oklahoma main office, so we coordinate the crew and equipment for a route that may include Cornell Avenue. Dumas loam is the dominant mapped surface soil, while clay loam is common about 40 inches down and can cling to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Fritch bores at a glance

  • Incorporated city in Hutchinson County, Texas. Population 1,763 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 244 miles, about 5.1 hours of driving.
  • Ground: Dumas soil is mapped on 51 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 136. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Fritch work near Texas State Highway 136?

We take directional boring work in Fritch, Hutchinson County, where the Census Bureau Vintage 2024 estimate puts the population at 1,763. Water, sewer, gas, electric conduit and fiber can run beneath streets such as Broadway Street or connect properties along Cornell Avenue. Fritch is 244 road miles from our Yukon yard, and our crews handle work here with support from vetted partner drilling contractors.

Our main office is in Yukon, Oklahoma, and Fritch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982; the 244 road miles from our Yukon main office shape Fritch trip planning. In Fritch, we handle work from 3/4 inch service lines to 48 inch casing, including routes near Texas State Highway 136.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Dumas soil affect a bore in Fritch?

The USDA soil survey maps Dumas soil across 51 percent of Fritch, with Dallam at 32 percent, Ady at 11 percent and Tascosa at 6 percent. Dumas loam, 0 to 1 percent slopes, covers 48 percent of the mapped area. About 40 inches down, the mapped texture is clay loam across 51 percent and sandy clay loam across 43 percent, with very gravelly sandy loam across 6 percent. We treat mapped Dumas, Dallam, Ady, and Tascosa patterns as guidance, not test borings, for Fritch underground work. The clay loam can hold a hole open but may stick to the reamer and grip pipe.

USDA soil survey, inside the Fritch city limitsWhat is mapped
Soil series mappedDumas 51 percent, Dallam 32 percent, Ady 11 percent and Tascosa 6 percent
Texture at the surfaceloam 51 percent, fine sandy loam 43 percent and gravelly loam 6 percent
Texture about 40 inches downclay loam 51 percent, sandy clay loam 43 percent and very gravelly sandy loam 6 percent
Engineering class about 40 inches downlean clay (CL) 94 percent and silty clayey gravel (GC GM) 6 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet of Fritch, but that does not rule out rock deeper down. Seasonal water table and flood prone soils are not mapped in the surveyed area, so the mapped ground does not point to those common pit concerns. High steel corrosion risk is not mapped either; the line owner still selects materials for casing and tracer wire. The geologic map shows the Pliocene Ogallala Formation, with sand, silt, clay, gravel and caliche, so local conditions can change along a route.

How do we drill Fritch clay loam?

For a bore near Broadway Street, we plan around the clay loam mapped about 40 inches below Fritch. We adjust fluid and reaming to manage sticky cuttings, then track the drill head and record its depth and pitch.

  1. On Dumas loam routes, we tune drilling fluid and ream in stages so clay cuttings do not build up on the reamer.
  2. Where the mapped clay loam lies about 40 inches down, we plan to pull pipe the same day the hole is opened.
  3. Near Broadway Street pavement, we control fluid pressure to limit the chance of pressure lifting the surface.
  4. For a route along Cornell Avenue, we hydrovac expose each marked utility before drilling near it, then track and log the bore.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a line go under Broadway Street in Fritch?

Texas State Highway 136 runs 2.3 mapped roadway miles inside Fritch, and there are no other highways mapped within 1.5 miles outside the city limits. Broadway Street is the longest named street at 2.04 miles, followed by Cornell Avenue at 1.26 miles and Plains Drive at 1.24 miles. Ridgeland Avenue covers 1.18 miles. A route under one of these streets can avoid cutting pavement, but its exact path and nearby utilities determine where the entry and exit pits fit.

CrossingTypeMapped extentWho has a say
Texas State Highway 136State highway2.3 roadway miles insideState highway office
Lake MeredithLake or pond5,597 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Fritch or within 1 mile outside the limits, and no street and rail crossing is mapped in the city. No streams or named stream crossings are mapped in the city or within 1 mile outside it. Lake Meredith, a 5,597 acre lake, lies within 1 mile but outside Fritch. If a proposed route reaches the lake, its crossing needs a jurisdiction check during planning; a street bore within town instead focuses on pavement, soil and buried lines.

Who approves a Fritch bore under Texas State Highway 136?

For a line crossing Texas State Highway 136, cover depth sets how far below the crossed grade the bore must run: electric and communication lines need 60 inches, and water lines also need 60 inches. Pressurized sewer lines need 60 inches at a crossing. The utility owner applies for a right of way permit through TxDOT’s online RULIS system, and the TxDOT Amarillo District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. The city governs its own streets, including Broadway Street. No local railroad or stream crossing is mapped; a planned Lake Meredith crossing would be checked for federal jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Fritch, Hutchinson County?

The water provider for the specific address in Fritch has to be confirmed with the city, Hutchinson County or the local water district before a bore is planned. For electric service in Hutchinson County, Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric Cooperative report service to the Energy Information Administration. Those reports do not identify the provider at every address, so we confirm the line owner before planning conduit along a street such as Cornell Avenue.

Line ownerWhat it isSourceSize
Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric CooperativeElectric utilities reporting service in Hutchinson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Fritch’s median housing year at 1972; 28 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 3 percent in 2000 or later. That mix can mean a job is replacing older service or extending a newer connection. Before a bore near Ridgeland Avenue, every marked utility on the route is exposed by hydrovac potholing; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where does Trinity work around Fritch and Lake Meredith Estates?

Fritch is an incorporated city in Hutchinson County, at an elevation of 3,190 feet and with 1.62 square miles of land. Its ZIP code is 79036. Lake Meredith Estates is 1.5 miles north, Sanford is 5.5 miles northeast and Borger is 11.0 miles east. Stinnett, the county seat, is 15.1 miles northeast. Our Yukon yard is 244 road miles away, a 5.1 hour drive. We take work in Fritch, Lake Meredith Estates and rural sites beyond the limits, with crews and vetted partner contractors supporting jobs from the Yukon office.

Places near Fritch

What boring work comes up near Fritch’s Cornell Avenue?

  • Highway crossing: A line under Texas State Highway 136 needs a planned bore profile, permit coordination and the required cover below the highway grade.
  • Water service: A service reaching a property from Broadway Street can pass beneath pavement, with the address specific water provider confirmed first.
  • Fiber conduit: A conduit route along Cornell Avenue can use a bore to avoid opening a pavement corridor.
  • Electric conduit: Near Plains Drive, we confirm the line owner and expose marked utilities before drilling close to the proposed route.
  • Street connection: A service route near Ridgeland Avenue can be laid out to keep entry and exit pits in workable ground.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Fritch bore near Ridgeland Avenue?

For a Ridgeland Avenue quote, share the job address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route and pits. If the line approaches Texas State Highway 136, include that crossing in the route details so we can account for the permit plan.

The route through Fritch’s clay loam is the first thing we study because sticky cuttings can affect reaming and pipe pullback. Pipe size, total length and the number of marked utilities to expose also shape the work. A crossing under Texas State Highway 136 adds permit planning and required cover depth. Pavement, pit space, excavator time, sand backfill and any drainage crossing matter too. Fritch is 244 road miles from Yukon, so mobilization is part of the job scope.

Questions people ask about boring in Fritch

Does Trinity take directional boring jobs in Fritch, Hutchinson County, and how are crews assigned?

Yes. We take directional boring jobs in Fritch, Hutchinson County, and keep the job with Trinity from the first call through the bore log. Our own crews and vetted partner drilling contractors support the work from our Yukon office and satellite yards. We can discuss a route along Broadway Street or elsewhere in town.

What ground should I expect for a Fritch bore through Dumas soil?

The USDA soil survey maps Dumas soil across 51 percent of Fritch. About 40 inches below the surface, clay loam is mapped across 51 percent and sandy clay loam across 43 percent. Clay loam can hold an open hole, but sticky cuttings can collect on the reamer, so the drilling plan may need staged reaming.

Could a directional bore in Fritch hit rock along Texas State Highway 136, where we plan crossing depth around subsurface conditions?

We have no bedrock mapped in Fritch’s top five feet; the loam surface does not rule out deeper rock. The geologic map identifies the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and caliche. A route near Texas State Highway 136 still needs site specific planning because mapped geology is not a test of the exact bore path.

Who approves a Fritch bore under Texas State Highway 136?

The utility that owns the line submits the right of way permit application through TxDOT’s RULIS system. The TxDOT Amarillo District reviews the application. We provide the bore plan and profile for the owner and work under its permit. A crossing beneath Texas State Highway 136 also has specified minimum cover depths.

Who owns the electric lines in Fritch, Hutchinson County, and who confirms conduit specs?

Southwestern Public Service, North Plains Electric Cooperative and Rita Blanca Electric Cooperative report electric service in Hutchinson County, but that does not establish the provider at every Fritch address. We confirm the line owner for the specific route, such as one near Cornell Avenue, before planning a conduit bore. The owner confirms its conduit requirements.

Who controls streets in Fritch, and can a bore avoid cutting Plains Drive?

Fritch is incorporated, so its streets, including Plains Drive, belong to the city. Directional boring can pass beneath pavement without opening a trench through the street. The route still needs to fit the available space for pits and account for marked utilities. We check those conditions before setting the bore path.

Does Trinity cover Lake Meredith Estates and rural sites outside Fritch?

Yes. We take work around Fritch, including Lake Meredith Estates, 1.5 miles north, and rural sites outside the city limits. Our Yukon office coordinates the work with our crews and vetted partner drilling contractors. The location and route help us plan crew travel and equipment for the job.

How early should I request locates for a Fritch bore along Broadway Street?

The excavator or contractor requests locates through Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes that timing as at least two working days. If marks wear off or move along Broadway Street, request refreshed marks before work continues.

What affects the cost of directional boring in Fritch under Texas State Highway 136?

The scope drives the price, with the soil, line size and length, utility exposures and crossing conditions all affecting the job. A Texas State Highway 136 crossing adds permit planning and cover depth requirements. Clay loam can change reaming needs, and pavement, pits, backfill, drainage crossings and mobilization from Yukon also factor into the estimate.

Where the Fritch facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Fritch

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Fritch, Texas

Type the address of your job in Fritch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Fritch

All counties: Texas county list.