trinityboringsolutions.com

Freeport Texas Directional Boring: Surfside Clay, Brazos River And Union Pacific

Quick Answer: City of Freeport water lines and electric lines reported by CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative call for ownership checks before a conduit bore under Texas State Highway 332. We take directional boring, also called horizontal directional drilling (HDD), work in Freeport for crossings such as the Brazos River. Levee Road is 520 road miles from our Yukon, Oklahoma main office, so distance affects mobilization. The USDA soil survey maps Surfside clay under 24 percent of the city, where sticky ground can grip pipe during a bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Freeport bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 10,635 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 520 miles, about 10.2 hours of driving.
  • Ground: Surfside soil is mapped on 24 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 332, Texas State Highway 288 Business, FM 1495, FM 523 and Texas State Highway 36. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 25 mapped street and rail crossings.
  • Named streams inside the boundary: Brazos River, Jones Creek and Oyster Creek.
  • Public water: City of Freeport, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Freeport’s Levee Road?

Trinity Boring Solutions takes directional boring work in Freeport, Brazoria County, where the Census Bureau Vintage 2024 estimate puts the population at 10,635. We install water, sewer, gas, electric conduit and fiber lines, including service runs along Levee Road or connections crossing Texas State Highway 332. The line owner matters before a bore, especially where existing water or electric service shares the route.

Our main office is in Yukon, Oklahoma, and Freeport work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Freeport’s City of Freeport water lines and reported electric service make our record of no utility strike in over 25 years relevant to planning each crossing. Our family business started in 1965, and we have done directional boring since 1982 for work in Freeport and Brazoria County.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Freeport’s Surfside soil affect a bore?

The USDA soil survey maps Surfside soil across 24 percent of Freeport, and Velasco clay across 17 percent. Surfside clay is occasionally flooded, while Velasco clay is frequently flooded. At about 40 inches below the surface, the survey maps clay across 65 percent of the area and CH clay across 64 percent. For Freeport work, we treat mapped soil patterns as planning information, not test borings, before setting a boring approach. The clay can hold an open hole but stick to the reamer, so the drilling plan needs to account for swelling and pipe drag.

USDA soil survey, inside the Freeport city limitsWhat is mapped
Soil series mappedSurfside 24 percent, Velasco 17 percent, Pledger 8 percent, Ijam 7 percent and Veston 6 percent
Texture at the surfaceclay 56 percent, loam 13 percent and silty clay loam 5 percent
Texture about 40 inches downclay 65 percent, stratified loam 6 percent and silt loam 5 percent
Engineering class about 40 inches downfat clay (CH) 64 percent and lean clay (CL) 18 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches66 percent of the area
Flood prone soils59 percent of the area
High corrosion risk for uncoated steel61 percent of the area

In Freeport, we do not see bedrock mapped in the top five feet, though deeper rock remains possible when planning bore depth. The USDA soil survey maps a seasonal water table within 60 inches across 66 percent of the area and flood prone soils across 59 percent, so pits and channel depth need attention near Oyster Creek and the Brazos River. Across Freeport, high steel corrosion risk is mapped across 61 percent, so we account for corrosion exposure when planning underground work. The geologic map shows Holocene freshwater, brackish, and saline marsh silt and clay, with local sand layers that can change drilling conditions.

How do we drill Freeport’s clay?

Freeport’s mapped Surfside and Velasco clays can stay open, then cling to the reamer or pipe. We adjust fluid and reaming around that behavior, with the Brazos River and wet ground also shaping the bore plan.

  1. In Surfside and Velasco clay, we use thinner drilling fluid with polymer and ream in stages to reduce sticky buildup on the tool.
  2. With Freeport’s heavy clay, we watch fluid returns closely; pressure needs control beneath pavement on Levee Road.
  3. Where seasonal water can fill pits near Oyster Creek, we keep pits small and plan pumping before the bore starts.
  4. For a Brazos River route, we plan depth below the channel and check water jurisdiction during crossing planning.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where does a Freeport line go under Texas State Highway 332?

Texas State Highway 332 runs 5.9 mapped roadway miles inside Freeport, alongside Texas State Highway 288 Business at 6.0 miles and FM 1495 at 4.0 miles. A crossing under Texas State Highway 332 needs a bore plan that fits the road right of way. Levee Road is the city’s longest named street at 7.26 miles. Brazosport Boulevard covers 5.74 miles, and 2nd Street covers 2.9 miles, giving local routes where service lines may need to pass beneath paved streets.

CrossingTypeMapped extentWho has a say
Texas State Highway 332State highway5.9 roadway miles insideState highway office
Texas State Highway 288 BusinessState highway6 roadway miles insideState highway office
FM 1495State highway4 roadway miles insideState highway office
FM 523State highway3 roadway miles insideState highway office
Texas State Highway 36State highway2.9 roadway miles insideState highway office
Texas State Highway 288State highway0.6 roadway miles insideState highway office
Union PacificRailroad11.83 track miles insideThe railroad
private or unidentified trackRailroad nearby0.8 miles outsideThe railroad
Brazos RiverStream7.89 channel miles insideChecked for Corps of Engineers jurisdiction
Jones CreekStream0.27 channel miles insideChecked for Corps of Engineers jurisdiction
Oyster CreekStream0.17 channel miles insideChecked for Corps of Engineers jurisdiction
Bryan LakeStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Flag LakeStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Flag Lake DitchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 11.83 track miles inside Freeport, and public records map 25 street and rail crossings in the city. A rail bore needs an agreement with the railroad that owns the track, with casing, depth and flagging set by that agreement. The Brazos River runs 7.89 channel miles in the city; Jones Creek and Oyster Creek are also mapped streams. Public records show 2 street crossings of named streams, so a water crossing needs jurisdiction checked during planning.

Who has to sign off on a Freeport bore in Brazoria County?

Freeport is incorporated, so its city streets, including Levee Road and 2nd Street, belong to the city itself. For work in the right of way of Texas State Highway 332 or another state route, the line owner files the utility permit in TxDOT’s online RULIS system; Trinity prepares the bore plan and profile for that filing. TxDOT’s Houston District reviews it. Cover depends on the line and route: electric and communication lines need 60 inches at crossings, water needs 60 inches, and pressurized sewer needs 60 inches. Union Pacific track crossings need an agreement with the railroad, while a Brazos River crossing is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground in Freeport and the City of Freeport?

The City of Freeport public water system uses purchased surface water and serves 10,594 people through 4,118 service connections. For a water service bore near 2nd Street, that system’s existing lines matter to the route. In Brazoria County, CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report electric service, which we account for when planning crossings. We confirm which owner has the line at the address before planning an electric conduit bore, rather than assuming one provider covers every Freeport property.

Line ownerWhat it isSourceSize
City of FreeportPublic water systemSurface water bought from another system4,118 connections, 10,594 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Freeport’s median housing year at 1973; 35 percent of housing was built before 1960, and 12 percent in 2000 or later. A replacement bore near Brazosport Boulevard may have to pass older buried services as well as newer connections. Before drilling near a marked utility, we use hydrovac potholing to expose it: paint shows the route, not the depth, and older streets can have lines below the surface.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What places are near Freeport and Lake Jackson?

Freeport covers 15.4 square miles in Brazoria County and uses ZIP code 77541. Oyster Creek is 4.1 miles northeast, Surfside Beach is 4.4 miles east, and Clute is 6.2 miles northwest. Lake Jackson, the nearest larger city, is 9.4 miles northwest; Angleton, the county seat, is 16.4 miles north. The Yukon, Oklahoma main office is 520 road miles away, a 10.2 hour drive. That distance is part of mobilization planning for work along the Brazos River or Texas State Highway 332.

Places near Freeport

What boring work comes up along Freeport’s Brazosport Boulevard?

  • Highway crossing: A line under Texas State Highway 332 is bored beneath the paved route, with the line owner’s TxDOT permit supporting the work.
  • Water service: A connection near 2nd Street needs a route checked against existing City of Freeport water lines before drilling.
  • Fiber route: A fiber bore along Brazosport Boulevard can avoid cutting the pavement by placing pits in the dirt beside the route.
  • River crossing: A Brazos River bore needs a planned channel depth and a jurisdiction check before the crossing is laid out.
  • Rail crossing: A route beneath Union Pacific track needs an agreement from the railroad that sets casing, depth and flagging.
  • Drainage crossing: Near Oyster Creek, wet ground and channel depth shape the bore route and pit plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Freeport bore near the Brazos River?

A map pin matters near the Brazos River because the exact bank and approach affect the crossing plan. For a route near Levee Road or Texas State Highway 332, send the address or pin, what goes in the ground, pipe or conduit size and footage. A sketch or plans help us see the route and likely crossings before we scope the work.

The 520 road miles from Yukon affect mobilization for a Freeport job. Price also reflects bore length, pipe or conduit size, and ground conditions such as Surfside clay that can cling to the reamer. Crossings of Texas State Highway 332 or Union Pacific track can add planning and approval needs. We also account for utilities to expose, pavement, Brazos River or drainage crossings, pits, excavator time, sand backfill, and urgent or high profile work.

Questions people ask about boring in Freeport

Does Trinity Boring Solutions take directional boring jobs in Brazoria County, including Freeport?

Yes. We take directional boring work in Freeport and staff it with our own crews or from satellite yards operated by partner drilling contractors we have vetted. For Freeport inquiries, we keep your contact with Trinity consistent from the first call through the bore log, regardless of which crew is on site. A route near Levee Road still needs its own scope and utility checks.

Can a line be bored under the Brazos River in Freeport?

A bore under the Brazos River can be planned, but the route and channel depth have to be worked out for that crossing. The river runs 7.89 channel miles inside Freeport. During planning, we check whether the crossing is under U.S. Army Corps of Engineers jurisdiction and account for the ground and access at each approach.

Who runs Freeport’s public water system, and where does its water come from for our underground work planning?

The City of Freeport owns and runs the public water system, which uses purchased surface water. The system serves 10,594 people through 4,118 service connections, figures we consider when planning underground work in Freeport. Those existing lines matter when planning a nearby bore on 2nd Street, so the route needs to be checked before the drill approaches them.

Which electric provider should I check with for a Freeport bore in Brazoria County?

In Brazoria County, CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative report electric service, which we account for when planning crossings. The line owner at a particular Freeport address must be confirmed before planning a conduit bore. That check matters on a route near Texas State Highway 332, where the line owner also handles the state utility permit application.

Does Freeport control 2nd Street, and can a bore avoid cutting it?

Freeport is an incorporated city, so its city streets belong to the city itself. A directional bore can place a line beneath 2nd Street without cutting the paved route, using work pits in the dirt on each side. The actual method depends on the line route, access and buried utilities.

What does Freeport housing along Brazosport Boulevard tell us about replacement bores?

Freeport’s median housing year is 1973, according to the American Community Survey 2019 to 2023 five year estimates. With 35 percent of homes built before 1960, replacement work near Brazosport Boulevard may encounter older buried services. We expose marked utilities with hydrovac potholing before drilling near them, since locate paint does not show depth.

Can I reach Trinity after hours about an urgent Freeport bore on 2nd Street?

Yes. For Freeport callers, a person answers Trinity’s phone 24 hours a day at (405) 409-7423, keeping project questions connected to a live response. For an urgent bore near 2nd Street, the route, utility crossings and access still determine the response needed. Freeport is 520 road miles from the Yukon main office, so mobilization is part of the job plan.

How early should I request Texas811 marks for a Freeport bore on Levee Road?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a Levee Road job slips more than 14 days past the notice, submit a new request. If marks are worn or moved in Freeport, we refresh them through Texas811 before work continues.

What affects the cost of a Freeport bore under Texas State Highway 332?

The job scope sets the price, including length, pipe or conduit size, soil, crossings and access. Texas State Highway 332 work can involve pavement and permit planning; Surfside clay can affect reaming, and Union Pacific track adds a separate crossing agreement. The 520 road miles from Yukon also affect mobilization, along with pits, utility exposure and emergency timing.

Where the Freeport facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Freeport

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Freeport, Texas

Type the address of your job in Freeport. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Freeport

Same county: Pearland · Alvin · Angleton · Manvel · Iowa Colony · Richwood · West Columbia · Sweeny · Brazoria · Wild Peach Village · Danbury · Brookside Village. All counties: Texas county list.