trinityboringsolutions.com

Quitaque Texas Directional Boring: Bukreek Loam, Texas State Highway 86, Kent Creek

Quick Answer: Main Street, Geisler and 4th shape local street work; near Texas State Highway 86, Trinity provides directional boring, also called horizontal directional drilling (HDD), in Quitaque, Texas. Quitaque has 11.84 public road miles, and our Yukon yard is 274 road miles away. USDA maps Bukreek across 56 percent of the city, with loam at the surface and sandy clay loam about 40 inches down. Bukreek’s clay rich ground can cling to a reamer, so we plan staged passes and manage drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Quitaque bores at a glance

  • Incorporated city in Briscoe County, Texas. Population 358 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 274 miles, about 5.5 hours of driving.
  • Ground: Bukreek soil is mapped on 56 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 86 and FM 1065. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Quitaque, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Texas State Highway 86 in Quitaque?

Main Street, Geisler and 4th are the longest named streets, and the city has 11.84 public road miles. The Census Bureau Vintage 2024 estimate puts Quitaque’s population at 358 in Briscoe County. Along those streets and Texas State Highway 86, we install water, sewer, gas, electric conduit and fiber lines by directional boring when the route suits the job.

Our main office is in Yukon, Oklahoma, and Quitaque work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. By comparison, a typical Quitaque plan may be a shorter service or utility crossing along Main Street, shaped by the route, line size and ground.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Quitaque and Bukreek soil?

The USDA soil survey maps Bukreek across 56 percent of Quitaque and Berda across 25 percent, with Paloduro also present. Loam makes up 97 percent of the mapped surface texture. At about 40 inches below the surface, the survey maps sandy clay loam across 62 percent of the area and clay loam across 37 percent; the mapped soil is mostly classified as CL. We use the mapped Bukreek, Berda, and Paloduro patterns as planning references, not as test borings for Quitaque installations. For a bore through Bukreek, the clay content can make cuttings sticky and cause material to cling to the reamer.

USDA soil survey, inside the Quitaque city limitsWhat is mapped
Soil series mappedBukreek 56 percent, Berda 25 percent and Paloduro 16 percent
Texture at the surfaceloam 97 percent
Texture about 40 inches downsandy clay loam 62 percent and clay loam 37 percent
Engineering class about 40 inches downlean clay (CL) 98 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel1 percent of the area

The mapped soil profile reaches 60 inches without a bedrock entry, which helps set expectations for a Bukreek bore but cannot describe deeper rock. Seasonal water table conditions are mapped in 1 percent of the area within 40 inches, while flood prone soils are not mapped. High steel corrosion risk is mapped in 1 percent, so the line owner should consider casing and tracer wire materials. We treat the Briscoe County map’s Lingos Formation of Cenozoic age and Late Permian sedimentary rock of Wuchiapingian age as geology context, not a bore log.

How is a bore run through Quitaque’s sandy clay loam?

Quitaque’s Bukreek soils and sandy clay loam below the surface call for controlled fluid and staged reaming. We set the path from the site conditions, then track the drill head as the bore advances.

  1. Bukreek clay can stick to the reamer, so we use staged passes and fluid suited to the ground before pulling pipe through the open bore.
  2. At a Main Street route, we hydrovac pothole every marked utility before drilling nearby because paint shows position, not burial depth.
  3. For sandy clay loam mapped about 40 inches down, we watch returns and pressure so drilling fluid does not disturb pavement near 4th.
  4. On a Texas State Highway 86 route, a walkover locator follows the drill head while we log its depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Quitaque near Kent Creek?

Texas State Highway 86 runs for 1.3 mapped roadway miles inside Quitaque, and FM 1065 adds 0.7 miles. No highway is mapped within 1.5 miles outside the city limits. Main Street is the longest named street at 1.29 miles, followed by Geisler at 0.7 miles and 4th at 0.67 miles. A bore beneath those paved routes can keep the road surface intact, but the path and work area still need to fit the specific street and utility crossing.

CrossingTypeMapped extentWho has a say
Texas State Highway 86State highway1.3 roadway miles insideState highway office
FM 1065State highway0.7 roadway miles insideState highway office
Kent CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Quitaque or within one mile outside it, so the local maps show no track crossing to plan around. Kent Creek lies 0.1 miles from the city limits, while no named stream crosses the city. No mapped street crossing of a named stream is shown inside Quitaque, and no lake or pond is mapped within one mile. A proposed creek route still needs review for U.S. Army Corps of Engineers jurisdiction during planning.

For a bore under Texas State Highway 86 in Quitaque, which office handles approval through TxDOT Childress District?

Texas State Highway 86 is a state highway, so a utility bore in its right of way needs a TxDOT utility permit reviewed by the Childress District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules require lines beneath an existing highway to be bored or tunneled, and rural highway crossings must extend beneath all travel lanes. We coordinate crossings on Main Street and Geisler as Quitaque city street work, not state highway work. No railroad is mapped locally, while any Kent Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Quitaque and Briscoe County?

The City of Quitaque public water system uses groundwater wells and has 236 service connections serving 342 people. For electric service, AEP Texas North, Southwestern Public Service and Lighthouse Electric Cooperative report service in Briscoe County; that does not identify the provider for every Quitaque address. Before laying electric conduit along Main Street or another route, we establish which utility owns the line so the bore plan fits the actual service.

Line ownerWhat it isSourceSize
City of QuitaquePublic water systemGroundwater wells236 connections, 342 people served
AEP Texas North, Southwestern Public Service and Lighthouse Electric CooperativeElectric utilities reporting service in Briscoe CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Quitaque’s 1967 median housing year from the American Community Survey 2019 to 2023 five year estimates as context, not a utility map. The survey estimates 37 percent of housing was built before 1960, 52 percent from 1960 to 1999 and 11 percent in 2000 or later. A replacement bore along Geisler may have to pass existing service lines, while a new service has a different route. We hydrovac pothole marked utilities before drilling near them because surface marks do not show their depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Quitaque in relation to Turkey?

Quitaque is an incorporated city in Briscoe County, at an elevation of 2,576 feet and with 0.72 square miles of land. Its ZIP code is 79255. Turkey is 9.3 miles east, and Silverton, the county seat, is 15.9 miles northwest. Plainview is the nearest larger city listed, 40.0 miles west. From our Yukon, Oklahoma yard, Quitaque is 274 road miles away, or a drive of 5.5 hours; that distance is part of planning a project along Texas State Highway 86.

Places near Quitaque

What kinds of bores come up along Geisler in Quitaque?

  • Highway crossing: A route beneath Texas State Highway 86 is bored or tunneled, with the rural crossing extending beneath all travel lanes.
  • Water service: A connection from the City of Quitaque groundwater system can be planned along Main Street after existing lines are exposed.
  • Fiber conduit: A Geisler route can carry conduit below the street surface, with marked utilities pothole exposed before drilling.
  • Creek crossing: A proposed route near Kent Creek needs a planned profile and a check for federal jurisdiction.
  • Sewer replacement: A bore along 4th can place a new line while keeping the street surface uncut.
  • Electric conduit: For a route near FM 1065, the electric line owner is identified before conduit size and bore path are set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Quitaque bore near Main Street?

For a Main Street project, send the address or a map pin first, then tell us what will go underground, such as a water line or fiber conduit. Include the pipe or conduit size and the expected footage. A sketch or plans showing the route toward Texas State Highway 86 help us understand the crossing and work area.

The scope sets the price, with ground and crossings high on the list for Quitaque. Bukreek clay can change reaming and fluid needs, while a Texas State Highway 86 crossing brings permit and roadway conditions into the plan. Length, pipe size, pavement, exposed utilities, pits and excavator time also matter. Creek or drainage crossings add planning needs, and mobilization reflects the 274 road miles from Yukon. High profile or emergency work can change the required scope as well.

Questions people ask about boring in Quitaque

Does Trinity Boring Solutions take directional boring jobs in Quitaque and Briscoe County?

Yes. We take directional boring work in Texas, including Quitaque in Briscoe County. Our Yukon office coordinates the job from the first call through the bore log, whether our own crew or a vetted partner contractor is at the site. A route near Texas State Highway 86 can be discussed with the line type and proposed path.

How does Quitaque’s older housing near Geisler affect a replacement bore?

Quitaque’s median housing year is 1967, and the American Community Survey 2019 to 2023 estimates 37 percent of homes were built before 1960. A replacement route along Geisler may encounter existing service lines, so we pothole marked utilities before drilling near them. A new service can follow a different alignment than a replacement.

What ground does a bore through Bukreek soil in Quitaque encounter?

The USDA soil survey maps Bukreek across 56 percent of Quitaque, with loam at the surface. At about 40 inches down, sandy clay loam is mapped across 62 percent of the area. Clay can cling to a reamer, so a bore near Main Street may need staged reaming and managed fluid returns.

Will our bore near Kent Creek in Quitaque encounter rock beneath the mapped loam?

The mapped soil profile does not show bedrock within 60 inches, but that does not establish conditions farther down. Quitaque’s geologic map includes the Cenozoic Lingos Formation and Late Permian sedimentary rock of Wuchiapingian age. A planned bore near Texas State Highway 86 still depends on its actual depth and route.

For a bore under Texas State Highway 86 in Quitaque, which office handles approval through TxDOT Childress District?

TxDOT reviews a utility permit for work in the Texas State Highway 86 right of way through its Childress District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for that filing. The permit sets the approved crossing conditions for the specific route.

Can a line be bored beneath Kent Creek near Quitaque?

A creek crossing can be considered, but Kent Creek is 0.1 miles outside Quitaque’s city limits, so the route needs a site specific review. During planning, the proposed crossing is checked for U.S. Army Corps of Engineers jurisdiction. The creek profile and access determine how the bore is laid out.

Can I reach Trinity after hours about an urgent bore near 4th in Quitaque?

Yes. A person answers our phone at (405) 409-7423 24 hours a day for an urgent request involving a route near 4th or elsewhere in Quitaque. Tell us what line is involved and where the work is needed so we can understand the situation and discuss the next step.

How early should I call Texas811 for a bore along Main Street in Quitaque?

For a planned start near Main Street, make the Texas811 request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. If our Quitaque start moves more than 14 days past the original notice, we submit a new request before traveling 274 road miles from Yukon. Before continuing near Baird Drive, we refresh any worn or moved marks and verify the bore path.

What affects the cost of directional boring under Texas State Highway 86 in Quitaque?

The price depends on the scope, not a standard rate. Bukreek soil, bore length and pipe size affect the drilling plan; a Texas State Highway 86 crossing can add permit and pavement considerations. Exposed utilities, pits, excavator time, creek or drainage crossings and mobilization from Yukon also shape the work.

Where the Quitaque facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Quitaque

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Quitaque, Texas

Type the address of your job in Quitaque. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Quitaque

All counties: Texas county list.