Hallsville Texas Directional Boring: Sacul Soil, US 80 and Wards Creek
Quick Answer: Can a line pass beneath US 80, Union Pacific track or Wards Creek without cutting the surface? We handle directional boring, also called horizontal directional drilling (HDD), in Hallsville for routes like these. Hallsville is 355 road miles from our Yukon, Oklahoma main office, with Main Street among the local streets to plan around. The USDA soil survey maps heavy clay at about 40 inches, so sticky cuttings and fluid pressure need attention near pavement.
Hallsville bores at a glance
- Incorporated city in Harrison County, Texas. Population 4,896 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 355 miles, about 6.8 hours of driving.
- Ground: Sacul soil is mapped on 29 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 24 percent of the area.
- Highways inside the boundary: US 80 and FM 450. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
- Named streams inside the boundary: Wards Creek.
- Public water: City of Hallsville, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Union Pacific in Hallsville?
Can a line pass under a Hallsville road or track without cutting it? We take directional boring work across Texas, including Hallsville in Harrison County. The Census Bureau Vintage 2024 estimate puts the city at 4,896 people. We can place water, sewer, gas, electric conduit or fiber beneath Central Street, US 80 or the Union Pacific track, with the route planned for the actual crossing.
Our main office is in Yukon, Oklahoma, and Hallsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have shaped how we plan for Hallsville’s mapped clay and sandy surface soils. We work through the bore log with you, whether our own crew or a vetted partner crew is on the site.

How does Hallsville’s Sacul soil affect a bore?
The USDA soil survey maps Sacul very fine sandy loam across 29 percent of Hallsville, with Bowie fine sandy loam at 19 percent and Cuthbert fine sandy loam at 18 percent. At about 40 inches below the surface, the survey maps clay across 68 percent of the area and sandy clay loam across 21 percent. For Hallsville bores, we account for the average clay content at that depth, which is 39 percent. These are mapped soil patterns, not test borings, so a route near Main Street still needs site specific planning.
| USDA soil survey, inside the Hallsville city limits | What is mapped |
|---|---|
| Soil series mapped | Sacul 29 percent, Bowie 19 percent, Cuthbert 18 percent, Sawyer 15 percent and Iulus 11 percent |
| Texture at the surface | fine sandy loam 50 percent and very fine sandy loam 50 percent |
| Texture about 40 inches down | clay 68 percent, sandy clay loam 21 percent and fine sandy loam 11 percent |
| Engineering class about 40 inches down | fat clay (CH) 50 percent, lean clay (CL) 19 percent and silt (ML) 18 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 24 percent of the area (0 percent hard rock, 24 percent weathered rock) |
| Seasonal water table within 60 inches | 76 percent of the area |
| Flood prone soils | 11 percent of the area |
| High corrosion risk for uncoated steel | 81 percent of the area |
The survey maps bedrock within 60 inches across 24 percent of Hallsville, with a typical depth of 40 inches, so a bore may meet weathered rock in some locations. A seasonal water table is mapped within 60 inches across 76 percent, and flood prone soils cover 11 percent, making Wards Creek and nearby pits worth checking for water. For Hallsville bores, we account for high steel corrosion risk mapped across 81 percent when planning underground steel. The Queen City Sand, an Eocene unit of sand and clay, fits the changing ground; the line owner chooses any steel coating.
How do crews handle Hallsville clay along its streets?
Hallsville’s soil survey shows clay below a fine sandy loam surface. We adjust the drilling fluid and reaming to the ground, and use the route and nearby features such as Wards Creek to plan the bore.
- Sacul soil has a sandy loam surface over mapped clay, so we use a thinner fluid mix and ream in stages to limit sticky buildup on the tools.
- Where Hallsville’s clay is heavy, we watch returns and keep fluid pressure in check near pavement on US 80 or Main Street.
- With seasonal water mapped within 60 inches across 76 percent of the city, we keep pits small and pump water where conditions require it.
- Before a drill approaches marked lines near the City of Hallsville water system or an electric route, we hydrovac expose them and track depth and pitch.

Can a Hallsville bore cross Wards Creek?
US 80 and FM 450 run inside Hallsville, while Interstate 20 lies 0.4 miles beyond the city limits. A route beneath existing highway pavement calls for boring or tunneling rather than cutting across it. Main Street runs 1.56 miles within the city, Cypress Street 1.51 miles and Central Street 1.45 miles. Those streets give a route planner real options for reaching a property without opening the road, depending on the utility path and available space.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 80 | US highway | 2.2 roadway miles inside | State highway office |
| FM 450 | State highway | 2.3 roadway miles inside | State highway office |
| Interstate 20 | Highway nearby | 0.4 miles outside | State highway office |
| Union Pacific | Railroad | 2.78 track miles inside | The railroad |
| Wards Creek | Stream | 1.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rodgers Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Sewell Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Hardin Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Hatley Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
The Union Pacific Little Rock Subdivision accounts for 2.78 track miles in Hallsville, and public mapping shows 7 street and rail crossings in the city. A track crossing needs an agreement from Union Pacific that sets crossing conditions. Wards Creek runs 1.63 channel miles in the city, with 1 mapped street crossing of a named stream. A creek route is checked for federal waterway jurisdiction during planning; no lakes or ponds are mapped within 1 mile.
Do I need a permit for a Hallsville bore in Harrison County?
Hallsville’s city streets are under the city’s jurisdiction, while a route using US 80, FM 450 or Interstate 20 right of way needs a TxDOT utility permit. The TxDOT Atlanta District reviews the state highway application. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; for a Hallsville crossing, we prepare the bore plan and profile for the owner’s filing. Cover requirements depend on the line: highway crossings call for 60 inches for electric or communication, 60 inches for water and 60 inches for pressurized sewer. The permit can set another depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near the City of Hallsville water system?
The City of Hallsville public water system uses purchased surface water and reports 1,850 service connections serving 5,580 people. That system is an important reference when planning a water service bore near Central Street or another city route. Southwestern Electric Power, Panola Harrison Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Harrison County. The electric line owner for a particular Hallsville address must be confirmed before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Hallsville | Public water system | Surface water bought from another system | 1,850 connections, 5,580 people served |
| Southwestern Electric Power, Panola-Harrison Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Harrison County | EIA Form 861 | Confirm the line owner by address |
Hallsville’s median housing year is 1993, a profile we consider when planning underground routes through the town. In Hallsville, we account for a housing profile of 24 percent before 1960, 42 percent from 1960 to 1999 and 34 percent in 2000 or later when planning underground work. That mix can mean either a replacement route or a new service near Cypress Street. We hydrovac expose marked lines before drilling close to them; near the water system or an electric conduit route, paint alone does not show a utility’s depth.

Do you cover Hallsville and nearby Easton?
Hallsville is an incorporated city in Harrison County, with 3.99 square miles of land and an elevation of 361 feet. Its ZIP code is 75650. Easton is 8.2 miles south, while Nesbitt is 9.4 miles northeast. Longview, the nearest larger city, is 11.4 miles west; Marshall, the county seat, is 12.8 miles east. We measure Hallsville at 355 road miles and a 6.8 hour drive from our Yukon, Oklahoma main office. That distance is part of planning a crew and equipment trip for a local bore.
Places near Hallsville
- Directional boring in Easton: 8.2 miles south
- Nesbitt: 9.4 miles northeast
- Directional boring in Lakeport: 10.5 miles southwest
- Directional boring in Lake Cherokee: 10.7 miles southwest
- Directional boring in Longview: 11.4 miles west
What boring work comes up near Hallsville’s Main Street?
- Highway crossing: A bore under US 80 or FM 450 can pass beneath existing pavement without cutting across the highway surface.
- Rail crossing: A route beneath the 2.78 miles of Union Pacific track in Hallsville needs the railroad’s agreement and crossing plan.
- Creek crossing: A route under Wards Creek is planned below the channel and checked for federal jurisdiction during planning.
- Water service: A connection near the City of Hallsville system can be bored beneath Central Street to avoid an open cut.
- Fiber route: Fiber conduit beneath Cypress Street can follow a planned path around marked utilities and pavement.
- Replacement bore: An older service near Main Street can be replaced by boring between pits instead of opening the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Hallsville bore under US 80?
Start with a map pin or address: the exact point matters near US 80, Wards Creek and the Union Pacific track because each changes the route and crossing plan. For a Hallsville bore, we need you to tell us what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit pits and any nearby pavement or drainage.
A short route on open ground near Main Street is simpler to plan than a crossing beneath US 80 or Union Pacific track. Hallsville’s sticky clay can call for staged reaming and careful fluid control; a Wards Creek crossing adds drainage planning. Length, pipe size, soil or rock, marked utilities, pavement, pit and excavator needs all affect the scope. The 355 road miles from Yukon also make mobilization part of planning, especially for high profile or emergency work.
Questions people ask about boring in Hallsville
Does Trinity Boring Solutions take directional boring work in Hallsville and Harrison County?
Yes. We take work in Hallsville and across Texas, with our own crews and vetted partner drilling contractors available to staff the job. Our main office is in Yukon, Oklahoma, and you work with Trinity through the bore log. A route under US 80 or near Wards Creek is planned for its specific crossing.
Who is responsible for Central Street in Hallsville, and can a bore avoid cutting it?
Central Street is a city street, so it falls under the city rather than Harrison County. A directional bore can pass beneath the street between pits, leaving the pavement uncut when the route and conditions allow. The 1.45 miles of Central Street mapped within Hallsville make the exact entry and exit locations important.
What do Hallsville’s Cypress Street homes and buried lines mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put Hallsville’s median housing year at 1993, with 24 percent of homes built before 1960. That age mix can mean a replacement line or a new service. Near Cypress Street, we expose marked utilities before drilling close to them because a locate mark shows position, not depth.
Could water or flood prone ground affect bore pits near Hallsville’s Wards Creek?
It could. The soil survey maps a seasonal water table within 60 inches across 76 percent of Hallsville, and flood prone soils across 11 percent. Near Wards Creek, we plan pit locations and depth for wet ground and keep the crossing below the channel. Waterway jurisdiction is checked during planning.
Does Hallsville’s Sacul soil corrode steel, and what pipe should I use?
The Hallsville soil survey maps high steel corrosion risk across 81 percent of the area, so the line owner should consider casing and tracer wire materials. HDPE is not subject to the same soil corrosion concern. The right choice depends on the line and design, including a route through Sacul soil.
What ground does a Hallsville bore pass through in Sacul soil?
The USDA soil survey maps Sacul very fine sandy loam across 29 percent of Hallsville. At about 40 inches, it maps clay across 68 percent of the area and sandy clay loam across 21 percent. That clay can cling to the reamer, so crews adjust fluid and ream in stages rather than treating the map as a site test.
How much notice does Texas811 need for a Hallsville bore near Main Street?
For a Main Street excavation, request the Texas811 locate at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. For Hallsville work, if the start slips more than 14 days past the original notice, we need a new request. Before Hallsville work continues, we ask you to refresh worn or moved marks through Texas811.
How far is Hallsville from the Yukon office, and does Longview affect the job?
We measure Hallsville at 355 road miles and a 6.8 hour drive from our Yukon, Oklahoma main office. Longview is 11.4 miles west of Hallsville, but it does not change the route distance from Yukon. Mobilization planning accounts for the trip and the specific work, such as a crossing beneath US 80.
What affects the cost of directional boring in Hallsville under US 80?
The work plan drives the price. A bore under US 80 may need highway permitting and cover planning, while Hallsville’s clay, pavement, exposed utilities and any Wards Creek crossing can add work. Length, pipe size, pits, excavator time and distance for mobilization also matter. We need the proposed route and scope to assess those factors.
Where the Hallsville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hallsville
- U.S. Census Bureau, TIGER/Line 2024: Hallsville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hallsville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hallsville housing units and year built
- Macrostrat geologic map compilation: map units under Hallsville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Hallsville
- U.S. Department of Transportation, North American Rail Network: track owners in Harrison County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Harrison County
- U.S. Geological Survey, Elevation Point Query Service: Hallsville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hallsville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hallsville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hallsville, Texas
Type the address of your job in Hallsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hallsville
Same county: Marshall · Waskom · Scottsville · Uncertain. All counties: Texas county list.
