Lake Cherokee Texas Directional Boring: Redsprings Soil, FM 1716 And Mud Creek
Quick Answer: For a bore beside FM 1716, confirm the water provider for that address; utilities including Oncor Electric Delivery Company report service in Rusk County, so identify the conduit owner first. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Lake Cherokee, including routes near Mud Creek. The Yukon main office is 353 road miles away, and a route on Cherokee Trail affects mobilization planning. USDA maps sandy clay loam at 40 inches across 41% of the area; that clay can grip the reamer and pipe.
Lake Cherokee bores at a glance
- Unincorporated community in Rusk County and Gregg County, Texas. Population 2,980 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 353 miles, about 6.8 hours of driving.
- Ground: Redsprings soil is mapped on 13 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 36 percent of the area.
- Highways inside the boundary: FM 1716, Texas State Highway 149, FM 2011, FM 782 and FM 2963. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Mud Creek and Cherokee Bayou.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Lake Cherokee and FM 1716?
The water provider for a Lake Cherokee address must be confirmed before a bore, while Oncor Electric Delivery Company and other utilities report service in Rusk County; the actual line owner must be identified before conduit work. The 2020 Census counted 2,980 people here. Along FM 1716 or Sharp Street, we install water, sewer, gas, electric conduit and fiber by directional boring.
Our main office is in Yukon, Oklahoma, and Lake Cherokee work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. More than 25 years without a utility strike matters on a Cherokee Trail bore, where marked lines must be exposed before the drill approaches. The family company dates to 1965, and our directional boring work dates to 1982; that experience is brought to FM 1716 line crossings.

What does Redsprings soil mean for a bore in Lake Cherokee?
Redsprings soil is mapped across 13% of Lake Cherokee, and sandy clay loam is the leading texture at about 40 inches below the surface. The USDA soil survey maps that texture across 41% of the area at that depth, with clay across 15% and clay loam across another 15%. Only 4% is mapped as sandy at that depth. These are mapped patterns, not test borings. Clay can cling to a reamer and grip pipe, so the actual route matters more than the community wide pattern.
| USDA soil survey, inside the Lake Cherokee mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Redsprings 13 percent, Cuthbert 12 percent, Tenaha 11 percent, Kirvin 9 percent and Lilbert 8 percent |
| Texture at the surface | fine sandy loam 25 percent, loamy fine sand 21 percent and gravelly fine sandy loam 20 percent |
| Texture about 40 inches down | sandy clay loam 41 percent, clay 15 percent and clay loam 15 percent |
| Engineering class about 40 inches down | lean clay (CL) 40 percent, clayey sand (SC) 14 percent and fat clay (CH) 10 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | 36 percent of the area (0 percent hard rock, 36 percent weathered rock) |
| Seasonal water table within 60 inches | 15 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 27 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 36% of Lake Cherokee, all of it weathered; hard bedrock is not mapped at that depth. Seasonal water tables are mapped within 60 inches across 15%, and flood prone soils across 5%, so pits near a creek may need water management and a channel crossing needs depth planning. High steel corrosion risk is mapped across 27%, a concern for casing and tracer wire that the line owner should consider. The geologic map shows Eocene Carizzo Sand, a sandstone unit, so weathered rock may slow a bore.
How do we bore Lake Cherokee sandy clay loam?
Lake Cherokee’s sandy clay loam at about 40 inches can cling to tooling, while mapped weathered Carizzo Sand may slow progress. We adjust the bore to the route and the ground we encounter.
- With sandy clay loam mapped across 41% of the area at 40 inches, we manage sticky cuttings with thinner drilling fluid, polymer and staged reaming.
- Where the route reaches mapped loamy fine sand or gravelly fine sandy loam, we build a stabilizing fluid wall and stage the ream to limit hole collapse.
- If a bore encounters the Eocene Carizzo Sand, its weathered sandstone may call for a slower pace and a bit suited to softer rock.
- For a route near Mud Creek or a seasonal water table area, we keep pits manageable, pump water as needed and plan depth beneath the channel.

What might a Lake Cherokee bore cross near Mud Creek?
FM 1716, Texas State Highway 149, FM 2011, FM 782, FM 2963 and Texas State Highway 322 run inside the mapped Lake Cherokee community boundary. A bore along one of these routes needs a plan that accounts for the roadway and its right of way. Cherokee Trail is the longest named street at 11.7 miles inside the community; Lake Cherokee measures 6.54 miles, and Sharp Street and Garden Drive measure 1.46 and 1.43 miles. Those streets help locate a route and its access points.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1716 | State highway | 5.2 roadway miles inside | State highway office |
| Texas State Highway 149 | State highway | 4.3 roadway miles inside | State highway office |
| FM 2011 | State highway | 2.7 roadway miles inside | State highway office |
| FM 782 | State highway | 2.4 roadway miles inside | State highway office |
| FM 2963 | State highway | 0.7 roadway miles inside | State highway office |
| Texas State Highway 322 | State highway | 0.2 roadway miles inside | State highway office |
| Mud Creek | Stream | 0.86 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cherokee Bayou | Stream | 0.43 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Watt Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lee Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Massey Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Cherokee | Lake or pond | 2,453 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the community or within 1 mile outside it, so the public record does not show a local track crossing to plan around. Mud Creek runs 0.86 channel miles inside Lake Cherokee, and Cherokee Bayou runs 0.43 channel miles. Three mapped street crossings of named streams make creek and drainage details worth checking against the proposed route. Lake Cherokee itself is a 2,453 acre lake inside the community, so a route near its shore needs its own crossing review.
Who approves a Lake Cherokee bore in Rusk County?
Lake Cherokee has no city government, so its local streets are not city streets; county or state authority depends on the road. For work in the right of way of FM 1716 or another state highway, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Tyler District reviews it. The utility owner files, while we prepare the bore plan and profile and work under the issued permit. Beneath existing highway pavement, TxDOT rules require boring or tunneling. A Mud Creek or Cherokee Bayou crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already in the ground in Lake Cherokee, Rusk County?
For an address near FM 2011, the water provider has to be confirmed with the county or local water district before a bore is planned; Lake Cherokee is unincorporated and has no city government to identify a provider. Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report service in Rusk County. For conduit near Sharp Street, confirm which utility owns the line at that address before setting the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County and Gregg County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lake Cherokee’s median housing year at 1994; 9% of homes were built before 1960, 54% from 1960 to 1999 and 37% in 2000 or later. That mix can mean either replacement work or a new service along Garden Drive. Before drilling near a marked line, we hydrovac pothole to verify its depth and position, including water lines and electric conduit reported by utilities in Rusk County.

What places are near Lake Cherokee and Easton?
Lake Cherokee covers 12.29 square miles across Rusk County and Gregg County, with 79% in Rusk County and 21% in Gregg County, at an elevation of 358 feet. ZIP codes are 75652, 75603 and 75691. Easton is 3.8 miles northeast, Lakeport is 4.7 miles northwest, and Tatum is 8.3 miles east. Hallsville is 10.7 miles northeast, while Kilgore, the nearest larger city, is 12.5 miles west. Henderson, the Rusk County seat, is 16.4 miles southwest. The Yukon main office is 353 road miles away, a 6.8 hour drive.
Places near Lake Cherokee
- Directional boring in Easton: 3.8 miles northeast
- Directional boring in Lakeport: 4.7 miles northwest
- Directional boring in Tatum: 8.3 miles east
- Directional boring in Hallsville: 10.7 miles northeast
- Directional boring in Kilgore: 12.5 miles west
Which jobs call for a bore along Lake Cherokee’s Cherokee Trail?
- Highway crossing: A route under FM 1716 needs a bore plan that accounts for highway pavement, right of way and the utility owner’s permit.
- Water service: A new service near Garden Drive starts with confirming the address provider before selecting a tie in route.
- Fiber route: A fiber bore along Cherokee Trail can avoid open cuts across the street when pits fit on each side.
- Creek crossing: A proposed crossing at Mud Creek needs channel depth planning and a check for federal jurisdiction during design.
- Electric conduit: Along Sharp Street, identify the electric line owner before setting conduit size, route and pothole locations.
- Lake edge route: A bore near Lake Cherokee needs a route that accounts for the lake shore and access for entry and exit pits.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Lake Cherokee bore near Garden Drive?
To quote a bore off Garden Drive, we need the address or map pin, what goes underground, pipe or conduit size and footage; a sketch or plans help. Include whether the route reaches FM 782 or crosses Mud Creek, because those details change how we plan the bore.
Mobilization starts with the 353 road miles from Yukon, then the route and work scope shape the price. Redsprings soil and possible weathered Carizzo Sand affect drilling time; a crossing at FM 1716, a creek or drainage, and the utilities exposed along Garden Drive add planning and field work. Pipe size, bore length, pavement or concrete, pits, excavator time, sand backfill and emergency timing can also change the job.
Questions people ask about boring in Lake Cherokee
Does Trinity take directional boring work in Lake Cherokee in Rusk County, and how are crews staffed?
Yes, Trinity takes directional boring work in Lake Cherokee, including routes along Cherokee Trail. Our own crews handle jobs, and partner drilling contractors from satellite yards may also staff the work after Trinity has vetted them. You work with Trinity through planning and the bore log, whichever crew is on site.
How much rock is mapped within five feet of the surface in Lake Cherokee?
The USDA soil survey maps bedrock within 60 inches across 36% of Lake Cherokee, and it is mapped as weathered rather than hard bedrock. Hard bedrock is not mapped at that depth. Eocene Carizzo Sand is the local mapped sandstone unit, so the ground at an individual bore can still call for slower drilling.
Who handles a permit for a Lake Cherokee bore under FM 1716?
For work in the FM 1716 right of way, the utility owner submits the application through TxDOT’s RULIS system, and the TxDOT Tyler District reviews it. We prepare the bore plan and profile for the owner’s application. Beneath existing highway pavement, the installation uses boring or tunneling rather than an open cut.
Can a new Lake Cherokee line be bored beneath Mud Creek?
A Mud Creek crossing can be planned as a bore, with the route and depth designed for the channel. The creek has 0.86 channel miles inside the community, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The site details determine the bore plan.
Which electric companies report service in Lake Cherokee, Rusk County, and who confirms conduit specs?
Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report service in Rusk County. That does not establish the owner at a specific Lake Cherokee address. Confirm the line owner there before choosing electric conduit specifications.
Who controls streets in Lake Cherokee, and would a bore on Sharp Street need a cut?
Lake Cherokee is an unincorporated community with no city government, so its streets are under county authority rather than a city street department. A bore on Sharp Street can pass beneath the pavement without cutting across it; entry and exit pits sit in dirt on either side where access allows.
How far is Lake Cherokee from Yukon, and does Kilgore affect the job?
Lake Cherokee is 353 road miles and a 6.8 hour drive from Trinity’s Yukon main office. Kilgore is 12.5 miles west and is the nearest larger city, but the Yukon distance still affects crew mobilization. The route and access near Kilgore do not replace checking the actual Lake Cherokee bore site.
How early should I call Texas811 for a Lake Cherokee bore along Cherokee Trail?
For a bore along Cherokee Trail, the locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, submit another request. Marks that wear off or move must be refreshed through Texas811 before work continues.
What affects the price of a directional bore in Lake Cherokee near FM 1716?
The job scope sets the price for a bore near FM 1716. Length, pipe or conduit size, Redsprings soil, weathered sandstone, pavement, utility crossings, pits and excavator time all affect the work. Creek crossings such as Mud Creek and the 353 road miles from Yukon can also change planning and mobilization.
Where the Lake Cherokee facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lake Cherokee
- U.S. Census Bureau, TIGER/Line 2024: Lake Cherokee boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Lake Cherokee population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lake Cherokee housing units and year built
- Macrostrat geologic map compilation: map units under Lake Cherokee
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County and Gregg County
- U.S. Geological Survey, Elevation Point Query Service: Lake Cherokee elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lake Cherokee
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lake Cherokee
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lake Cherokee, Texas
Type the address of your job in Lake Cherokee. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lake Cherokee
County: Gregg County directional boring. Same county: Longview · White Oak · Gladewater · Liberty City · Clarksville City · Warren City · Henderson · Overton · New London · Mount Enterprise · Reklaw. All counties: Texas county list.
