trinityboringsolutions.com

Hardin Texas Directional Boring: Anahuac Soil, Union Pacific Track, Highway 146

Quick Answer: Hardin is a small incorporated city, so its city streets belong to the city; we provide directional boring, also called horizontal directional drilling (HDD), for routes near Texas State Highway 146. The Yukon main office is 471 road miles away, and North Main is one local route to consider for access. Anahuac soil and heavy clay are common in the mapped ground, where sticky cuttings can build on a reamer. We adjust fluid and ream in stages to manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hardin bores at a glance

  • Incorporated city in Liberty County, Texas. Population 865 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 471 miles, about 9.2 hours of driving.
  • Ground: Anahuac soil is mapped on 40 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 146 and FM 834. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: Union Pacific and Union Pacific (line shown as out of service), with 4 mapped street and rail crossings.
  • Named streams inside the boundary: North Fork Long Island Bayou.
  • Public water: Hardin Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Hardin near Union Pacific track?

Trinity Boring Solutions takes directional boring work in Hardin, including routes along North Main and Texas State Highway 146. Hardin is a small incorporated city, so its city streets belong to the city itself. Hardin’s Census Bureau Vintage 2024 population estimate is 865, a figure we consider when planning underground work. We bore water, sewer, gas, electric conduit and fiber lines beneath streets or other marked routes where the project calls for them.

Our main office is in Yukon, Oklahoma, and Hardin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Hardin planning, we bring a family business established in 1965 and directional boring experience dating to 1982. The 3/4 inch service line to 48 inch casing range can fit utility work along Hardin Road or a larger crossing near Union Pacific track.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Anahuac soil affect a bore in Hardin?

Anahuac soil is the leading mapped series in Hardin, covering 40 percent of the city area in the USDA soil survey. At about 40 inches below the surface, the survey maps clay across 61 percent of the area and silt loam across 26 percent. Average clay content at that depth is 37 percent, and heavy clay is mapped across 69 percent. These are mapped soil patterns, not conditions verified at an individual bore. Clay can hold an open hole but stick to the reamer, so crews need to manage the fluid and reaming sequence.

USDA soil survey, inside the Hardin city limitsWhat is mapped
Soil series mappedAnahuac 40 percent, Evadale 26 percent, Labelle 7 percent, Buna 6 percent and Aris 6 percent
Texture at the surfacevery fine sandy loam 46 percent, silt loam 37 percent and loam 13 percent
Texture about 40 inches downclay 61 percent, silt loam 26 percent and clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 64 percent and lean clay (CL) 36 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches90 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel94 percent of the area

The USDA soil survey maps a seasonal water table within 60 inches across 90 percent of Hardin, so pits may need pumping; flood prone soils are mapped in only 1 percent of the area. High steel corrosion risk is mapped across 94 percent, which makes casing and tracer wire material a line owner decision; HDPE is not subject to that soil corrosion concern. Bedrock is not mapped within 60 inches. The geologic map shows the Pleistocene Beaumont Formation, areas predominantly clay, so deeper clay and silt remain relevant to planning.

How do crews handle clay while boring in Hardin?

For Hardin bores through Anahuac soil and mapped heavy clay, we use fluid and staged reaming to keep the hole workable without overloading the ground. The plan also accounts for the seasonal water table.

  1. Because Hardin soil maps show heavy clay across 69 percent of the area at about 40 inches, we use thinner fluid with polymer and ream in stages.
  2. Clay in the Beaumont Formation can grip pipe, so we plan the pull for the same day the hole is opened and watch returns near pavement.
  3. With a seasonal water table mapped within 60 inches across much of Hardin, we keep pits small and pump them if water collects.
  4. Before a bore near North Main, we hydrovac marked utilities on the path; a walkover locator tracks the drill head and crews log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Hardin line pass under North Fork Long Island Bayou?

Texas State Highway 146 and FM 834 both run through Hardin, with mapped roadway lengths of 3.4 miles and 1.5 miles inside the city. A route beneath either highway calls for a bore rather than an open trench through existing pavement. North Main is the longest named street at 2.1 miles. County Road 2367 and Hardin Road each have 0.77 miles mapped in the city, giving project planners several named corridors to check for access and existing lines.

CrossingTypeMapped extentWho has a say
Texas State Highway 146State highway3.4 roadway miles insideState highway office
FM 834State highway1.5 roadway miles insideState highway office
Union PacificRailroad1.42 track miles insideThe railroad
Union Pacific (line shown as out of service)Railroad0.26 track miles insideThe railroad
North Fork Long Island BayouStream0.8 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific track runs 1.42 miles inside Hardin, with another 0.26 miles shown as out of service; four street and rail crossings are mapped in the city. A crossing of the active track requires an agreement with Union Pacific. North Fork Long Island Bayou runs 0.8 channel miles through Hardin, and no street crossings of named streams are mapped. No lakes or ponds are mapped within one mile, but a bayou crossing still needs site specific planning.

Who approves a Hardin bore in Liberty County?

For work on Texas State Highway 146 or FM 834, the line owner, not the driller, files the utility permit through TxDOT’s online RULIS system; Trinity supplies the bore plan and profile for that filing. The TxDOT Beaumont District reviews it. Highway crossings need the required cover, including 60 inches for electric or communication lines and water lines, and 60 inches for pressurized sewer. For Hardin highway crossings, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement. Hardin’s city streets belong to the city, while a Union Pacific track crossing needs an agreement with the railroad. North Fork Long Island Bayou is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be near Hardin Water Supply Corporation routes?

Hardin Water Supply Corporation reports 2,044 service connections and 6,132 people served from groundwater wells. Those figures make its lines a key item to locate near North Main and other proposed routes. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County. We confirm the electric line owner for the address before planning a conduit bore, since countywide reporting does not identify the provider at every Hardin property.

Line ownerWhat it isSourceSize
Hardin Water Supply CorporationPublic water systemGroundwater wells2,044 connections, 6,132 people served
CenterPoint Energy, Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Liberty CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Hardin’s median housing year at 1974, context we consider when planning underground work. In Hardin, the survey estimates 18 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 16 percent in 2000 or later, guiding our underground planning. Along North Main, that range means a project may involve an existing service replacement or a new connection. We hydrovac marked lines on the bore path before drilling near them, since locate paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Hardin in relation to Liberty and nearby places?

Hardin is in Liberty County, about 8.2 miles north of Liberty, the county seat and nearest larger city. The incorporated city covers 2.59 square miles and sits at an elevation of 80 feet. We use Hardin ZIP codes 77575 and 77561 to check service area details when coordinating underground work. Dayton Lakes is 4.7 miles west, Hull is 5.7 miles east, Daisetta is 6.2 miles southeast, Kenefick is 7.0 miles southwest and Ames is 7.2 miles south. From the Yukon main office, the road distance is 471 miles and the drive is 9.2 hours, which is part of planning mobilization for work near FM 834.

Places near Hardin

Which jobs call for a bore near Hardin Road?

  • Highway crossing: A bore beneath Texas State Highway 146 keeps the route below pavement and allows the plan to account for highway cover.
  • Water service: A connection near North Main can be routed around existing lines associated with Hardin Water Supply Corporation.
  • Fiber conduit: A fiber route along Hardin Road can cross beneath the street without cutting its surface.
  • Rail crossing: A route beneath Union Pacific track needs an agreement with the railroad before the crossing work proceeds.
  • Bayou crossing: A line beneath North Fork Long Island Bayou needs a planned path and a check for Corps jurisdiction.
  • Electric conduit: Near FM 834, we confirm the address specific line owner before planning the conduit route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Hardin bore near Texas State Highway 146?

For a bore near Texas State Highway 146, send the address or map pin, what is going in the ground, the pipe or conduit size and footage. A sketch or plans help us assess the route, including nearby Union Pacific track or North Fork Long Island Bayou.

Mapped clay is the first local cost consideration because sticky cuttings can require careful fluid control and staged reaming. The route also matters: a Texas State Highway 146 crossing, Union Pacific track or North Fork Long Island Bayou can add crossing work and planning. Length, pipe or conduit size, marked utilities to expose, pavement, pits and excavator time all affect the scope. We account for the 471 road miles from Yukon when scheduling mobilization for directional boring work in Hardin.

Questions people ask about boring in Hardin

Does Trinity take directional boring work in Hardin, Liberty County, and how is it staffed?

Yes. We take directional boring work in Hardin, Liberty County, using our own crews and satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is working near North Main or another route in town.

Can groundwater near North Fork Long Island Bayou cause trouble for Hardin bore pits?

It can. Hardin’s mapped seasonal water table is within 60 inches across 90 percent of the area, so pits near North Fork Long Island Bayou may collect water and need pumping. We plan pit size and access around the wet ground, and check a bayou crossing for Corps jurisdiction during planning.

Does Anahuac soil in Hardin create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 94 percent of Hardin, including areas mapped as Anahuac soil. The line owner decides whether steel casing or tracer wire needs a coating. HDPE is not subject to that soil corrosion concern, but the material choice depends on the line and project requirements.

What ground does a bore pass through in Hardin near Anahuac soil?

Anahuac is the most common mapped soil series in Hardin, at 40 percent of the city area. At about 40 inches, the USDA soil survey maps clay across 61 percent and silt loam across 26 percent. Those are mapped conditions rather than a test at a specific route, so the bore plan still accounts for the actual site.

Is a directional bore in Hardin likely to hit rock?

Bedrock is not mapped within the top five feet of Hardin, but that does not rule out deeper rock. The geologic map identifies the Pleistocene Beaumont Formation, which is predominantly clay in the mapped area. A route near FM 834 still needs planning for the ground encountered along its actual bore path.

Who approves a Hardin bore beneath Texas State Highway 146?

The line owner files the TxDOT utility permit in RULIS, and the TxDOT Beaumont District reviews it. Trinity prepares the bore plan and profile for the owner’s application. A crossing beneath Texas State Highway 146 must also account for the applicable cover requirements and boring beneath existing highway pavement.

Can I reach Trinity after hours about an urgent bore near Hardin Road?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work near Hardin Road or elsewhere in Hardin. We also provide 24 hour emergency response, and the call can establish what line, route and site conditions need attention.

How early should I request Texas811 marks for a bore near North Main in Hardin?

Request a Texas811 locate at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before it. If a North Main start slips more than 14 days past the original notice, make a new request. In Hardin, we pause work and request refreshed marks through Texas811 if existing marks are worn or moved.

What affects the cost of a Hardin bore crossing Texas State Highway 146?

The route and job scope set the price, with clay conditions and the highway crossing among the first details to assess. Length and pipe or conduit size matter, as do utilities to expose, pavement, pits and equipment time. A Union Pacific or North Fork Long Island Bayou crossing may change the work plan, and mobilization from Yukon is another factor.

Where the Hardin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hardin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hardin, Texas

Type the address of your job in Hardin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hardin

Same county: Dayton · Cleveland · Plum Grove · Big Thicket Lake Estates · Devers · North Cleveland · Old River-Winfree. All counties: Texas county list.