Hull Texas Directional Boring: Evadale Soil, FM 834 And Batiste Creek
Quick Answer: Hull is an unincorporated community in Liberty County, so County Road 2043 is not governed by a city government. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for lines beneath FM 834 and other Hull routes. The Yukon, Oklahoma main office is 477 road miles from Union Pacific track in Hull. Evadale soil is mostly silt loam, which can soften when wet and needs controlled drilling fluid.
Hull bores at a glance
- Unincorporated community in Liberty County, Texas. Population 522 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 477 miles, about 9.4 hours of driving.
- Ground: Evadale soil is mapped on 73 percent of the area, with silt loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 834 and FM 770. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Batiste Creek in Hull?
Hull is an unincorporated community in Liberty County, so public streets such as Old 834 Road are county roads, not city streets. The Census Bureau counted 522 people here in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service routes along County Road 2042 and Old 834 Road.
Our main office is in Yukon, Oklahoma, and Hull work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record includes no utility strike in over 25 years, important where replacement bores meet lines served by CenterPoint Energy, Entergy Texas or Sam Houston Electric Cooperative in Liberty County. We have been a family business since 1965 and have done directional boring since 1982.

What ground should a bore expect in Hull’s Evadale soil?
The USDA soil survey maps Evadale soil across 73 percent of Hull, with silt loam covering 73 percent at about 40 inches below the surface. Bevil clay accounts for 19 percent of the mapped area, and Aris loam accounts for 3 percent. At that depth, clay makes up an average of 30 percent; heavy clay is mapped across 23 percent, while sandy ground is not mapped. These are mapped soil patterns, not site borings. The silt loam can drill quickly but may lose steering strength when wet.
| USDA soil survey, inside the Hull mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Evadale 73 percent, Bevil 19 percent and Aris 3 percent |
| Texture at the surface | silt loam 73 percent, clay 20 percent and loam 3 percent |
| Texture about 40 inches down | silt loam 73 percent, clay 21 percent and clay loam 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 73 percent and fat clay (CH) 23 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 96 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
In Hull, we do not map bedrock in the top five feet, but that does not rule out deeper rock. The USDA survey maps a seasonal water table within 60 inches across 96 percent of the area, so pits may need pumping. Flood prone soils cover 1 percent. High steel corrosion risk is mapped across 96 percent, a concern for steel casing and tracer wire that the line owner should address. The Beaumont Formation, areas predominantly clay, is Pleistocene; its clay and silt can make reaming sticky.
How do we bore Hull’s silt loam and clay ground?
Hull’s mapped silt loam can soften when wet, while Bevil clay can grip the reamer and pipe. We adjust fluid use and reaming to the ground along the specific bore route.
- In Hull’s mapped silt loam, we keep fluid pressure controlled so soft, wet ground does not wash out beneath pavement or a slab.
- Where Bevil clay occurs, staged reaming and a thinner fluid mix help limit sticky cuttings and reduce the chance of clay gripping the pipe.
- Because a seasonal water table is mapped within 60 inches across much of Hull, we keep pits compact and pump them if water collects.
- At County Road 2042, we locate the drill head from the surface and log depth and pitch; marked utilities on the route are exposed first.

Where might a Hull line need to go under FM 834?
FM 834 and FM 770 are state highways inside Hull’s mapped community boundary, with 2.5 and 2.1 mapped roadway miles respectively. A line crossing either route needs a bore plan that accounts for its right of way. County Road 2042 runs 0.84 miles inside the community, Old 834 Road runs 0.81 miles, and County Road 2043 runs 0.3 miles. Those named roads help locate service routes and access points; a map pin is needed to establish the actual crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 834 | State highway | 2.5 roadway miles inside | State highway office |
| FM 770 | State highway | 2.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.59 track miles inside | The railroad |
| Batiste Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Swamp | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Bastiste Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| East Fork Long Island Bayou | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.59 track miles inside Hull, and one street and rail crossing is mapped. A crossing of that track needs the railroad’s agreement, with its requirements set for the specific route. No named stream crossing by a street is mapped inside the community. Batiste Creek runs along or touches the boundary, and unnamed drainage covers 0.48 miles inside Hull, so a route near those features needs site review.
Who approves a Hull bore along Liberty County roads and highways?
Hull has no city government, so County Road 2042 and Old 834 Road are not city streets; the county is the street authority. FM 834 and FM 770 are state highways, and work in their right of way needs a TxDOT utility permit reviewed by the Beaumont District. The utility owner, not the boring contractor, files through TxDOT’s RULIS system. We prepare the bore plan and profile for that application and work under the permit issued to the owner. A bore under Union Pacific track also needs the railroad’s agreement. A Batiste Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utility lines should a Hull bore account for in Liberty County?
The water provider for a specific Hull address has to be confirmed with the county or local water district before a bore is planned; public records do not identify a system serving this community. CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County, but that does not identify the owner at every address. We confirm the line owner before planning a conduit bore near County Road 2043 or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in Liberty County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Hull’s median housing year at 1988; 11 percent of homes were built before 1960, 48 percent from 1960 to 1999 and 41 percent in 2000 or later. That mix can mean either replacement lines or new service routes along Old 834 Road. Before drilling near marked lines, we use hydrovac potholing to expose them; paint shows location, not depth.

Where is Hull in relation to Hardin and Liberty?
Hull is in Liberty County, about 11.5 miles northeast of Liberty, the county seat and nearest larger city. Hardin is 5.7 miles west, Daisetta is 2.2 miles south, Devers is 8.9 miles south, Ames is 9.0 miles southwest and Dayton Lakes is 10.4 miles west. The community covers 1.99 square miles, sits at 66 feet elevation and uses ZIP code 77564. The Yukon yard is 477 road miles away, a 9.4 hour drive, which affects crew mobilization to FM 834 or Old 834 Road.
Places near Hull
- Directional boring in Daisetta: 2.2 miles south
- Directional boring in Hardin: 5.7 miles west
- Directional boring in Devers: 8.9 miles south
- Directional boring in Ames: 9 miles southwest
- Directional boring in Dayton Lakes: 10.4 miles west
- Directional boring in Liberty: 11.5 miles southwest
What kinds of Hull bores might run near Old 834 Road?
- Highway crossing: A bore beneath FM 834 keeps the route below the paved roadway, with the utility owner arranging the TxDOT permit.
- Water service: A line along County Road 2042 needs the address specific water provider confirmed before the service route is set.
- Fiber conduit: A drop near Old 834 Road can be drilled below the road surface rather than opened along the pavement.
- Creek route: Near Batiste Creek, the bore plan accounts for drainage and checks whether the crossing falls under Corps jurisdiction.
- Rail crossing: A route beneath Union Pacific track needs the railroad’s agreement to establish crossing requirements.
- Street bore: At County Road 2043, potholing marked lines before drilling helps verify their depth and position.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a Hull quote near Union Pacific track?
Send a map pin or address, especially near Union Pacific track or Batiste Creek, where the exact route affects crossing planning. Tell us what line is going in, its pipe or conduit size and the footage. A sketch or plans help us check access, nearby roads and the proposed bore path before preparing a quote.
Price depends first on soil and crossing conditions: Evadale silt loam can soften when wet, while a route near Batiste Creek needs drainage review. Length and pipe or conduit size also matter, along with utilities to expose, pavement, pits and excavator time. A crossing at FM 834 or Union Pacific track adds specific planning. Mobilization also reflects the 477 road miles from Yukon, and high profile or emergency work can change the scope.
Questions people ask about boring in Hull
Does Trinity take directional boring work in Hull and Liberty County?
Yes, we take directional boring work in Hull and across Texas. Our main office is in Yukon, and work near Old 834 Road is staffed by our own crews or partner drilling contractors we have vetted. From the first call through the bore log, we stay your contact for Hull work, whichever crew is on site.
Can a utility line be bored beneath Batiste Creek at Hull?
A bore beneath Batiste Creek may be possible, but the route and ground conditions have to be assessed first. The creek runs along or touches Hull’s boundary, so planning checks whether the crossing is under Corps jurisdiction and accounts for channel depth and access.
Who owns the electric lines in Hull and Liberty County for a conduit bore?
CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County. That does not establish which company owns a line at a specific Hull address. Confirm the line owner and conduit requirements for the route near FM 770 before planning the bore.
Who controls County Road 2043 in Hull, and does it need to be cut?
Hull is unincorporated, so County Road 2043 is not under a city government; it is a county road. A directional bore can pass beneath the road without cutting the pavement, subject to the route and approvals. The map pin helps us check access and nearby marked utilities.
Do Hull homes near Old 834 Road need replacement bores for older lines?
Hull’s median housing year is 1988, according to the American Community Survey 2019 to 2023 five year estimates. That does not identify the age of buried lines near Old 834 Road, but replacement bores may be part of a project. On Hull work, we expose marked utilities before drilling near them to protect the planned bore path.
Could groundwater near Batiste Creek fill bore pits in Hull?
Yes, water can collect in pits: the USDA soil survey maps a seasonal water table within 60 inches across 96 percent of Hull. Batiste Creek borders the community, so a route there also needs drainage review. Small pits and pumping may help manage water at the work area.
How far is Hull from the Yukon office, and does nearby Liberty affect a job?
Hull is 477 road miles from Trinity’s Yukon, Oklahoma main office, about a 9.4 hour drive. Liberty is 11.5 miles southwest of Hull, but the long haul from Yukon can affect mobilization for work on FM 834 or another Hull road.
How early should I call Texas811 for a Hull bore near County Road 2042?
For a bore near County Road 2042, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work slips more than 14 days past the original notice, make a new request. For Hull work, we refresh worn or moved marks before we continue, so the markings stay current.
What affects the cost of a directional bore near FM 834 in Hull?
The route and ground set the work involved: wet silt loam, length, pipe or conduit size, utility exposures, pavement and pits all matter near FM 834. A Union Pacific or Batiste Creek crossing can add planning. Mobilization from Yukon also affects the job because Hull is 477 road miles from the main office.
Where the Hull facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hull
- U.S. Census Bureau, TIGER/Line 2024: Hull boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Hull population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hull housing units and year built
- Macrostrat geologic map compilation: map units under Hull
- U.S. Department of Transportation, North American Rail Network: track owners in Liberty County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Liberty County
- U.S. Geological Survey, Elevation Point Query Service: Hull elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hull
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hull
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hull, Texas
Type the address of your job in Hull. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hull
Same county: Dayton · Cleveland · Plum Grove · Kenefick · Big Thicket Lake Estates · North Cleveland · Old River-Winfree. All counties: Texas county list.
