Kenefick Texas Directional Boring: Vamont Clay, FM 1008 and Long John Creek
Quick Answer: Can you get a line under FM 1008, the Union Pacific track or Long John Creek without cutting the surface? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Kenefick, Texas, for those crossings. River Boat Bend is about 467 road miles from our Yukon, Oklahoma main office, so distance is part of planning. Vamont clay is common here and can stick to the reamer or grip pipe, so the bore needs a controlled plan.
Kenefick bores at a glance
- Incorporated city in Liberty County, Texas. Population 807 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 467 miles, about 9.1 hours of driving.
- Ground: Vamont soil is mapped on 23 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1008 and FM 2797. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Named streams inside the boundary: Long John Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring on River Boat Bend in Kenefick?
Yes, Trinity Boring Solutions takes directional boring work in Kenefick, Liberty County. The Census Bureau Vintage 2024 estimate puts the town’s population at 807. Along River Boat Bend or Martha Lane, we install water, sewer, gas, electric conduit and fiber lines by boring where a route needs to pass beneath a road, driveway or other surface.
Our main office is in Yukon, Oklahoma, and Kenefick work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. On a short service run near Parker Loop, we handle 3/4 inch service lines, as well as jobs involving casing up to 48 inches. Our family business began in 1965 and has done directional boring since 1982, experience we bring to Kenefick routes.

How does Vamont soil affect drilling in Kenefick?
Vamont soil is the largest mapped soil series in Kenefick, at 23 percent of the town’s area, and the USDA soil survey also maps Vamont clay with 0 to 1 percent slopes. At about 40 inches below the surface, clay makes up 79 percent of mapped texture, while the average clay content is 51 percent. That heavy clay can hold an open bore but may ball up on the reamer and grip the pipe. These are mapped patterns, not test borings, so the route still matters.
| USDA soil survey, inside the Kenefick city limits | What is mapped |
|---|---|
| Soil series mapped | Vamont 23 percent, Buna 19 percent, Dylan 16 percent, Kaman 12 percent and Evadale 10 percent |
| Texture at the surface | clay 51 percent, very fine sandy loam 34 percent and silt loam 12 percent |
| Texture about 40 inches down | clay 79 percent, silt loam 10 percent and very fine sandy loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 79 percent, lean clay (CL) 13 percent and silty clayey sand (SC SM) 6 percent |
| Average clay content about 40 inches down | 51 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 50 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 73 percent of the area |
The USDA soil survey maps a seasonal water table within 60 inches across 50 percent of Kenefick and flood prone soils across 15 percent, so pits near Long John Creek may need water management and a route below the channel. High steel corrosion risk covers 73 percent of the mapped area; the line owner should consider casing and tracer wire materials. In Kenefick, we treat bedrock as unmapped within the top five feet when planning a bore. The geologic map identifies Alluvial sand, silt, and clay of Pleistocene age, a mix of fine sand, silt, minor gravel and clay that can vary along a route.
What does boring Kenefick clay require for a directional bore?
Kenefick’s mapped clay needs a measured drilling pace, with the plan adjusted to the route and the soil actually encountered. Near Vamont and Dylan clay, we manage fluid and reaming to keep the hole workable.
- With Vamont clay mapped across 23 percent of Kenefick, we use thinner drilling fluid and staged reaming to limit sticky buildup on the reamer.
- Where heavy clay makes up much of the mapped soil at about 40 inches, we watch fluid returns and keep pressure controlled beneath pavement.
- The USDA survey maps a seasonal water table within 60 inches across 50 percent of town, so we plan compact pits and pump water if needed.
- For Long John Creek, we plan the bore below the channel, track the drill head from the surface and record depth and pitch as it advances.

What does a bore have to cross in Kenefick near FM 1008?
FM 1008 and FM 2797 run inside Kenefick, with 2.7 mapped roadway miles of FM 1008 and 2.4 miles of FM 2797 in town. A line crossing either state highway needs a bore plan that fits the highway route. River Boat Bend is the longest named street, at 1.21 miles in town; Martha Lane measures 0.33 miles and Parker Loop 0.28 miles. Those streets can call for service bores beneath paved or unpaved access without cutting the surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1008 | State highway | 2.7 roadway miles inside | State highway office |
| FM 2797 | State highway | 2.4 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.59 track miles inside | The railroad |
| Long John Creek | Stream | 0.32 channel miles inside | Checked for Corps of Engineers jurisdiction |
| French Bayou | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Trinity River | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.59 track miles inside Kenefick, and public records map one street and rail crossing in town. A rail route needs to account for the track owner’s crossing agreement. Long John Creek runs 0.32 channel miles within town, with one mapped street crossing of a named stream. French Bayou and the Trinity River are each 0.8 miles from the limits. A creek route needs channel depth planning and a jurisdiction check.
Who has to sign off on Kenefick bores near Union Pacific?
FM 1008 and FM 2797 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the Beaumont District. The utility owner, not the drilling contractor, submits the application through TxDOT’s RULIS system; we provide the bore plan and profile and work under the owner’s permit. Kenefick’s city streets belong to the town itself. A crossing beneath Union Pacific track needs an agreement from the railroad that owns it, with crossing conditions set through that agreement. A Long John Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Kenefick, Liberty County?
The water provider for a specific Kenefick address has to be confirmed with the town, Liberty County or the local water district before a bore is planned. Electric service reported in Liberty County includes CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative; that does not identify the line owner at every address. Before a conduit bore along FM 1008 or another route, we confirm the owner of the line and the conduit requirements for that job.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in Liberty County | EIA Form 861 | Confirm the line owner by address |
Kenefick’s 2019 to 2023 five year estimate puts median housing year at 1994, which informs our underground planning. For underground work in Kenefick, we consider the survey’s housing age mix: 4 percent before 1960, 72 percent from 1960 to 1999 and 24 percent in 2000 or later. That mix can mean work for replacement lines as well as new services near Parker Loop. Paint shows a marked line’s position, not its depth, so we expose marked utilities with hydrovac before drilling near them.

Do you cover Kenefick and nearby Liberty?
Kenefick is an incorporated town in Liberty County, with 1.55 square miles of land at an elevation of 40 feet. ZIP code 77535 serves the town. Dayton Lakes is 3.2 miles northeast, Liberty is 5.4 miles southeast, Hardin is 7.0 miles northeast, Ames is 7.4 miles southeast and Dayton is 8.4 miles southwest. Liberty is both the county seat and the nearest larger city. The Yukon yard is 467 road miles away, a 9.1 hour drive, so mobilization is part of planning for Kenefick work.
Places near Kenefick
- Directional boring in Dayton Lakes: 3.2 miles northeast
- Directional boring in Liberty: 5.4 miles southeast
- Directional boring in Hardin: 7 miles northeast
- Directional boring in Ames: 7.4 miles southeast
- Directional boring in Dayton: 8.4 miles southwest
What kinds of bores come up around Martha Lane in Kenefick?
- Highway crossing: A bore beneath FM 1008 keeps the line below the roadway rather than opening a trench through the highway surface.
- Street service: A water or sewer service along River Boat Bend can pass beneath a driveway or street without an open cut.
- Fiber route: Fiber conduit near Martha Lane can be placed underground while keeping the route clear of marked lines exposed before drilling.
- Creek crossing: A Long John Creek bore needs a planned depth below the channel and a check of federal water jurisdiction.
- Rail crossing: A route beneath Union Pacific track needs the railroad owner’s agreement and crossing conditions addressed in the plan.
- Local conduit: An electric conduit route near Parker Loop starts with confirming the line owner and locating buried utilities along the path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore on County Road 6432 in Kenefick?
For a County Road 6432 bore, start with the address or map pin so we can place the route. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show nearby features like FM 1008 or Long John Creek.
A short route in Vamont clay with no pavement, track or creek crossing is simpler to plan than a bore under FM 1008 or Union Pacific track. Price reflects bore length, line size, soil, exposed utilities, pavement, creek or drainage crossings, pits, excavator time, sand backfill and urgent or high profile work. Kenefick’s 467 road miles from Yukon also affect mobilization. Long John Creek or wet ground can add planning and site work.
Questions people ask about boring in Kenefick
Does Trinity Boring Solutions take jobs in Kenefick, Liberty County, and who does the work?
Yes, we take directional boring work in Kenefick, Liberty County. The work uses our own crews or crews from partner drilling contractors we have vetted, with Trinity handling the job from the first call through the bore log. For a route near River Boat Bend, the address and planned line help us assess the scope.
Who approves a bore under FM 1008 in Kenefick, and which TxDOT office reviews it?
TxDOT reviews a utility permit for work in the FM 1008 right of way, and the Beaumont District handles the review for Liberty County. The utility owner files through the state’s RULIS system. We prepare the bore plan and profile for that filing, then work under the permit issued to the utility owner.
What does a Kenefick bore under Union Pacific track require?
A bore beneath the Union Pacific track needs an agreement with the railroad that owns it. The railroad sets the crossing conditions, including casing, depth and flagging. Kenefick has 0.59 track miles within town, so a route near the mapped track crossing should be planned with the railroad’s requirements in view.
Can you bore a line under Long John Creek in Kenefick?
Yes, a line can be planned beneath Long John Creek, which runs 0.32 channel miles inside Kenefick. The route needs to pass below the channel, and planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Mapped flood prone soils cover 15 percent of town, so the site and pit locations matter.
Which electric companies report service in Kenefick, Liberty County, and who confirms conduit needs?
CenterPoint Energy, Entergy Texas and Sam Houston Electric Cooperative report electric service in Liberty County, but those records do not identify the provider for every Kenefick address. The electric line owner must be confirmed for the specific route, and that owner can confirm conduit requirements before a bore is planned near Parker Loop or FM 2797.
Who is responsible for Parker Loop in Kenefick, and does a bore require cutting it?
Parker Loop is a town street because Kenefick is incorporated. A directional bore can pass beneath the street without cutting its surface, with entry and exit pits placed beside the route where conditions allow. The exact plan depends on the marked utilities and access at the proposed Parker Loop address.
Can I reach Trinity after hours about an urgent bore on Parker Loop in Kenefick?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Parker Loop, share the location, what line needs to go underground and any known crossing or utility concerns. Emergency response is available, and the site details determine the work plan.
How far ahead should I call 811 for a Kenefick bore near River Boat Bend, and what if marks change?
Paint near River Boat Bend shows a utility’s position, not its depth. Texas law requires a Texas811 request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days, make a new request; have worn or moved marks refreshed before work continues.
What affects the price of a directional bore under FM 1008 in Kenefick?
The route, length, line size and ground conditions all affect the price of a bore under FM 1008. Pavement, utilities to expose, creek or drainage crossings, pits, excavator time and backfill also change the work involved. Kenefick’s clay and distance from Yukon can affect drilling and mobilization, while permit and railroad requirements may shape a crossing plan.
Where the Kenefick facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kenefick
- U.S. Census Bureau, TIGER/Line 2024: Kenefick boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kenefick
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kenefick housing units and year built
- Macrostrat geologic map compilation: map units under Kenefick
- U.S. Department of Transportation, North American Rail Network: track owners in Liberty County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Liberty County
- U.S. Geological Survey, Elevation Point Query Service: Kenefick elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kenefick
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kenefick
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kenefick, Texas
Type the address of your job in Kenefick. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kenefick
Same county: Cleveland · Plum Grove · Daisetta · Big Thicket Lake Estates · Hull · Devers · North Cleveland · Old River-Winfree. All counties: Texas county list.
