Coolidge Texas Directional Boring: Wilson Clay, FM 73 and Sandy Creek
Quick Answer: Can you get a line under Sandy Creek without cutting the creek bank? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Coolidge crossings such as Sandy Creek. From our Yukon, Oklahoma main office, the drive is 300 road miles, including work near FM 73. Wilson clay loam and heavy clay can stick to the reamer or grip pipe, so we plan staged reaming and fluid for the ground. A bore can keep Bell Street pavement uncut.
Coolidge bores at a glance
- Incorporated city in Limestone County, Texas. Population 800 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 300 miles, about 5.9 hours of driving.
- Ground: Wilson soil is mapped on 41 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 9 percent of the area.
- Highways inside the boundary: FM 73, Texas State Highway 171 and FM 1951. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Sandy Creek.
- Public water: City of Coolidge, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Sandy Creek in Coolidge?
Trinity Boring Solutions takes directional boring work in Coolidge, Limestone County, for lines routed beneath FM 73, Bell Street or Sandy Creek approaches. Can you get a line under a road or creek without cutting it? Yes, we plan a bore around the crossing. The Census Bureau Vintage 2024 estimate puts Coolidge at 800 people, and we install water, sewer, gas, electric conduit and fiber along its streets and routes.
Our main office is in Yukon, Oklahoma, and Coolidge work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With Coolidge 300 road miles from our Yukon main office, our family business began in 1965 and we have done directional boring since 1982. Four decades of boring experience inform how we plan around Coolidge’s Wilson clay loam, which can hold a hole open but also cling to the reamer and pipe.

What is Coolidge ground like around Wilson soil?
The USDA soil survey maps 41% of Coolidge as Wilson clay loam, 0 to 2 percent slopes, with Houston Black clay at 25% and Heiden clay at 16%. These mapped patterns are not test borings, so a route still needs job specific planning. Clay makes up 45% of the mapped surface texture. At about 40 inches below the surface, clay is mapped across 90% of the area and clay loam across 6%; the average clay content there is 49%.
| USDA soil survey, inside the Coolidge city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 41 percent, Houston Black 25 percent, Heiden 16 percent, Mabank 5 percent and Ferris 5 percent |
| Texture at the surface | clay 45 percent, clay loam 41 percent and fine sandy loam 6 percent |
| Texture about 40 inches down | clay 90 percent and clay loam 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 90 percent and lean clay (CL) 6 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 9 percent of the area (0 percent hard rock, 9 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
Weathered bedrock is mapped within 60 inches across 9% of Coolidge; the typical mapped depth is 49 inches, and hard bedrock is not mapped within that depth. We plan Coolidge bores through Wilson soil carefully because seasonal water table and flood prone soils are not mapped. High steel corrosion risk is mapped across 95%, so the line owner should consider casing and tracer wire materials; HDPE is unaffected by that soil corrosion concern. The geologic map names Nacatoch Sand, a Maastrichtian sandstone unit, which may mean slower drilling where weathered rock is encountered.
How do we bore through Coolidge clay near Sandy Creek?
We handle Coolidge clay by controlling fluid and opening the hole in stages, rather than forcing a fast pull through Wilson and Houston Black soils. Sticky ground can build on the reamer and grip pipe, so the pull timing matters.
- Wilson clay loam holds an open hole but can stick to tooling, so we use thinner fluid with polymer and open the Coolidge bore in stages.
- Where Coolidge heavy clay is present, we watch fluid returns near pavement so pressure does not lift the surface along Bell Street.
- We expose each marked utility on a Coolidge bore path with hydrovac before the drill approaches; paint near FM 73 shows position, not depth.
- A walkover locator tracks the drill head on a Coolidge route, with depth and pitch logged as the bore advances beneath Sandy Creek or a street.

What does a bore have to cross in Coolidge near FM 73?
FM 73 accounts for 1.6 mapped roadway miles within Coolidge, while Texas State Highway 171 has 0.8 and FM 1951 has 0.5. A route under an existing highway pavement is bored or tunneled rather than opened through the pavement. Bell Street is the longest named street at 1.46 miles in town, followed by 1st Street at 0.92 miles and 2nd Street at 0.91 miles. Kirven Street adds another named route to consider when locating pits and crossings.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 73 | State highway | 1.6 roadway miles inside | State highway office |
| Texas State Highway 171 | State highway | 0.8 roadway miles inside | State highway office |
| FM 1951 | State highway | 0.5 roadway miles inside | State highway office |
| Sandy Creek | Stream | 0.2 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Sandy Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Coolidge or within one mile outside town, and no mapped street and rail crossing appears in the town. Sandy Creek runs 0.2 channel miles through Coolidge, with one mapped street crossing of a named stream. West Sandy Creek is mapped 0.9 miles from the town limits. A creek route needs its own crossing plan, and no lakes or ponds are mapped within one mile.
Who approves a bore in Limestone County near Coolidge?
For a bore under FM 73, Texas State Highway 171 or FM 1951, the utility owner needs a TxDOT utility permit for work in the highway right of way. The owner files through TxDOT’s RULIS system, and the TxDOT Waco District reviews it; we prepare the bore plan and profile for that filing. Electric and communication crossings need 60 inches of cover below the lowest crossed grade, and water crossings need 60 inches. Coolidge’s Bell Street and Kirven Street are city streets, so city street work is handled by the city. A Sandy Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Coolidge water lines?
The City of Coolidge public water system uses purchased surface water and reports 348 service connections serving 786 people. For a water bore near Bell Street, we hydrovac pothole marked utilities on the route before drilling close to them. In Limestone County, Entergy Texas, Oncor Electric Delivery Company, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative report electric service. Before planning an electric conduit bore on Bell Street, we confirm the line owner for that specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Coolidge | Public water system | Surface water bought from another system | 348 connections, 786 people served |
| Entergy Texas, Oncor Electric Delivery Company, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative | Electric utilities reporting service in Limestone County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Coolidge’s median housing year at 1978; 25% of homes were built before 1960, 43% from 1960 to 1999 and 32% in 2000 or later. That mix can mean a Bell Street project involves replacing older pipe or adding a newer service. Before the drill approaches marked lines near the City of Coolidge water system, hydrovac potholing exposes them so their depth can be checked.

Where is Coolidge in relation to Mexia and Yukon?
Coolidge is in Limestone County, covers 0.95 square miles and sits at an elevation of 535 feet. Its ZIP code is 76635. Tehuacana is 6.6 miles east, Dawson is 10.5 miles north, and Mexia is 11.1 miles southeast; Mexia is the nearest larger city. Groesbeck, the county seat, is 17.2 miles southeast. From our Yukon, Oklahoma main office, Coolidge is 300 road miles away and a 5.9 hour drive, which affects mobilization for a Bell Street or FM 73 project.
Places near Coolidge
- Directional boring in Tehuacana: 6.6 miles east
- Directional boring in Dawson: 10.5 miles north
- Directional boring in Hubbard: 10.9 miles northwest
- Directional boring in Mexia: 11.1 miles southeast
- Directional boring in Wortham: 11.5 miles east
What would we bore near Bell Street in Coolidge?
- Highway crossing: A bore beneath FM 73 keeps the existing pavement uncut, with the route and cover planned for the state highway.
- Street service: A water or sewer line under Bell Street can cross the pavement without an open cut across the traveled surface.
- Fiber conduit: A route along 1st Street can carry conduit while avoiding a continuous trench through the street corridor.
- Creek crossing: A Sandy Creek bore can pass below the channel, with the crossing reviewed for federal jurisdiction during planning.
- Water service: A connection near the City of Coolidge system needs marked lines exposed before the drill gets close to them.
- Utility conduit: Near Kirven Street, we confirm the electric line owner before planning a conduit route and its marked crossings.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Coolidge bore near Kirven Street?
A map pin matters for a Kirven Street quote because a small shift can change the nearby lines, pavement and distance to a Sandy Creek crossing. For a 1st Street request, we need the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans help us see the route, entry and exit pits, and any marked crossings.
Coolidge’s clay is the first pricing concern because it can load the reamer and hold pipe, affecting fluid use, staged reaming and pull timing. Next, we look at bore length and pipe size, then the utilities to expose and cross near Bell Street or FM 73. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also shape the work. The 300 road miles from Yukon affect mobilization, while high profile or emergency work can add planning demands.
Questions people ask about boring in Coolidge
Does Trinity take directional boring work in Coolidge and Limestone County, and who staffs it?
Yes, we take Coolidge and Limestone County work, with our own crews and crews from satellite yards operated by partner drilling contractors we have vetted. For Coolidge requests near Tehuacana, we stay with you from the first call through the bore log. For a route near Bell Street, the address and crossing details help us plan the crew and equipment.
What is the ground like for a Coolidge bore through Wilson soil?
The USDA soil survey maps Wilson clay loam across 41% of Coolidge, and clay accounts for 90% of the mapped texture at about 40 inches. That sticky material can collect on the reamer and grip pipe. We plan staged reaming and fluid for a route near Kirven Street, while treating the map as a guide rather than a site boring.
Will a Coolidge bore run into rock near Sandy Creek?
Some mapped weathered bedrock is present within 60 inches, across 9% of Coolidge; hard bedrock is not mapped within that depth. The geology map identifies Nacatoch Sand, a Maastrichtian sandstone unit. A route near Sandy Creek still needs job specific evaluation, since the mapped pattern does not establish the exact ground below a particular bore.
Who approves a Coolidge bore under FM 73?
TxDOT reviews a utility owner’s permit application for work in the FM 73 right of way. The owner submits it through RULIS, and the TxDOT Waco District reviews the filing; we provide the bore plan and profile for the owner. The permit sets the route details, including any required cover that differs from the standard depth.
Can a line be bored under Sandy Creek in Coolidge?
A line can be planned beneath Sandy Creek, which has 0.2 channel miles mapped inside Coolidge. The crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We also plan the entry and exit pits so the creek channel and its banks can remain uncut.
Who runs Coolidge’s water system in Limestone County, and where does its water come from?
For Limestone County planning, we recognize the City of Coolidge owns the public water system and uses purchased surface water. With 348 service connections serving 786 people, we plan Coolidge underground work around the recorded system scale. For a bore near Bell Street, the specific water line and its owner still need to be identified and marked along the proposed route.
Does Trinity cover Tehuacana and rural sites outside Coolidge?
Yes, we take work around Tehuacana and at rural sites outside Coolidge, as well as in town. Tehuacana is 6.6 miles east of Coolidge, and the service area is not limited to the incorporated town. A pin or address helps us assess access and mobilization for a route near FM 73.
How much notice does Texas811 need for a Coolidge bore near Bell Street?
For a Bell Street bore, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days beyond the original notice, make a new request. Near Texas State Highway 171, we stop if marks are worn or moved and have them refreshed through Texas811 before work continues.
What affects the price of a Coolidge directional bore near FM 73?
The mapped clay near FM 73 is a key factor because it can affect reaming and pipe pull. Length, pipe or conduit size, soil and rock, and the number of utilities to expose all affect the plan. Pavement, Sandy Creek or drainage crossings, pits, excavator time, backfill and mobilization from Yukon also shape the price.
Where the Coolidge facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Coolidge
- U.S. Census Bureau, TIGER/Line 2024: Coolidge boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Coolidge
- U.S. Census Bureau, American Community Survey 2019 to 2023: Coolidge housing units and year built
- Macrostrat geologic map compilation: map units under Coolidge
- U.S. EPA Safe Drinking Water Information System: public water systems serving Coolidge
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Limestone County
- U.S. Geological Survey, Elevation Point Query Service: Coolidge elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Coolidge
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Coolidge
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Coolidge, Texas
Type the address of your job in Coolidge. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Coolidge
Same county: Groesbeck · Kosse · Thornton. All counties: Texas county list.
