trinityboringsolutions.com

Mart Texas Directional Boring: Houston Black Clay, Mart Branch, Texas State Highway 164

Quick Answer: Can you get a line under Texas State Highway 164 or Mart Branch without cutting it? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Mart, Texas. The Yukon, Oklahoma main office is 316 road miles from Mart, near routes such as Texas Avenue. Houston Black soil is heavy clay that can cling to the reamer and grip pipe. We plan the bore around that ground and the specific crossing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mart bores at a glance

  • Incorporated city in McLennan County and Limestone County, Texas. Population 1,843 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 316 miles, about 6.1 hours of driving.
  • Ground: Houston Black soil is mapped on 76 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 164 and FM 939. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mart Branch.
  • Public water: City of Mart, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Texas State Highway 164 in Mart?

Trinity Boring Solutions takes directional boring work in Mart, McLennan County, including routes beside Texas State Highway 164 and Limestone Street. The Census Bureau Vintage 2024 estimate places Mart at 1,843 residents; we plan underground work around crossings such as Texas State Highway 164. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath roads or Mart Branch when the site calls for a trenchless crossing.

Our main office is in Yukon, Oklahoma, and Mart work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; we plan Mart bore work in McLennan County. With Oncor Electric Delivery Company and the City of Mart water system already serving this area, our strike free record matters around buried lines.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Houston Black soil mean for a Mart bore?

Mart is mapped mostly as Houston Black soil, so heavy clay is the main ground concern for a bore. The USDA soil survey maps Houston Black across 76 percent of the city and Heiden across 24 percent. Surface texture and texture at about 40 inches are clay throughout the mapped area, with an average clay content of 53 percent at that depth. These are mapped soil patterns, not test borings, so the exact route still needs field checks.

USDA soil survey, inside the Mart city limitsWhat is mapped
Soil series mappedHouston Black 76 percent and Heiden 24 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in Mart’s top five feet, and seasonal water tables and flood prone soils are not mapped there either. The USDA soil survey maps high steel corrosion risk across the area, so the line owner should consider casing and tracer wire materials; HDPE is unaffected by that soil concern. The geologic map names Pecan Gap Chalk of Campanian age, with limestone, carbonate, sandstone and claystone, but that does not locate rock along a particular bore.

How do we plan a bore through Mart clay in Houston Black soil?

For Mart’s Houston Black clay, we use a controlled drilling sequence to keep sticky cuttings from building on the reamer and to limit pressure near pavement on Texas Avenue.

  1. Houston Black clay can cling to a reamer and grip pipe, so we use thinner drilling fluid with polymer and ream in stages along Texas Avenue.
  2. Because heavy clay covers Mart’s mapped area, we watch fluid returns near pavement and pull pipe the same day the hole is opened.
  3. Before the drill approaches marked lines near the City of Mart water system, we hydrovac pothole them; paint shows position, not depth.
  4. We track the drill head from the surface and log depth and pitch, including on routes near Mart Branch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Mart bore cross near Limestone Street?

Mart has Texas State Highway 164 and FM 939 within its limits, so a crossing in either right of way needs a route and permit plan before drilling. Limestone Street is the longest named street at 2.13 miles in the city, followed by Texas Avenue at 1.6 miles and McLennan Avenue at 1.23 miles. These street lengths help identify a route, but the exact address determines whether a bore passes beneath pavement, a driveway or another marked utility.

CrossingTypeMapped extentWho has a say
Texas State Highway 164State highway1.6 roadway miles insideState highway office
FM 939State highway0.4 roadway miles insideState highway office
Mart BranchStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Hogpen CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Big CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Mart or within one mile outside its limits, and no mapped street and rail crossings are recorded. Mart Branch runs 1.1 channel miles within the city, with 8 mapped street crossings of named streams. Hogpen Creek and Big Creek are each 0.3 miles from the limits. No lakes or ponds are mapped within one mile, so a creek crossing is the main mapped water feature to plan around.

Who has to sign off on a Mart bore in McLennan County?

Mart’s Texas State Highway 164 and FM 939 are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Waco District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Existing highway pavement is bored or tunneled beneath, and TxDOT rules set cover depths by line type, with the permit able to require a different depth. Mart’s city streets belong to the city itself. A Mart Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already serving the City of Mart?

The City of Mart public water system uses surface water and reports 893 service connections serving 1,846 people. For electric service in McLennan County, utilities reporting to the EIA include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. The specific line owner is confirmed before an electric conduit bore, since the county list does not identify the provider at every Texas Avenue address.

Line ownerWhat it isSourceSize
City of MartPublic water systemSurface water893 connections, 1,846 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan County and Limestone CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mart’s median housing year at 1961; 49 percent of units were built before 1960, 43 percent from 1960 to 1999 and 8 percent in 2000 or later. Older blocks near McLennan Avenue may call for replacement bores, while newer service routes need their own utility checks. We hydrovac pothole marked lines on the path before drilling near the City of Mart water system or an electric line.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Mart in relation to Riesel and our Yukon office?

Mart is an incorporated city mainly in McLennan County, with 4 percent of its land in Limestone County. It covers 1.38 square miles, sits at 531 feet elevation and uses ZIP code 76664. Riesel is 8.2 miles southwest, while Hallsburg is 6.8 miles west. Bellmead, the nearest larger city, is 15.8 miles west, and Waco, the county seat, is 21.2 miles west. From our Yukon, Oklahoma main office, Mart is 316 road miles and a 6.1 hour drive, which affects mobilization for work on Texas State Highway 164.

Places near Mart

What boring work comes up around McLennan Avenue in Mart?

  • Highway crossing: A bore beneath Texas State Highway 164 avoids cutting existing pavement, with the route planned for the highway right of way.
  • Water service: A replacement line near the City of Mart system can be bored beneath a driveway or street instead of opened across it.
  • Fiber conduit: A route along Limestone Street can pass beneath pavement, with marked utilities exposed before drilling nearby.
  • Creek crossing: A Mart Branch bore needs a planned path beneath the channel and a check for federal jurisdiction.
  • Street service: A bore near McLennan Avenue can connect a line without opening the full street surface.
  • Electric conduit: Near Texas Avenue, we confirm the line owner before planning the bore and expose marked utilities along its path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Carpenter Street in Mart?

A map pin matters for a Mart quote because a route near Carpenter Street may have different pavement, utility and access conditions from one beside Mart Branch. Send the address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us check the route and identify the crossing points.

Houston Black clay is the first cost factor because sticky cuttings can call for staged reaming and careful fluid control. We also account for bore length, pipe or conduit size, utilities to expose, pavement near Limestone Street, pits, excavator time and sand backfill. A Mart Branch crossing can add planning, and mobilization reflects the 316 road miles from Yukon. High profile or emergency work near Mart Branch can change the scope, so we confirm crossing conditions before setting the bore plan.

Questions people ask about boring in Mart

Does Trinity take directional boring work in Mart and McLennan County, and who staffs it?

Yes, we take directional boring work in Mart and staff it with our own crews or crews from vetted drilling partners at satellite yards. We guide each Mart project from first call through the bore log, accounting for FM 939 crossing needs. For a route near Texas State Highway 164, the crew and plan are matched to the job.

Can you bore a line beneath Mart Branch in Mart?

A line can be planned beneath Mart Branch without cutting the channel. The stream runs 1.1 channel miles inside Mart, and the route needs site planning and a check for U.S. Army Corps of Engineers jurisdiction. Soil and utility conditions at the crossing also shape the bore plan.

For boring in Mart, who runs the public water system, and where does its water come from?

The City of Mart owns and runs the public water system, which uses surface water. Public records report 893 service connections serving 1,846 people. If your bore follows Texas Avenue, we locate and expose marked utilities before drilling near water lines.

Which electric utility should I ask about a conduit bore in Mart and McLennan County?

The electric line owner at the specific Mart address must be confirmed before planning a conduit bore. Utilities reporting service in McLennan County include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. The county list does not assign one provider to every address.

Who controls McLennan Avenue in Mart, and can a line go beneath it without a cut?

McLennan Avenue is a city street in incorporated Mart, so it belongs to the city. We can plan a directional bore beneath the pavement to avoid an open cut, subject to the route and utility checks. Marked lines along the street are exposed before the drill approaches.

Do older homes near Texas Avenue in Mart mean replacement bores are likely?

Mart’s housing stock has a median year built of 1961, and 49 percent of units were built before 1960. Those figures can make replacement work a consideration near Texas Avenue, but they do not establish the age or condition of a buried line. The route needs utility locating and field checks.

How far ahead should I call Texas811 for a Mart bore near Limestone Street?

For a Mart bore near Limestone Street, request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. For a Mart crossing on Texas State Highway 164, if our start moves more than 14 days past the original notice, we submit a new request. When marks near Limestone Street are worn or moved, we refresh them through Texas811 before continuing the Mart bore.

Does the distance from Yukon to Mart change a job near Bellmead?

Mart is 316 road miles and a 6.1 hour drive from our Yukon, Oklahoma main office; Bellmead is 15.8 miles west of Mart. That distance can affect mobilization and scheduling for a bore. The route, ground and crossings still determine the equipment and crew plan.

What affects the cost of boring beneath Texas State Highway 164 in Mart?

The price depends on the specific Mart job, including bore length, pipe or conduit size, Houston Black clay, utilities to expose and pavement at the highway crossing. Creek crossings, pits, excavator time, backfill and mobilization from Yukon also matter. We need the route and scope to assess those conditions.

Where the Mart facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mart

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mart, Texas

Type the address of your job in Mart. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mart

Same county: Waco · Hewitt · Robinson · Woodway · Lacy-Lakeview · McGregor · West · Beverly Hills · Lorena · Moody · Bruceville-Eddy · China Spring. All counties: Texas county list.